Текст
IIIIIIIIIIHIIilllllllllll
V15191
& SAMSUNG
** Electronics
vus
PAL SECAM
HQ
SERVICE MANUAL I- —
MODEL : VK-350/VK-330
VK-320/VK-300
VIDEO CASSETTE RECORDER
SPECIFICATIONS
Format: VHS PAL standard AUDIO
Video Recording System: 4'd ; Double Azimuth 4 Rotary Heads Input: Output: Line; -8 dBm, 50 Kohm unbalanced Line; -4dBm, 1 Kohm unbalanced
Television System: Tape Width : 2'd ; 2 Rotary Heads, Helical Scanning System Luminance ; FM Azimuth recording Color; Down convened subcarrier phase shifted direct recording COR, DIRT standard (B/G, D/К System) 12.65 mm (1/2 inch) Wow-Flutter: Frequency Response: Receiving Channel: SP;0.4%Max LP;12%Max SP; 100Hz-8KHz LP; 100Hz-5KHz VHF LOW, VHF HIGH. UHF
Tape Speed : Record in g/Play back Time: SP; 2339 mm/sec LP; 11.69 mm/sec SP; 4 hours with E-240 type Power Requirement: Power Consumption : Operation Temperature: 100 -240V (AC 50/60Hz) Approx. 25 watts 41" F—104* F(5* C-40* C)
FF/REWTime: LP; 8 hours with E-240 type Less than 3 min 10 sec in REW, Less than 3 min Operation Humidity: Weight: 10%-75 % 5 Kg
Heads: 40 sec in FF with E-180 Video; Dimensions : 420 (W) x 873 (H) x 314 (D) mm
4'd - Double Azimuih 4 rotary heads
2'd - 2 Rotary head. Helical scanning system
Audio/Conirol; 1 stationary bead
Erase: 1 full track erase
VIDEO
Input: 0.5 to 2.0 Vp-p; 75 ohm unbalanced
Output: 1.0 Vp-p; 75 ohm unbalanced
Slgnal-to-Noise Ratio: SP; Better than 43 dB
LP; Beuer than 40 dB
Horizontal Resolution : SP; More than 240 Lines
LP; More than 220 Lines
Printed in Korea
MAR. 1993
1. GENERAL DESCRIPTION
1-1. SAFETY PRECAUTIONS
1. Before reiuming a Video Cassette Recorder to the
customer, always make a safely check of the entire
instrument, including, but not limited to the following
items:
a. Be sure that no built-in protective devices are defecuve
and/or have been defeated during servicing.
(1) Protecuve shields are provided on this chassis to protect
both the technician and the customer. Correctly replace all
missing protective shields, including any removed for
servicing convenience.
(2) When reassembling the instrument, be sure to pul back
in place all protecuve devices, including, but not limited to
nonmetallic control knobs, insulating, fish papers
adjustment and compartment covers/shields, and isolation
rcsistor/capacitor networks.
Do not operate this instrument or permit it to be
operated without all protective devices correctly
installed and functioning.
b. Be sure that there are no cabinet openings through which
an adult or child might be able to insert their fingers and
contract a hazardous voltage. Such openings include, bul
are not limited to, (1) excessively wide cabinet ventilation
slots, and (2) improperly fitted and/or incorrectly secured
cabinet covers.
c. Antenna Cold Check-With the instrument AC plug
removed from any AC source, connect an electrical jumper
across the two AC plug prongs. Place the instrument AC
switch in the on position. Connect one lead of an ohmmeter
to the AC plug prongs tied together and touch the other
ohmmeter lead in turn to each tuner antenna input exposed
terminal screw and, to each of the coaxial connectors.
(READING SHOULD NOT
BE ABOVE 0.5 mA)
EXPOSED METal
SURFACES
2-WIRE CODE
47) ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
plug as required)
AC Leakage Test
If the measured resistance is less than 1.0 megaohm or
greater than 5.2 megaohm, an abnormality exists that must
be corrected before the instrument is returned to the
customer. Repeat this test with the instrument AC switch in
the off position.
d. Leakage Current Hot Check-Wilh the instrument
completely reassembled plug the AC line cord directly into
a 220 (240V-UK) AC outlet. (Do not use an isolation
transformer during this test). Use a leakage current tester
or a metering system that complies with American National
Standards Institute (ANSI) C101.1 Leakage Current for
Appliances and Underwriters Laboratories (UL) 1410,
(50.7). With the instrument AC switch first in the on
position and then in the off position. Measure for current
from-a known earth ground (metal waterpipe, conduit, etc)
to all exposed metal pans of the instrument (antennas,
handle bracket, metal, etc), especially any exposed metal
parts that offer an electrical return path to the chassis. Any
current measured must not exceed 05 miiliamp. Reverse
the instrument power cord plug in the outlet and repeal test.
ANY MEASUREMENT NOT WITHIN THE LIMITS
SPECIFIED HEREIN INDICATE A POTENTIAL
SHOCK HAZARD THAT MUST BE ELIMINATED
BEFORE RETURNING THE INSTRUMENT TO THE
CUSTOMER OR CONNECTING ANTENNA OR
ACCESSORIES.
e. AC Leakage Test
Avoid shock hazards. The television instrument, accessory,
or cables (s) to which this VCR (VCP) is connected should
have the applicable sections of the leakage resistance
antenna cold check and the leakage current hot check
performed. Do not connect this VCR (VCP) to a TV
antenna, cable or accessory that exhibits excessive leakage
currents.
2. Read and comply with all caution and safety related
notes on or inside the VCR (VCP) cabinet and chassis.
3. Design Alteration Warning-Do not alter or add to the
mechanical or electrical design of this Video Cassette
Recorder (Player). Design alterations and additions,
including, but not limited to circuit modifications and the
addition of items such as auxiliary audio and/or video
output connections, might alter the safety characteristics of
this instrument and create a hazard to the user. Any design
alterations or additions may void the manufacturer’s
warranty and may make you,the servicer responsible for
personal injury or property damage.
1-3. REPLACEMENT PROCEDURE FOR LEADLESS (CHIP) COMPONENT
ж The following procedures are recommended for the replacement of the leadless components used in this unit.
1. Preparation for replacement
a. Soldering Iron
Use a pencil-type soldering iron that uses less than
30 watts.
b. Solder
Eutectic solder (Tin 63%, Lead 37%) is recommended.
c. Soldering time
Do not apply heat more than 4 seconds.
d. Preheating
Leadless capacitor must be preheated before
installation. (130*C-150* C, for about two minutes).
3. Removing the chip component (TYansistors, Diodes)
1) Melt the solder of one lead
| Note:
' a. Leadless component must not be reused after removal,
b. Excessive mechanical stress and rubbing of the
component electrode must be avoided.
2. Removing the leadless component
(Resistors, Capacitors)
Grasp the leadless component body with tweezers and
alternately apply heat to both electrodes. When the
solder on both electrodes is melted, remove leadless
component with a twisting motion.
Note:
a. Do not attempt to lift the component off the board until
the component is completely disconnected from the
board by a twising action.
b. Take care not to break the copper foil on printed board.
3) Simultaneously heat solder of the two remaining leads
and lift part to remove.
4. Installing the Leadless (chip) Component
1) Presolder the contact points of the circuit board.
Press the part downward with tweezers and solder both
electrodes as shown below.
Note: 4Ж. , . :... .
Do not glue the replacement leadless component to the
circuit board.
I
5. Removing of Flate ICs
(Recommendable manner)
1) For removing solder chips from ICs pins, use a solder
remover or a wiry solder absorber.
2) Heat the ICs tips evenly by moving the chip IC
replacing tool around them, and detach the ICs leads
with a tool in the way of using a lever.
3) Do not reuse ICs removed once (Discard them).
1-4
1-4. HOW TO REPLACE LEADLESS (CHIP) COMPONENT
1. Check the followings before SJVI.D TYoubleshooting
• Cracked or Chipped Component Body
* Cracked or Separated Solder Joints
• Peeling end Terminations or Fractured Leads
2. S.MJ) (Surface Mounted Devices) Identification
I) Chip Resistor Identification
ж Standard Chip Resistor Code
* Rejection of Solder from Copper Pads or Component
* Foreign Matter on Copper Pads
* Solder Bridges
= 12 x103(1000) = 12000 Q
= 12Kq
= 47 x 10°(1) =47q
= CHIP JUMPER = 00
2) Chip Capacitor Identification
ж Standard Two Place Code
= 2.2 x 103 (1000)
= 2200 pF
MULTIPLIER (0-9)
Examples
S2 = 4.7 x 100 = 470 pF
b0 = 35x1.0 = 3.5 pF
VALUE (1st & 2nd SIG. DIGITS)
- SEE TABLE 1
VALUE (33 VALUE SYMBOLS) - UPPER AND LOWER CASE LETTERS MULTIPLIER
O-nmootD > I I I I I I I 00 O) cn w N> -* о H - 2.0 J - 2.2 К — 2.4 a — 2.5 L - 2.7 M - 3.0 N — 3.3 b — 3.5 p — 3.6 Q — 3.9 d — 4.0 R — 4.3 e — 4.5 S — 4.7 I — 5.0 T — 5.1 U — 56 m — 6.0 V - 6.2 W - 68 n — 7.0 X — 7.5 t — 8.0 Y — 8.2 у — 9.0 Z - 9.1 0= x 1.0 1= x 10 2= x 100 3= x 1000 4= x 10000 5= x 100000 etc.
