print on 120 gr paper

10 cm
3.9 in
numbers show edge ID
=mountain fold
=valley fold

Instructions for making the kingfisher
It is highly recommended to print the kingfisher on 80 gr paper, the branch on 120 gr paper.
What you need:
small scissors,
paper- or wood glue, a small knife, skewers, thin rope, piece of transparant plastic, two nails, acrylic paint or watercolour, thin paper.
Work carefully and take your time.
Allow each tab to dry before adjusting the next tab.

cylindershaped
This part is pushed
through the inside of the
kingfisher before
the head to the body is glued

rolled into
tube

The tip of the ‘V’-formed shape
is glued to the body
top side of tail is curved, bottom is flat

rolled into tubes

Push the tail through the inside of
the cilinder (which forms undertail and rump)

nails

wall

15cm 5.9in
Cover branch with pieces of
torn paper, paint with acrylics afterwards
1.5cm 0.6in
Piece of transparant plastic
10cm
4in

4.5cm
1.8in
20cm 8in
fish is attached to
thin wire 4cm 1.5in

10 cm
3.9 in

VF

VF
VF
VF

print on 80 gr paper
VF

= cut to white dot
= valley fold
= indicates tab id

www.johanscherft.com
Copyright Johan Scherft