TABLE 1
1-5
-Х;
ж Alternate Two Place Code
Values below 100 pF - Value Read Directly
Values 100 pF and above - Letter / Number Code
05
= 5 pF
= 10x 10
= 100 pF
MULTIPLIER (1-9)
VALUE (1st & 2nd SIG. DIGITS)
- SEE TABLE 2
82
= 82 pF
N3
= 33 x 1000
= 33000 pF
= 0.33 uF
VALUE (24 VALUE SYMBOLS) - UPPERCASE LETTERS ONLY MULTIPLIER
A — 10 F — 16 L - 27 R — 43 W — 68 1 = X 10
В — 11 G — 18 M - 30 S — 47 X — 75 2 = x 100
C — 12 H - 20 N - 33 T — 51 Y — 82 3 = x 1000
D — 13 J - 22 P — 36 и — 56 Z - 91 4 = x 10000
E — 15 К - 24 Q — 39 V - 62 5 = x 100000 etc.
-- TABLE 2
sk Standard Single Place Code
r- W (ORANGE)
= 4.7 x 1.0=4.7 pF
Examples
R (Green) = 3.3 x 100 = 330 pF
COLOR-MULTIPLIER
7 (Blue) = 8.2 x 1000 = 8200 pF
SYMBOL-VALUE
- SEE TABLE 3
VALUE (33 VALUE SYMBOLS) - UPPER AND LOWER CASE LETTERS
MULTIPLIER
A — 1.0 В - 1.1 C — 1.2 D — 1.3 E - 1.5 H - 1.6 I - 1.8 J - 2.0 К - 2.2 L - 2.4 N - 2.7 0 — 3.0 R — 3.3 S — 3.6 T — 3.9 V — 4.3 W - 4.7 X - 5.1 Y - 5.6 Z - 6.2 3 — 6.8 4 — 7.5 7 — 8.2 9 — 9.1 ORANGE = x 1.0 BLACK = x 10 GREEN = x 100 BLUE = x 1000 VIOLET = x 10000 RED = x 100000
-- TABLE 3
1-6
1-5. CLEANING AND LUBRICATION
1-5-1. CLEANING TAPE MECHANISM
Periodic cleaning is necessary to insure continued excellent
performance of the tape mechanism. To clean the following
pans, patch and solvent are available.
1. Capstan shaft.
2. All tape guide posts.
3. Clitch pulley.
4. Pinch roller.
5. Belt capstan.
6. Capstan motor pulley.
1-5-2. CLEANING OF ROTATING & STATIONARY
HEADS
To clean video heads, full erase head, audio/control (A/C)
head we recommend to use head cleaning kit and solvent
Note: When cleaning video heads, move the cleaning
stick in the direction of head rotation. Wiping in a
vertical direction may damage the heads.
Press a chamois cloth which has been dipped in cleaning
fluid lightly against the rotaing cylinder assembly, then do
the cleaning by slowly rotaing upper cylinder ass'y by
hand.
Use grease on the following parts every 1,000 hours of
operations. (See exploded view for location)
1. Between base pole assembly (L, R) and main base,
2. Gear escalator.
3. Gear E/J drive.
4. Gear loading L, R.
5. Slide main.
6. Lever tension control.
7. Lever shift
Oil may be required for the following parts after 1,000
hours of operation.(See exploded view for location)
Main base
1. Arm tension molding.
2. Shaft reel disk L, R molding.
3. Shaft gear relay T, SI, S2, S3 molding.
4. Shaft clutch
5. Shaft gear review.
Other parts which are not listed above do not be required
lubrication, except when parts are replaced.
Use appropriate oil or grease as indicated on exploded
view.
Note: Never try to clean by using the motor to turn it
1-5-3. LUBRICATION TAPE MECHANISM
The tape transport mechanism is properly lubricated at the
factory.
In normal use cycles, and with average environmental
conditions, additional lubrication should not be required
during the first year of operation.
Depending on the frequency of use and environmental
conditions, periodic lubrication may be required.
When relubricating, remove old lubricant first, then
sparingly apply new lubricant(Excessive lubricant may be
transferred to other assemblies causing malfunction).
1-7
1-6. ABBREVIATIONS
X2 : Double DE-EMPH : De-Emphasis
4.43MHz : Color Sub Carrier DET : Detector
DEV : Deviation
DLYD : Delayed
ACC : Automatic Color Circuit DM : Drum Motor
ACK : Automatic Color Killer DEMOD : Demodulator
ADD : Adder D.D : Direct Drive
AFC : Automatic Frequency Control
AFT : Automatic Fine Tuning
AGC : Automatic Gain Control E-E : Electronic-io Electronic
ALC : Automatic Level Control EMPH : Emphasis
AMP : Amplifier ENV : Envelope
APC : Automatic Phase Control EQ : Equalizer
AUX : Auxiliary EPS : Easy Programming System
BATT Battery F.ADV : Frame Advance
BD Burst Deemphasis F-V : Frequency to Voltage Converter
BE Burst Emphasis F.FWD : Fast Forward
BH Power Supply for Selecting VHF FH : Frequency Horizontal
High Band FG : Frequency Generator
BL Power Supply for Selecting FM : Frequency Modulator
VHF Low Band FSC : Frequency Sub Carrier
BPF Band Pass Filter FWD : Forward
FC : Frequency Center
FL : Frequency Low
C.FG : Capstan Frequency Generator
C.SYNC : Composite Sync
CAFC : Capstan Auto Frequency Control GEN Generator
CAPC : Capstan Auto Phase Control GND Ground
CATV : Cable TV
CAR : Carrier
CAP : Capstan HPF High Pass Filter
CCD : Charge Coupled Device
CH : Channel
CHAR. : Character IF : Intermediate Frequency
CHROMA : Chrominance IR : Infrared Receiver
CM : Capstan Motor
COMP : Comparator
CST : Cassette LED : Light Emitting Diode
C-ERR : Capstan Error LIM : Limiter
CTL : Control LPF : Low Pass Filter
C.PG : Capstan Pulse Generator LUMA : Luminance
CUR.EMPH : Current Emphasis LCD : Liquid Crystal Display
LNR : Linear
D.FG : Drum Frequency Generator
D.O.C : Drop Out Compensator MIX Mixer
D.PG : Drum Pulse Generator MM Monostable Multivibrator
D/A : Digital-to-Analog MTS Multi Channel TV Sound
D/C : Dark/Clip MEM Memory
D.AFC : Drum Auto Frequency Control MFT Manual Fine Tuning
D.APC : Drum Auto Phase Control
N.C No Connection
1-8
osc OTR OSP OSD : Oscillator : One Touch Recording : On Screen Programme : On Screen Display TP TRK UL : Test Point : Tracking : Unloading
PB : Play Back
P.C : Power Control VT : Voltage Tuning
PG : Pulse Generator VLP : Vertical Lock Pulse
PIF : Picture Intermediate Frequency V-REF : Voltage Reference
PLL : Phase Lock Loop V-SYNC : Vertical Sync
PRG : Programme VCO : Voltage Controlled Oscillator
PWM : Pulse Width Modulation VCR : Video Cassette Recorder
PWR : Power VIF : Video Intermediate Frequency
P/S : Pause/Still VPS : Video Programming System
PD : Power Detector VHS : Video Home System
VXO : Voltage Controlled Crystal Oscillator
VSS : Voltage Super Source
REG Regulator VISS : VHS Index Search System
REC Record
REC.SAF Record Safety
REW Rewind w/c White /Clip
RF Radio Frequency W/D White/Dark
REV Reverse
RECT Rectifier
REF Reference Y/C Luminance/Chrominance
SC : Simul-Cast uP • Microprocessor
SC : Sub-Camer
SCK : Shift Clock
SDA : Serial Data
SIF : Sound Intermediate Frequency
S.M.D : Surface Mounted Devices
S.M.P.S : Switching Mode Power Supply
SP : Standard Play
SW25Hz : Head Switching Pulse
SYNC : Synchronizing Signal
SYSCON : System Control
STB : Strobe
SI : Serial Input
SO : Serial Output
sw : Switch
1-9
9. SCHEMATIC DIAGRAMS
Page
9-1. Regulator........................... 9-2
9-2. Power............................... 9-3
9-3. System Control...................... 9-4
9-4. Servo............................... 9-6
9-5. Y/C -1 (Pre-Amp).................... 9-8
9-6. Y/C-2................................ 9-10
9-7. Audio................................ 9-12
9-8. Tuner................................ 9-14
9-9. IF-PACK.............................. 9-15
9-10. O.S.P (OPTION)....................... 9-16
9-11. IZO(SUBPCB).......................... 9-18
9-12. I/O (MAIN PCB)....................... 9-19
9-13. Function/Timer (VK-350/VK-320)....... 9-20
9-14. Function/Timer (VK-330/VK-300)....... 9-21
9-15. LCD Remote Control................... 9-22
9-16. W/O LCD Remote Control............... 9-23
9-1
2. DISASSEMBLY
2-1. INSTRUMENT DISASSEMBLY
In case of trouble, etc. necessitating dismantling,
please dismantle in the order shown in the illustrations
Reassemble in reverse order.
(Top View)
2-1-1. Top Cabinet Removal
REMOVE 5 SCREWS
(BH; 2-4X16 BLACK)
(Bottom View)
2-1-2. Bottom Cover Removal
2-1
2-2. CIRCUIT BOARD DISASSEMBLY
Notes : :
I. When removing chassis umt assembly.take extreme
care not todamagethe Main PCB ftpnL ;i i
2.WhenreinstallingDeckontheMain PCB, '* ' '5i
: takeextreme care not: to damagb sensor
2-2-3. Chassis Unit Removal
t(BH ; 2-4X12-YELLOW)
CN602
ГЮСМ
2-2-1. Regulator Ass'y Removal
„ REMOVE 2 SCREWS
T (BH ; 3X10 - YELLOW)
2-2-2. Function/Timer Circuit Board Removal
2-2
OSP CIRCUIT BOARD (OPTION)
го
W
MAIN CIRCUIT BOARD
* Circuit Boards Location
2-4. HOUSING ASS'Y REMOVAL & REASSEMBLY
SIDE CHASSIS V ASS’Y
2-4-1. Housing Ass'y Removal
1. Remove four (4) screws (2).
2. Lift up the housing ass'y in the direction of arrow
?-----
—- — CP
g TWO SCREWS
MAIN BASE
~ F/L HOUSING
DETAIL A
Fig. 4 Housing Ass’y Removal
2-6
2-4-2. Cassette Holder Ass'y & Side Chassis "L", ”R" Removal
1. Remove two (2) screws ф.
2. Lift up the upper chassis (2) and the cassette holder ass у (3) in the direction of arrow (A).
3. Remove the side chassis "L", "R" (5) from the shaft arm ass у tn the direction of arrows (B).
Fig. 5 Cassette Holder Ass'y & Side Chassis "L", "R" Removal
2-4-3. Joint Gear & Rack Gear Removal
1. Pull the rack gear (1) in the direction of arrow (A) to the
end.
2. Remove one screw @ and then the joint gear (3).
3. Remove the rack gear (T) toward arrow (B).
SIDE CHASSIS “R"
X ONE SCREW
(B)
’ig. 6 Joint Gear & Rack Gear Removal
2-4-4. Reinstallation of Rack Gear and Joint Gear
Reinstallatiori and Timing of Rack Gear and Joint Gear
1. Assemble the rack gear® to the side chassis "R".
2. Pull the rack gear ® in the direction of arrow to the
end.
3. Install the joint gear so that the slot # 1 of joint gear ®
is aligned with the tooth #1 of rack gear ®.
Note: When timing is correct the key-way will fit into
the notch automatically, i ;
3) RACK GEAR
TOOTH #1(RACK GEAR)
Fig. 7 Reinstallation and Timing of Rack Gear and Joint Gear
Timing Confirmation of Rack Gear and Joint Gear (Eject mode)
1 Push the rack gear ® in the direction of arrow to the
end.
2 Make sure that the tooth #12 of joint gear ® and the
Timing Point of rack gear ® are aligned correctly as
shown in Fig. 8.
SIDE CHASSIS “R"
X JOINT GEAR
RACK GEAR
TIMING POINT
Fig. 8 Timing Confirmation of Rack Gear and Joint Gear
2-8
2-4-5. Reassembly of Housing Ass'y
1. After pushing the rack gear in direction of arrow to the
end, insen the pin of the arm gear into the hole of side
chassis "R”.
2. Align the slot #1 (arrow mark) of the arm gear® with
the tooth #3 of the joint gear (2).
(Refer to timing in Fig. 9)
3. Install the side chassis "L" so that the shaft arm pin goes
into the hole in the side chassis "L".
4. Turn the shaft arm to up-position and drop the cassette
holder into the arm grooves.
5. Install the upper chassis and secure with two (2) screws.
2-4-6. Reinstallation of Housing Ass'y & Deck Ass'y
® JOINT GEAR
Fig. 9 Reassembly Joint Gear & Arm Gear
Note : Make sure deck is in the eject position.
1. Assemble the housing ass'y while pushing the rack gear
forward to align the slot #1 of gear eject drive © and the
tooth #1 of rack gear®. (Refer to Detail A)
2. Install the housing ass'y and then tighten four (4) s<
(Sec Fig. 4)
@ GEAR EJECT DRIVE
DETAIL A
(SIDE VIEW)
Fig 10 Reinstallation of Housing Ass у
(TOP VIEW)
2-9
2-5. CYLINDER ASS'Y REMOVAL & REASSEMBLY
2-5-1. Cylinder Ass'y Removal from Main Base
1. Release the F.P.C cable (T) from Pre-Amp PCB (CN301)
and disconnect the lead connector ass'y (5) from the
cylinder PCB.
2. Remove three (3) screws (3) securing the base cylinder
and the main base.
3. Lift the cylinder ass'y (4) in the direction of arrow.
2-5-2. Exploded View of Cylinder Ass'y
REMOVE TWO SCREWS
PWB- UPPER CYLINDER
CAUTION : Take extreme сзге when removing the
cylinder ass'y. Do not touch the video bead tips during |
8егпсш&Ы|||Шр<:-C ChC ..
Fig. 11 Cylinder Ass'y Removal
REMOVE MOTOR-STATOR
REMOVE THREE SCREWS
DAMPER
REMOVE UPPER
CYLINDER ASS'Y
— RELEASE F.P.C CABLE
REMOVE THREE SCREWS
REMOVE THREE SCREWS
---REMOVE MOTOR-ROTOR
REMOVE TWO SCREWS
Fig. 12 Exploded View of Cylinder Ass'y
2-10
2-5-3. Upper Cylinder Ass’y Removal
2-5-4. Lower Cylinder Ass’y Removal
1. Remove two (2) screws ® from the upper cylinder ass'y
2. Unsolder the PWB-Upper cylinder © from the upper
cylinder ass’y (3) and remove the upper cylinder ass'y @
from the cylinder ass'y. (See Fig. 14)
Fig. 13 Upper Cylinder Ass'y Removal
1. Remove three (3) screws ® from the base cylinder (2).
2. Lift up the lower cylinder ass'y (3) from the base cylinder
©BASE CYLINDER
LOWER CYLINDER ASSY
©THREE SCREWS
Fig. 15 Lower Cylinder Ass’y Removal
4 HEAD
UNSOLDER TO REMOVE
(8 POINTS)
Fig. 14 PWB Upper Cylinder Top View
2-11
2-5-5. Cylinder Motor Removal
2-5-6. Assembly of Lower Cylinder
1. Remove three (3) screws (J) from the base cylinder (2).
2. Remove two (2) screws (3) from the damper ©.then
remove the damper© and the motor-rotor®.
3. Remove three (3) screws © from the motor-stator ©
and take it out.
Note : Mark rotor position to insure correct phase
orientation upon reinstallation.
1. Tighten three (3) screws with the motor-stator.
(Refer to Fig. 16)
2. Reinstall the motor-rotor, damper and secure with two
(2) screws. (Refer to Fig. 16)
Note: Make sure that the hole of bush cylinder on .
lower cylinder and the hole of motor rotor are aligned
correctly as shown in Fig. 17. • * H .
3. Reinstall the lower cylinder to the base cylinder and
secure with three (3) screws.
Note: Align two (2) base cylinder pin before reinstalling.
Fig 17 Bush Cylinder-1 & Ммог Rotor Timing
LOWER CYLINDER ASS'Y
16 Cylinder Motor Removal
2-12
2-5-7. Assembly of Upper Cylinder
2-5-8. Assembly of Cylinder Ass'y
1. When installing the upper cylinder, make sure green
color (CHI) goes to CHI head tip position on lower
cylinder.
2. Tighten two (2) screws on the upper cylinder.
(Refer to Fig. 13)
1. Reinstall cylinder ass'y on the main base.
2. Tighten three (3) screws securing the base cylinder and
the main base.
3. Reconnect EP.C cable to the Pre-Amp PCB and the lead
connector ass'y to the bottom cylinder PCB.
Note : Timing of the upper cylinder PCB.
UPPER CYLINDER
(BOTTOM SIDE)
CH1 HEAD TIP
CH2 HEAD TIP
UPPER CYLINDER
(BOTTOM SIDE)
Fig. 13
GREEN
COLOR
WHITE
COLOR
WHITE
COLOR
LOWER CYLINDER
(TOP SIDE)
SUT SIDE
2 HEAD
4 b
Fig. 14 PWB Upper Cylinder
2-13
2-6-3. Full Arm Tension Ass'y Removal
1. Remove the spring brake sub ”L" ф.
2. Lift up the brake sub "L” (2) while pushing the clip
brake sub”L" (3) in the direction of arrow.
2) BRAKE SUB “L
ф SPRING BRAKE
SUB "L"
1. Take off the spring tension ф.
2. Push the pin arm tension @ releasing the clip in the
direction of arrow (Bottom View).
3. Lift up the full arm tension ass'y (3).
—-CLIP
Fig. 21 Full Arm Tension Ass'y Removal
— X PIN ARM
TENSION
Fig. 19 Brake Sub '"j
2-6-2. Gear Relay S2 & SI Removal
1. Remove the washer slits ф.
2. Lift up the gear relay S2 (2) and SI (3).
2-6-4. Reel Disk "L" Ass'y & Gear Relay S3 Removal
ig. 20 Gear Relay S2 & S1 Removal
1. Remove the washer slit (А) ф.
2. Lift up the reel disk "L" ass'y @ and the washer plain®.
3. Remove the washer slit (В) ф.
4. Lift up the gear relay S3
I WASHER SLIT (AJ-®
3> WASHER PLAIN--| WASHER SLIT
— ф GEAR RELAY S3
'g-
2-14
2-6-5. Brake Sub "R" Ass'y Removal
1. Remove the spring brake sub "R“ (f)-
2. Lift up the brake sub "R” ass'y @ while pushing the
clip brake sub "R" (3) in the direction of arrow
4^—ф SPRING BRAKE MAIN
—©BRAKE MAIN “L” ASS’Y
i BRAKE MAIN “R* ASS’Y
(B)
CLIP-KJ^^
(A) BRAKE MAIN “L" BRAKE MAIN “R"
DETAIL A DETAIL В
CLIP
Fig. 24 Brake Main "L” & ”R" Ass’y Removal
Fig. 23 Brake Sub "R" Ass'y Removal
2-6-6. Brake Main "L" & "R" Ass’y Removal (Fig. 24)
1. Remove the spring brake main (J).
2. Lift up the brake main "L" ass’y @ while pushing the
clip in the direction of arrow (A). (Detail A)
3. Lift up the brake main "R" ass'y ® while pushing the
clip in the direction of arrow (B). (Detail B)
2-6-7. Reel Disk "R" Ass'y & Gear Relay "T"
Removal (Fig. 25)
1. Remove the washer slit (A) (£).
2. Lift up the reel disk "R" ass у ®.
3. Lift up the washer plain (3).
4. Remove the washer slit (B) ®.
5. Lift up the Gear Relay T” (5).
ф WASHER SLIT(A)
© WASHER PLAIN
© REEL DISK
“R” ASS’Y
Fig. 25 Reel Disk "R” Ass'y & Gear Relay "T" Removal
® GEAR RELAY T
2-15
2-6-8. Idler Sub Ass'y Removal
2-6-9. Lever REC SAV Removal
1. Remove the washer slit ф. I - Remove the spring record S/W ф.
2. Lift up the idler sub ass’y ®. 2. Lift up the lever record S/W @ while pushing the clip
tn the direction of arrow.
Fig. 27 Lever REC S/W Removal
2-16
2-7. LOADING & CAPSTAN MOTOR ASS'Y REMOVAL & REASSEMBLY
2-7-1. Belt Capstan Removal
Remove the belt capstan ®.
Ф BELT CAPSTAN
Fig. 28 Belt Capstan Removal
2-7-2. Motor D/D Capstan Removal
2-7-3. Clutch Ass'y Removal
1. Remove the washer slit ф.
2. Lift up the clutch ass'y (2).
3. Remove the washer plain (3).
— ф WASHER SLIT
—@ CLUTCH ASS’Y
i----@ WASHER PLAIN
Fig. 30 Cluich Ass'y Removal
1. Remove three (3) screws ф. (Top View)
2. Lift up the motor D/D capstan (2). (Bottom View)
(BOTTOM VIEW) (TOP VIEW)
Fig. 29 Motor D/D Capstan Removal
2-7-4. L/D Unit Ass'y & Gear Eject Drive Removal
1. Remove three (3) screws ф holding the loading unit
ass'y (2).
2. Lift up the loading unit ass'y (2).
3. Lift up the gear eject drive (3).
ф THREE SCREWS
Fig. 31 L/D Unit Ass’y & Gear Eject Drive Removal
2-17
L2-7-5. Slide Main Removal
2-7-7. Slide LB Ass'y Removal
1 Remove the screw (T) and washer slit (2).
2 . Release the clip (3) holding the slide main (T) and then
lift up the slide main (J).
1. Remove the spring brake sub (f).
2. Lift up the slide I.B ass'y @ while pushing the slide I.B
ass’y @ to the end of the slot in the direction of arrow.
® SLIDE MAIN
I-® SCREW
©CLIP
® SLIDE I.B ASS’Y
S/P BRAKE SUB
DETAIL C
Note: These two slots are the reason why you must push
I-B ass'y in the direction of arrow.
'ig. 32 Slide Main Removal
MAIN BASE
12-7-6. Brake D/D Capstan Ass'y Removal
MAIN BASE
LB SLIDE ASSEMBLY
DETAIL A DETAIL В
1. Remove the spring brake capstan (1).
2. Tum the brake D/Dcapstan ass'y ©clockwiseand then
lift up it while pushing clip in the direction of arrow.
Fig. 34 Slide I.B Ass'y Removal
1-7-8. Lever Shift Removal
;(3} BRAKE D/D
CAPSTAN ASS’Y
©S/P BRAKE CAPSTAN
® CLIP
Fig. 33 Brake D/D Capstan Ass’y Removal
I. Remove the spring lever shift ®.
2. Lift up the lever shift®.
® SPRING LEVER
SHIFT
-® LEVER SHIFT
Fig. 35 Lever Shift Removal
2-18
2-7-9. Lever Tension Control Removal
1. Lift up the lever tension control ®.
2-7-11. Review Arm Ass'y Removal
1. Remove the washer slit ®.
2. Lift up the full review arm ass'y
Fig. 36 Lever Tension Control Removal
D FULL REVIEW ARM ASS'Y
Г “1 -------Ф WASHER SLIT
—H REVIEW ARM ASS’Y
REVIEW
^□“SPRING REVIEW
Fig. 38 Review Arm Ass'y Removal
2-7-10. Gear Loading ”L", "R" Ass'y Removal
1. Lift up the gear loading "R" ass'y ®.
2. Lift up the gear loading "L" ass’y (3) while pushing the
gear loading “L" clip @ in the direction of arrow.
2-7-12. Drive Cam Pinch Ass'y Removal
@ GEAR LOADING “L” CLIP
MAIN BASE
1. Remove two (2) screws ®.
2. Lift up the drive cam pinch ass'y ®.
DETAIL A
Fig. 39 Drive Cam Pinch Ass'y Removal
Fig. 37 Gear Loading "L' R" Ass’y Removal
2-19
2-7-13. Pinch Roller Unit & Gear Escalator Removal
1. Remove the spring pinch roller (J).
2. Remove the washer slit (2).
3. Lift up the arm pinch ass'y (3).
4. Lift up the holder escalator ф and the gear escalator (5).
Bottom View of Drive Pinch Ass’y
Fig. 41 Timing of Gear Cam Drive, Gear Cam Pinch &
Gear Relay Pinch
Top View of Drive Pinch Ass’y
Fig. 40 Pinch Roller Unit & Gear Escalator Removal
2-7-14. Reassembly of Unit Drive Pinch Ass'y and
Gear Escalator
1. Align the hole of the bracket pinch drive ф with the
hole of the gear cam drive ®.
(Refer to timing (A) in Fig. 41)
2. Align the hole of the bracket pinch drive ф with the
hole of the gear cam pinch (3).
(Refer to timing (B) in Fig. 41)
3. Align the protrusion on the side of the gear relay pinch
@ with the hole of the gear cam drive®.
(Refer to timing (C) in Fig. 41)
4. Install the gear escalator on the shaft and align the holes.
(Refer to timing in Fig. 40)
5. While installing align the arrow mark of the gear cam
pinch (3) with the hole of the gear escalator (5).
(Refer to timing (D) in Fig. 42)
6. When aligning the timing (D). be sure to line up the
timing (А), (В), (C).
7. Install the two (2) screws.
Fig. 42 Reassembly of Drive Pinch Ass'y &
Gear Escalator
2-20
2-7-15. Reassembly of Full Review Arm Ass'y
2-7-16. Reassembly of Gear Loading "L", "R" Ass'y
1. Assemble the full review arm ass'y (D so that the gear
review (2) is touching the review stopper (3) as shown in
Fig. 43.
2. Install the washer sliL
1. Reassemble the gear loading L/R ass'y in the eject
mode while aligning the timing mark.
(Refer to Fig. 44)
TIMING
ALIGN TWO ARROWS
Fig. 44 Reassembly of Gear Loading "L". “R” Ass'y
FULL REVIEW ARM ASS'Y
Fig. 43 Reassembly and Timing of Full Review Arm Ass'y
2-7-17. Timing of Slide Main
1. Install the brake D/D capstan, lever tension control and slide I.B ass’y.
2. Install the slide main between brake D/D capstan and brake main "L", while pulling the brake D/D capstan and the brake
main"L" toward arrow (A) and (B) respectively.
3. At the same time, make sure the brake sub "L” and the pole base is located as shown in the Fig. 45.
4. Install the one screw.
Fig. 45 Timing of Slide Mam
2-21
2-7-18. Reassembly and Timing of Program SAV & Gear Master
1. Align two arrows on the program SAV ф. (Refer ю timing (A))
2 After aligning timing (A) completely, install the gear master® so that the boss on the program SAV ф is inserted into the
small hole of gear master (2). (Refer to timing (B))
3. Install the gear worm wheel and then washer slit.
Fig. 46 Reassembly and Timing of Program SAV & Gear Master
2-7-19. Timing of Gear Master & Gear Eject Drive
1. Install the gear eject drive.
2. Install the loading unit and align the slot #2 of the gear eject drive ф with the hole of the gear master
(Refer to liming (A) tn Fig. 47)
3. At this lime, make sure that the arrow marks of lhe gear relay pinch © and the gear master ® are aligned correctly.
(Refer to liming (B) in Fig. 47)
TIMING (A)
Fig. 47 Timing of Gear Master & Gear Eject Drive
2-22
TAI TRAN! О TA! YR MOVAI
Я- Pole
Removal
Pol
4aj /al Fi
(1) holdint ihe full erase head (2).
Ider 5) rnm ihe. head ignei
the head magne /Е
Head emoval Fig
em< ws
ONE SCREW
istal
rse ’dei
3. MECHANICAL ADJUSTMENT
3-1. TAPE TRANSPORT SYSTEM
The tapetransport system has been adjusted precisely in the factory; Alignment is not necessary except for the
followings: Л'МЧ :: -JlS;'.'' - <.r.
>Ш^Йе««ео. • ’t......
•Tapedamage.; C: / :
• Parts replacement in the tape transport system. * ЯВ
3-1-1. Location of Tape Transport Adjustment (Adjustment Reference)
Lower flange height of tape guide is used as the basic reference for the transport adjustment
To keep height of the tape guide, do not apply excessive force onto the main base to prevent damage.
S-GUIDE ROLLER
T-GUIDE ROLLER
- X-POINT LOCKING SCREW
TAKE UP REEL DISK
Fig. Location of Tape Transport Adjustment
MAIN BASE ТО1-Е TENSION S-SLANT POLE | T-SLANT POLE CAPSTAN SHAFT
F/E HEAD CYLINDER TAPE GUIDE
Fig. 2 Tape Travel Diagram
3-1
3-1-2. Tape Transport System Adjustment
1) Pre-adjustment
When the part(s) are replaced, perform required
adjustments by referring to procedures for the tape
transport system. When the part (s) are replaced, the tape
path may be changed.
First run a E-180 tape and make sure excessive tape
wrinkle does not occur at each tape guide.
1. If tape wrinkle is observed at the S, T-guide rollers, turn
the S,T-guide rollers until wrinkle disappears.
2. If the tape wrinkle is still observed at the tape guide,
perform the tilt adjustment of the A/C head.
2) Adjustment procedure
1. A/C head assembly adjustment
Test Point: W3V01 (Envelope)
W3V02 (H'D SW - Trigger)
W3V03 (CTL Pulse)
TP4301 - 2PIN (Audio Out)
Test Tape : SR2-2 (Color Bar; 1KHz)
SR1-2 (Mono Scope ; 6KHz)
Blank Tape (E-240)
Fig. 4 Location of A/C Head Adjustment Screw
AUDIO HEAD
VIDEO TAPE
Fig. 3 Location of Test Point (Main PCB)
a. A/C head height adjustment
1. Run the alignment tape SR2-2 in the playback mode.
2. Observe surface of the audio head using a dental mirror.
3. Turn screw (А), (В), (C) clockwies or counterclockwise
until the gap of lower tape edge and the lower edge of
the control head is about 0.25 mm.
(Refer to Fig. 4 and 5)
I
CONTROL HEAD
Fig. 5 A/C Head Height Adjustment
b. A/C head tilt adjustment
1. Playback a E-240 tape and observe position of the tape
at the lower flange of tape guide.
2. Confirm that there is no curl or wrinkle at the lower
flange of tape guide as shown in Fig. 6 (B).
3. If a curl or wrinkle of the tape has occured, slightly turn
the screw (C) tilt adjust on the A/C FTd ass'y clockwise
until it disappears as shown in Fig. 6 (B).
4. Reconfirm the A/C head height.
(A) (B)
l—J
(GOOD)
(BAD)
Fig. 6 Tape Guide Check
3-2
c. Audio azimuth adjustment
1. Load alignment tape (SRI-2 ; 6KHz) and playback the
6KHz signal.
2. Connect channel-! scope probe to 2pin of TP4301 on the
I/O PCB.
3. Adjust screw (B) vertically to achieve maximum audio
level. (See Fig. 4)
d. A/C head position (X-Point) adjustment
1. Playback the SRI-2 alignment tape.
2. Connect CH-1 scope probe to W3V03.
3. Connect CH-2 scope probe to W3V02 and trigger head
switching pulse.
4. Set tracking preset to 15msec (4 head) (0.5msec ; 2 head)
using the "TRK" (Tracking) button A/V of remote
control. (Refer to Fig. 7 and 8)
5. Connect CH-1 scope probe to W3V01.
6. Turn the screw (E) counterclockwise. (See Fig. 4)
7. Insert the adjusting driver (X-Point) into the hole (F) of
main base and adjust the A/C head ass'y so that envelope
waveform is maximum amplitude and then tighten the
screw (E).
2. Linearity adjustment (S, T-guide rollers adjustment)
Test Point: W3V01 (Envelope)
W3V02 (H'D SW - Trigger)
Test Tape : SR1 -2 (Mono Scope ; 6KHz)
Fig. 9 Location of Test Point (Main PCB)
<§> Setting of Scope ф
- Volt/div.; CH-1 = 0.1 V
CH-2 = 0.2V
CH-2 PROBE
W3V02
H'D S/W PULSE
1. Playback the SRI-2 alignment tape (SP mode).
2. Observe the video envelope signal on an oscilloscope
triggered by the video switching pulse.
3. Make sure the video envelope waveform (in its mini-
mum output) meets the specification shown in Fig. 10.
If it does not, adjust as follows;
CH-1 PROBE
W3V03
CTL PULSE
4 Head ; 15 msec
2 Head ; 0.5 msec
Note:?=;.:;
a=Maximwn output of the video RF envelope.
b=Mihiihum output of the video RF envelope at the
entrance side.
c-.Minimnm output of the video RF envelope at the center
d=Minimum output of the video RF envelope at the exit
side.
Fig. 7 Tracking Preset Adjustment
REMOTE BUTTONS CONTROL PULSE REMOVE
PUSH Tracking — 1
Tracking push" — —
Fig. 8 Control Pulse Adjustment
a bed
c,b,d/a§63%
Fig. 10 Envelope Waveform Adjustment
3-3
4. If the section A in Fig. 11 does not meet the
specification, adjust the S-guide roller up or down.
5. If the section В in Fig. 11 does not meet the
specification, adjust T-guide roller up or down.
6. Slightly loosen the set screw at the lower part of the
S, T-guide rollers with a (Hex Wrench - 0.9mm) so that
the guide roller can be adjusted with reasonable
tightness. (Refer to Fig. 12)
H'D SW
PULSE
SET SCREW
Fig. 11 Adjustment Points
ENVELOPE
Fig- 12
7. Playback the SR 1-2 alignment tape (SP mode).
8. Connect an oscilloscope CH-1 to the W3V01 and CH-2
to the W3V02 on the same PCB for triggering.
9. Turn the guide roller heads with a flat head (^i) screw
driver to obtain flat video RF envelope as shown in
Fig. 13.
10. After the adjustment is completed, tighten the set
screws.
Ideal envelope
Fig. 13 S, Т-Guide Roller Height Adjustments
3-4
3. Check for transitional operation from RPS to play
Check transition from RPS mode to play mode, using
a pre-recorded SP tape, make sure the entrance side of
envelope comes to an appropriate steady state within
3 seconds as shown in Fig. 14.
If the envelope waveform does not reach specified
peak-to-peak amplitude within 3 seconds, adjust
as follows:
1. Make sure there is no gap between the supply roller
lower flange and the tape.
If there is a gap, adjust the supply guide roller again.
2. Change operation mode from the RPS to the play
mode again and make sure entrance side of envelope
rises within 3 seconds.
5. Tape wrinkle check
1. Run the E-240 tape in the playback, FPS, RPS and
the pause mode and then observe tape wrinkle at each
guide.
2. If excessive tape wrinkle is observed in the mode shown
below, perform the associated adjustment shown below,
a. Playback mode
- Tape wrinkle at the S, T-guide roller section : Linearity
adjustment
- Tape wrinkle at tape guide flange: A/C head assembly
coarse adjustment
ENTRANCE SIDE
ENVELOPE
Fig. 14 Video envelope rising when operation mode
changes from RPS to play mode.
4. Envelope check
1. Make recordings on E-120 and E-180 tapes, and make
sure the playback output envelope meets the
specification as shown in Fig. 15.
2. Playback a self recorded tape (recording made on this
unit), (with a E-120) the video envelope should meet the
specification as shown in Fig. 15.
In SP mode, (A) should be same as (B).
If the head gap is wide, upper cylinder should be
checked.
Fig. 15 Envelope Output and Output Level Difference
3-5
3-2. REEL TORQUE
3-2-1. Reel Torque
1. The rotation of the capstan motor operates the clutch
ass'y through the belt capstan motor.
2. Brake operation and shift operation in FF/REW are done
by a slide lever.
3. Transportation of accurate driving force is done by
gears, (clutch ass’y)
MODE TORQUE g/cm GAUGE
PB/REC 100 ± 30 Cassette Torquement
RPS 170 ± 30 Cassette Torquement
FF/REW Minimum 600 Torque Gauge
Note : If the spec is out of above chart, replace the clutch
I.;:;?- « ass'y andthen recheck.':
0----0.5
SPRING
TENSION
MAGNETIC
F/E HEAD
FULL TENSION -
ARM ASSEMBLY
CAM TENSION
ADJUST
TENSION BAND
REEL DISK L
Fig. 16 Tension Pole and Back Tension Adjustment
BACK TENSION METER
3-2-2. Location of Tension Pole and Back Tension
Adjustment
1. Remove the housing ass’y and set the deck to play mode.
2. Adjust the cam tension to 0-0.5mm from the center
of supply roller.
3. The back tension meter should be used for checking
back tension.
Check back tension, should be 40 - 47g.cm.
If not. adjust cam tension.
Counterclockwise: Torque UP
Clockwise : Torque DOWN
Fig. 17 Back Tension Tape Torque Cassette
3-6
Electrical adjustments are required after replacing circuit
components and certain mechanical parts.
It is important to perform these adjustment only after all
repairs and replacements have been completed. Also, do
not attempt these adjustments unless the proper equipment
is available.
4-1-1. Required Test Equipment
1. Color Television or Monitor.
2. Oscilloscope: wide-band, dual-trace,
triggered delayed sweep.
3. Trackingscope.
4. AC Voltmeter.
5. Recording tape. (Blank tape)
6. Alignment tapes : SR 1-2, SR2-2, SR2-3
Fig. 2 Color bar signal of pattern generator
Tapes Video Signal Audio Signal
SR1-2 (PAL) Mono Scope 6 KHz
SR2-2 (PAL) Color Bars 1 KHz
SR2-3 (SECAM) Color Bars 1 KHz
Fig. Alignment Tape
(Color Bar Signal)
The 75% color bar signal recorded on the alignment tape is
shown in Fig. 3.
Color bar pattern
4-2. PROGRAM SWITCH TIMING CHART
POSITION
I 1 I I I I i i
SW A till —1— I f I 1 1 I I I I I I I I I I I 1 I I
1 I I I 1 I I 1 1 I i I I I I I
SW В I -1— I I I i f 1 1 I 1 I I I i I 1 1 I I 1 I 1
SW c I 1 I I 1 I I 1 1 1 I 1 I I I I 1 1 1 —! —I 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SW D 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 EJECT UNLOAD R- PS R. SLOW STILL PB STOP FF/REW
MODE (OPERATION CONDITION) SWITCH POSITION IC606
В c D
EJECT EJECT H H H L |
UNLOAD UNLOAD L H L L
R. PS R. PS Г I L L H
R- SLOW R.SLOW H H
STILL STILL H L H H
PLAY. FPS. REC PB H H L L
STOP STOP H H L H
FF/REW FF/REW H H L L
4-2
4-3. SERVO, AUDIO & TUNER SECTION
STEP I ADJUSTMENT ITEM
I. MODE and INPUT SIG-
NAL/ALIGNMENT TAPE
г TEST POINT and ADI. part
3. RESULT & REMARKS
1 | SWITCHINC POINT
1. ТВ", Alignment tape SR2-2
1W3V02 (Mam PCB),
ADJ. put
A/C HEAD PCB
TP43O1 -4pm (I/O PCB) &
VR201 (Main PCB)
3. * Connect in oscilloscope's CH-1 to
W3V02 for triggering and CH-2 to
TP430I - 4 pm.
• Adjust VR20I so that the switching
point is positioned 6.5 ± 05 H
from the V-SYNC left edge as
shown.
2 | AUDIO BIAS LEVEL |
1 .’REC’fSP mode), no signal input
2. TP1 (A/C Head) & VR50! (Main PCB)
3. • Cornea AC voltmeter probes to TP! on the A/C Head PCB.
• Adjust VR50! so that the reading on the AC voltmeter becomes
2 5mVrms.
* Composition for RF AGC Adjustment
pal COLOR PAL PATTERN BAR SIGNAL ОЛ GENERATOR
TV CH GENERATOR 2 CH (48.25 BIHz) I 70dBu ATTENUATOR
VCR ANT W TP401 -J DC VOLTMETER
3 I RFAGC |
I. "E-E (stopmode), RF signal
2. TP40! (Mam PCB) & VR40! (IF-PACK)
3. • Apply PAL color bar signal to the video input lermmal of the TV
channel generator and sei channel selector to CH 2 (48.25 MHz).
* Adjust the рал signal level so that the output of attenuator u
70dBn.
• Apply the output of attenuator to the ANT IN terminal of VCR.
• Set the channel of VCR to CH 2.
• Cornea DC voltmeter to TP40!.
• Adjust VR401 for DC 4.2 ± 0.1V.
4-3
4-4. SECAM SECTION
STEP | ADJUSTMENT ITEM
I I. MODE md INPUT SIG-
, NAUALIGNMENT TAPE
2. TEST POINT md ADJ. pirl
3. RESULT & REMARKS
1 | REC A ATI BELL ]
1. 'REC", SECA.M color bar signal
(LINE or AV)
2. W3S01 (Main PCB)&.
FL3S02 (Maui PCB)
3. Connect an oscilloscope CH-1 to
W3S0I.
• Adjust FLS3O2 so that the CH 1
and CH2 of the magenta color
level are same
ADJ, part
4 [ VIDEO SYNC TIMING
1. *PB", Alignment tape SR2-3
2. TP4301 - 4 pan (Mam PCB) Л
VR3S01 (Main PCB)
3. • Connect an oscilloscope CH-1 to
TP4301-4pe.
• Adjust VR3S01 so that the noise
gate pulse pocoon is
U ± 0.1> see from the H-SYNC
signal
2 | PB ANTI-BELL |
1. *PB‘. Alignment tape SR2-3
2. TTM3O1 - 4 pin (Main PCB) Л.
FL3SO4 (Mam PCB)
3. * Connect an oscilloscope CH-1 to
ТМЗОМри.
* Adjust FL3SO4 so that the magenta
cf color in 100% white level do
not make a "Doubting Picture'.
4-4
MAIN PCB
(Bad)
(Good)
5. ELECTRICAL PARTS LIST
5-1. GENERAL INFORMATION
1. Parts Replacement
Many electrical and mechanical parts in Video Cassette
Recorder (Player) have special safety-related charac-
teristics. These characteristics are often not evident from
visual inspe tion, nor can the protection they give
necessarily be obtained by replacing them with compo-
nents rated for higher voltage, wattage, etc.
Replacement parts which have these special safety
characteristics are identified in this manual; electrical
components having such features are identified by Д
in the replacement parts lists and schematic diagrams.
The use of a replacement part which does not have the
same safety characteristics as the factory recommended
replacement parts shown in this service manual may
create shock, fire or other hazards.
3. ASS’Y = Assembly
Mark : Safety related parts.
S. How to order replacement parts
To have your order filed promptly and correctly, please
furnish the following informations.
1) Model Number
2) Location Number
3) Part Number
4) Description & Specification
2. Unless otherwise specified :
1) AH resistors are in ohms ( Q )
- К = 1.000
- M = 1.000K
* RD : 1/4W, ± 5% Carbon
• RM : 1/8W, ± 5% Metal-film
2) All capacitors are in ± 10%, MF = iS.
* CC : PF = uuF, Ceramic, Temp
* СК : PK = uuF, Ceramic, MK
* CS: Tantalium
* CQ : Polyester
* CE: Electrolytic
3) All coils are in microhenry (uH)
- ImH = l.OOOuH
5-1
5-2. ELECTRICAL REPLACEMENT PARTS LIST
IfLOCANC > РАЯТ-MJUeER DESCRiPTlO^SPECffTCATlON ; ] |
1
|б60 69098-220-500 REGULATOR ASSY;X-3 tOO -240'.' CP2 1 1
1 63053-811-221 POWER CORD ASSY;KLCE-2F CP-2 11
BOlOl B4104-0060 DIODE-RECT;0F06M 720V i A STICK BRIDGE 11
ClOi Bl 102-0100 C-FILM;KN8 1530 0.22UF/AC250V M
Cl 02 61419-001-001 C—FILM;KNBlS30 0.1UF/AC250V IB
СЮЗ Al100-0450 C-CEHAMIC.CK45B 400V 222M 12/SC E 2G 222M M
Cl 04 Al100-0450 C-CERAMIC;CK458 400V 222M 12/SC E 2G 222M
Cl 05 61659-611-101 C-ELECTROL YTIC; CE04W10Ou F/4C0V 1
СЮ6 61419-001-004 C-POLYESTER;6TM2JRB 473K 630V 1
СЮ7 Al 100-0660 C-CERAMIC;CC 45 SL 1KV T 101-K OBECFK 1
Cl 06 61507-121-511 C-POLYESTER;CQ921M TAPG 100V 223-J
СЮ9 61637-5U-470 C-ELEC.CEAP 100V 47M SG(l0Xl2.5) M
C110 Al104-0364 C-ELECCE 04 C 25V Ю1-М 1
Cl 11 Al 100-0450 C-CERAMIC;CK45B 400V 222M 12/SC E 2G 222M
C112 Al100-0450 C-CERAMIC.CK458 400V 222M 12/SC E 2G 222M
C113 Al104-0365 C-ELEC.CE 04 C 50V 331-M
C114 Al104-0289 C-ELEC.CE04C 10V 2200M STXi 0X20(105C)
Cl 15 61637-505-331 C-ELEC.CEAP 25V 330M SG(1OX12.5)
Ci 16 Al 104-0290 C-ELEC.CE04C 25V 1000M STXi0X20(105C)
Cl 17 61637-505-331 C-ELECCEAP 25V 330M SG(l0Xl2.5)
Cl 16 61637-508-470 C-ELEC.CEAP 50V47M SG(6.3Xl 1)
Cl 19 61637-511-100 C-ELECCEAP 100V ЮМ SG(6.3Xl1)
C120 61637-504-101 C-ELEC.CEAP 16V 1C0M SG(6.3Xll)
Ci 21 61507-121-480 C-POLYESTEftCQ92lM TAPG 100V 153-K
C122 Al 104-0366 C-ELEC.CE 04 В 250V 2R2-M
Cl23 А1Ю0-0450 C-CERAMIC.CK458 400V 222M 12/SC E 2G 222M
Cl 24 A1100-0450 C-CERAMIC;CK458 400V 222M 12/SC E 2G 222M
CN101 A6010-0407 CONNECTOR-WAFER;28-5085-009-000 BLK 1
DiOl B4102-0006 DlODE-FR;EGOlC(3.3)V 500MA (O.i)US 1
Di03 B4102-0029 DIODE-FR;EU02W *00V IA 0.4US T 1
0104 B4102-0029 DlODE-FR;EU02W 400V 1A 0.4US T I
D10S B4102-0033 DIODE-FR;UF4007 1000V :A 75NS T 1
Oioe B4102-0029 DIODE-FR;EU02W 400V iA 0.4US T "
D107 B4102-0005 DlODE-FR;FMP-Gl2S<l 15)V 5A(O.15>US ’
0106 B4102-0039 DIODE-FRERC90G-02YMG 200V 5A 35NS T 1
D109 1 B4102-0029 DIODE-FR;EU02W 400V 1 A0.4US T | U
Olio | 1 B4102-0029 DIODE-FR;EU02W400V 1A 0.4US T 1
Dili 1 B4102-0029 D10DE-FR.EU02W 400V IA 0.4US T 1
FiOi 1 64709-085-040 FUSE.T1.6A2S0V21B SX20UM LT EUR 1
F102 j 1 64709-085-140 FUSE.T2A 250V 2IB LF 1
iClOl | 1 B4010-0015 IC-HYBRID;STR11006 SMPS SIP 1
«Ci 02 1 1 62119-401-313 IC;PQi2RFii 1
LlOl J 1 64529-420-230 LINE FILTER;SHL 030 1
Li02 В 1 Al 130-0017 COIL-CHOCK;20UH MP 1
L103 Ц 1 64529-630-010 FILTER CHOKE;8PI
OlOl H 1 A4056-0019 TR-SWTTCHING;2SD12O7T 1W150MHZ SI/NPN T 1
RiOi Ц 1 АЮ14-0011 R-CEMENT;RWC 2 R 2R7-K 1
RW2 В 1 Al006-0458 R-METAL FILM;RM 1/4 T 7S3-J 1
R103 M 1 A1004-0196 R-METAL OXlDE.'RS 1/2 T(S) 154-J R
Гякм"^И 1 81004-0198 R-METAL OXIDE;RS 2W 33K-J/ERG2SJ333E I
R105 В 1 61049-427-330 R-METAL OXIDE;RS IN 33-J Я
R106 В 1 81004-0304 R-METAL OXIDE;RS 2 T 33O-J/ERG2SJ330E I
R107 H 1 Al014-0014 R-CEMENT.RMC 2 R(S) R47-K 1
Rioe В 1 61048-277-102 R-METAL FILM;RM 1/4T 1K-J 1
R109 В 1 61048-277-102 R-METAL FILM RM 1/4T IK^J 1
R110 И 1 Al006-0550 R-METAL FILM:RM 1/4 T SRl^J 1
Rill 1 A1006-0457 R-METAL FILM, RM 1/4 T ’20-J 1
R112 M 1 A1006-0458 R-METAL FILM RM 1/4 T 753-J 1
R113 1 61048-277-152 R-METAL FILM;RM V4T i.5K^J
R114 В 1 81004-0193 R-METAL OXIDE.RS 2W 33K^J/ERG2SJ333E II
R115 К 1 81004-0304 R-METAL OXIDE.RS 2 T 330-J/ERG2SJ330E Д
Riis И 1 61048-177-103 R-METAL FILM RM 1/8TS lOK-J Л
ТЮ1 И 1 Al206-0003 TRANS-SWITCHING.P(100-240V) S(6.5-38) VDE IN
iZDiOlB 162169-423-096 DlODE-ZENER;MTZ 220 |
|LOCA.NO PART-NUMBER ОЕ8СЯУТЮК.ВРЕОРЮДТ10Н
69099-825-706 VK-350 В 169099-625-707 VK-320 BIBLB
ct°i IK| СТ02 стоз CT04 HU CTOS CT06 CT07 DT01 DT03 ЮТ01 ГТ01 ГГ02 LCToiBII QTOi OT02 MH RTOt RT02 Bl RT03 ВИ RT04 B| XT01 XT02 Br 64043-0051 -00 DOOR BATTERY RE*; ABS94HB T2.0 BLK NR2559 64043-0055-00 DOOR-HlDDEbCABS94HB Tl .5 BLK 61453-131-330 C-CERAMlC.CHIP;0805 5A 33OJAT MA 61453-131-220 C-CERAMlC.CHIP;0805 5A 220JAT MA 61453-130-301 C-CERAMIC.CHlP;0805 5A 300JAT MA 61453-130-301 C-CERAMIC.CHIP;0805 5A 300JAT MA 61637-806-229 C-ELEC.CEAP 35V 2.2M SE(3X5) 61647-702-470 C-ELEC CEAP 6.3V 47M SS(2.5) 61453-130-104 C-CERAMIC.CHIP;0805 SE 104ZAT MA 62169-406-482 DIODE; 1N4148 SAMSUNG 62169-406-482 DIODE, 1N4148 SAMSUNG 67199-0142-00 MICOU;KS56C820-59 VF-370 QFP 62309-112-041 LED-IR;GL538 62309-112-041 LED-IR.GL538 A4155-0023 LCD; LE-D10-004A VF-370 62129-301-123 TRANSISTOR.CHIP;2SC2412 62129-301-123 TRANSISTOR.CHIP;2SC 2412 61079-917-334 R-MG.CHIP.RMC 1/10 330K-J 61079-917-333 R-MG.CHIP;RMC 1/10 33K^J 61079-917-751 R-MG CHIP.RMC 1/10 750^1 61079-917-339 R-MG.CHIP.RMC 1/10 3.3^J 64539-021-010 CRYSTAL; P-3(32.768KHZ) A12BO-OC56 CRYSTALS 4256MHZ HC-49/U-A 30PPM
ASSY REMOCON.NR2559 (W/O LCD) I
П1И11В 69099-625-209 VK-330
69099-625-206 VK-320/APS. MAR
69099-625-213 VK-300
64043-0051-00 64043-0050-00
CTi | j| 61637-802-479
CT2 МИ 61407-101-360
CT3 M||| 61407-101-360
DTi Ш|| 62309-112-041
DT2 ВИ 62309-112-041
'СТО A4002-0064
OTi 62137-702-020
ми 61048-177-109
НГ2 ДИ 61048-177-564
XTi 64539-102-311
DOOR BATTERY RE’;ABS94HB T2.0 BLK NR2559
DOOR-HIDDEN; ABS94HBT1.5 BLK NR2559
C-ELEC.CEAP 6.3V 4.7M SE(3X5)
C-CERAMIC. TEMP;CC45 SL TAPG 50V 100-J
C-CERAMIC.TEMP;CC45 SL TAPG 50V 1OO-J
LED-IRGL538
LED-IR.GL538
IC-MCU;KS51800-05 VCR SOP
TRANS 1ST OR; KSC 1008-YTAPG
R-METAL FILM;RM 1/6TS 1^1
R-METAL FILM RM 1/8TS 560K^J
CERAMIC RESONATOR;CSB455EBL/KBR455BKTL
15-2
[LOCALNO PART-NUMBER: Т^СЯ1РТЮН.8РЕС1Р1СА-6Н 1 Iloca.no PART-NUMBER DESCRiPTtONiSPEdFlCATlON |
69371-302-234 ASSY f/TIMER.X-3 PAL (VK-350) TH
69371-302-232 ASSY F/TIMERX-3 PAL (VK-320) J SW701 63599-016-070 SW-TACTEVG-QS2 05K
SW702 63599-016-070 SW-TACTEVQ-CS2 05K
63054—316—150 FFC CABLE BNCD-1 25-K-16P-150M/M ^^g SW703 63599-016-070 SW-TACT EVQ-CS2 05K
63054-327-130 FFC CABLE BNCD-1 25-К-27Р-1Э0М/М SW704 63599-016-070 SW-TACT EVQ-QS2 05K
C701 TO 61617-404-470 C-ELEC; CEAP 16V 47M RSS(6.3X7) |fi| SW705 63599-016-070 SVY-TACT;EVQ-aS2 OSK
C703 H[ 61407-101-320 C-CERAMIC TEMP.CC45SLTAPG 50V82^T"^H SW706 63599-016-070 SW-TACT EVQ-GS2 OSK
C704 gfi Al 100-0561 C-CERAMIC.CK OA Y 50V T 2200-N SW707 63599-016-070 SW-TACT. EVQ-QS2 05K
C706 ЕД 61617-404-100 C-ELEC.CEAP 16V ЮМ RSS(4X7) IHl SW708 63599-016-070 SW-TACTEVQ-QS2 OSK
C707 fig 61617-405-479 C-ELEC.CEAP 25V 4.7M RSS(4X7) 1|| 1 SW709 63599-016-070 SW-TACT ;EVQ-QS2 05K
C709 fig 61617-404-470 C-ELEC.CEAP 16V 47M RSS(6.3X7) SW711 63599-016-070 SW-TACT.EVQ-QS2 05K
CN701 K|g B6010-0359 CONNECTOR-WAFER HLEM-27R-1 BLK SW712 63599-016-070 SW-TACT;EVQ-QS2 05K
CN702 HI B6010-0361 CONNECTOR-WAFER.HLEM-16R-1 BLK |^fi SW713 63599-016-070 SW-TACT; EVO-QS2 05K
0703 fig 62169-406—482 DIODE, 1N4148 SAMSUNG iBl SW714 63599-016-070 SW-TACT; EVO-QS2 05K
0706 gfi 62169-406-482 DIODE, i N4148 SAM SUNG ^H SW715 63599-016-070 SW-TACT.EVO-QS2 05K
□707 I |g" 62169-406-482 DIODE, 1N4148 SAMSUNG Hfl SW716 63599-016-070 SW-TACT; EVQ-QS2 OSK
□710 62169-406-482 DIODE. 1N4148 SAMSUNG Щ SW719 63599-016-070 SW-TACT.EVQ-QS2 05K
0712 fig 62169-406-482 DIODE, 1N4148 SAMSUNG 1|B| SW720 63599-016-070 SW-TACT;EVQ-QS2 05K
0714 fig 62169-102-057 DIODE-SHOTTKY:iSSl08TA JIB 1 SW721 63599-016-070 SW-TACT;EVO-QS2 05K
□715 Eg 62169-102-057 DIODE-SHOTTKY;iSS!08TA Itf] SW722 63599-016-070 SW-TACT;EVQ-QS2 05K
0716 Eg 62169-406-482 DIODE; 1N4148 SAMSUNG 1 1 SW723 63599-016-070 SW-TACT;EVQ-QS2 05K
□717 И? 62169-406-482 DIODE; 1N4148 SAMSUNG Ш 1 SW725 63519-102-072 SW-SLIOE.KSA 2240A/T00220003-2
D7ia IQ 62169-406-482 DIODE; i N4146 SAMSUNG ДЦ SW726 63519-102-071 SW-SLIDE KSA 2340АГГ0023002-3
0719 Hi 62169-406-482 DlODE;i N4148 SAMSUNG SW727 63519-102-072 SW-SLIOE.KSA 2240АГГ00220003-2
0720 gfi 62169-406-482 DIODE; 1N4148 SAMSUNG 1 |Л VR70I 81052-0001 VR-ROTARY BLOCK.RK16Y12S 100KBX1
0721 Egg 62169-406-482 DIODE. iN4 148 SAMSUNG JHg ZD701 62169-423-092 DIODE-ZENERMTZ 6.8B/UZ 6.8BH
0722 П 62169-406-482 DIODE; 1N4148 SAMSUNG ill ZD702 A4106-0065 DIODE-ZENERUZP-27BH 27V 30MAT(iW)
0723 Ей 62169-406-482 DIODE;iN4148 SAMSUNG Ill
0724 fig 62169-406-482 DIODE; 1N4148 SAMSUNG
□725 fig 62169-406-482 DIODE; 1N4148 SAMSUNG
0726 |H 62169-406-482 DIODE; i N4148 SAMSUNG ЦМ 69371-302-233 ASSY F/TIMER;X-3 PAL (VK-330) И». _
0727 H| 62169-406-482 DIODE.1N4148 SAMSUNG 69371-302-231 ASSY F/TIMER X-3 PAL (VK-300)
0728 EE 62189-406-482 DIODE; 1 N4i 48 SAMSUNG
FL701 fig A4153-0018 V F DISPLAY; SW-9ME01 63054-327-130 FFC CABL E. BNCD -1 25-K-27P-130M/M
JA701 El A3040-0004 JACK PlN;DSP-8805-03(YEL) 63054-316-150 FFC CABLE.BNCD-i 25-K-16P-1SOM/M
JA702 ЕЛ A3040-0003 JACK PIN;DSP-8805-03(WHT) ЦЯ C701 |^|j 61617-404-470 C-ELEC CEAP 16V 47U RSS<6 3X7) !
LD704 fig 62309-110-340 LED;GL-3H07/GL3HD8 Wl C703 BE 61407-101-320 C-CERAMIC TEMP CC45 SL TAPG 50V 82-J
LO705 fig 62309-110-340 LED:GL-3HD7/GL3HD8 g 1 C704 BE Al 100-0561 C-CERAMIC;CK OA Y 50V T 2200-N [
R70_ 61048-177-473 R-METAL FlLM;RM 1/8TS 47K^J C706 gS 61617-404-100 C-ELEC CEAP 16V 10M RSS(4X7)
R704 fife 61048-177-221 R-METAL FILMRM 1/8TS 220-J ^H C707 Hl 61617-405-479 C-ELEC;CEAP 25V 4 7U RSS(4X7)
R705 Eli 81048-177-221 R-METAL FILM:RM V8TS 220-J l^fi C709 gjg 61617-404-470 C-ELEC;CEAP 16V 47M RSS(6 3X7)
R706 ДМ 61048-177-221 R-METAL FILM.RM IWTS 220^1 |H CN701 HI B6010-0359 CONN ECTOR-WAF ER HLEM-27R-1 BLK
R707 НК 61048-177-472 R-METAL FILM:RM 1/8TS 4.7K^J ]|П CN702 Hi B6010-0361 CONN ECTOR-WAFER; HLEM-16R-1 BLK
R710 ИМ 61048-177-472 R-METAL FILM:RM 1/3TS 4 7K^J 1Ц □703 BE 62169-406-482 DK)D€ iN4 148 SAMSUNG
R711 ЕИ 61048-277-101 R-METAL FILM;RM 1/4T ioO^I 11Д ^707 H| 62169-406-482 DWDE;1N4148 SAMSUNG
R712 EM 61048-177-683 R-METAL FILM.RM V8TS 68K^J ВI □710 |H 62169-406-482 DIODE. 1N4148 SAM SUNG
R713 Eiij 81048-177-683 R-METAL FILM:RM V8TS 68K-J Ш1 D712 П 62169-406-482 DIODE: 1N4148 SAMSUNG
R714 fiHif 81048-177-683 R-METAL FILM;RM 1/8TS 68K-J □714 Щ 62169-102-057 DIODE-SHOTTKY; 1 SSi 08T A
r?is EM 61048-177-683 R-METAL FILM;RM 1/8TS 68K-J ||Ц D715 Щ 62169-102-057 DIODE-SHOTTKY; 1 SSi 08T A
R7I6 EM 61048-177-683 R-METAL FILM;RM 1/BTS 68K^J ||Д □717 Kg 62169-406-482 DIODE. 1N4148 SAMSUNG
R717 EBB 61048-177-683 R-METAL FILM;RM V8TS68K-J ||H 0716 HI 62169-406-482 DIODE; 1N4148 SAMSUNG
R718 HIM 61048-177-683 R-METAL FILMzRM 1/8TS 68K^l 111 □719 Efi 62169-406-482 DIODE. 1N4148 SAMSUNG
R719 ЕИ 61048-177-683 R-METAL FILM; RM 1/8TS68K^l 0721 gfi 62169-406-482 DIODE; 1N4148 SAM SUNG
R72C glU 61048-177-683 R-METAL FILM RM 1/8TS 68K^| ill 0722 gfi 62169-406-482 DIODE. 1N4148 SAMSUNG
R721 EM 61048-177-683 R-METAL ALM.RM 1/8TS 68K=J 1 ! 0723 H| 62169-406-482 DIODE. 1N4148 SAMSUNG !
R722 EMI 61048-177-683 R-METAL FILM RM 1/8TS 68K-J Ш1 D724 J 62169-406-482 DIODE;'N4148 SAMSUNG
R723 61048-177-683 R-METAL FILM.RM 1/BTS S8K-J 4Ы 0725 HI 62169-406-482 DIODE; 1N414 SAMSUNG
R724 ЕИ 61048-177-683 R-METAL FILM RM 1/8TS 68K-J №[ □726 H 62169-406-482 DIODE.iN4148 SAMSUNG
R725 Ей! 61048-177-683 R-METAL FILM1RM 1/BTS SBK-J ]№| D727 Hi 62169-406-482 DIODE;’N4148 SAMSUNG
R726 ЕИ 61046-177-683 R-METAL FILM RM 1/8TS 68K-J ill 0728 gE 62169-406-482 DIODE;' N4148 SAMSUNG
R727 EM 61048-177-683 R-METAL FILM RM 1/8TS 68K-J 1Ы FL701 gE A4153-0018 V.F. DISPLAY SW-9ME01
R728 ШИ 61048-177-683 R-METAL FILM RM '/8TS 68K-J VI JA701 H A3040-0004 JACK P1N;DSP-8805-034YEL)
R729 ЕЮ 61048-177-683 R-METAL FILMzRM 1/8TS 68K-J 1 g| JA702 H A3040-C003 JACK PIN DSP-8805-03(WHT) ;
R730 Elil 61048-177—683 R-METAL FILM.RM VBTS 68K-J 1 LD704 H 62309-110-340 LED;GL-3HD7/GL3HD8
R731 BBS 61048-177—683 R-METAL FILM RM 1 /STS 68K-J ^gl LD705 H] 62309-110-340 LED;GL-3HD7/GL3HD8
R732 EM 61048-177-224 R-METAL FILM.RM 1/BTS 220K^J «1 R701 gE 61048-177-473 R-METAL FILM;RM 1/8TS 47K-J
R734 EM 61048-177-750 R-METAL FILM;RM i/BTS 75-J 1П R704 gfi 61048-177-221 R-METAL FILM RM 1/8TS 220-J
R735 EM 61048-177-153 R-METAL FILM.RM i/BTS 15K-J ijjl R705 gfi 61048-177-221 R-METAL FILM.RM 1/8TS 220-J 1
R736 ESI 51048-177-153 R-METAL FILM;RM i/BTS 15K-J II J R707 fig 61048-177-472 R-METAL FILM RM 1/8TS4 7K^l
R737 Ho 61048-277-101 R-METAL FILM:RM «MT 100-J Wl R710 gfi 61048-177-472 R-METAL FILM1RM 1/8TS 4.7K-J
R738 ЕИ 61048-177-102 R-METAL FILMlRM 1/BTS IK^I 1 1 R711 gfi 61048-277-101 R-METAL FILM RM 1/4T 100-J
R739 Еет 61048-177-102 R-METAL FILM.RM I/8TS IK^J Bl R712 gfi 61048-177-683 R-METAL FILM RM 1/6TS 68K^J
R740 gaJJ A1006-0550 R-METAL FILM;RM 1/4 T 5R1-J R713 lt^ 61048-177-683 R-METAL FILM;RM 1/8TS68K-J ‘
5-3
Jloca.no PART-NUMBER DESCRIPTKHSPECifiCATlON -gagi ! |
R714 61048-177-«AS A-METAL FILM RM 1ЛТ81
R715 61048-177-683 R-METAL FILM;RM 1/8TS68K-J
R716 61048-177-683 R-METAL FILM:RM 1/8TS 68K-J
R717 61048-177-683 R-METAL FILM.RM 1/BTS 68K-J
R7i8 61048-177-683 R-METAL FlLMiRM 1/8TS 68K^J
R719 61048-177-683 R-METAL FlLMiRM 1/BTS 68K-J
R720 61048-177-683 R-METAL FlLM;RM 1/8TS 68K-J
R721 61048-177-683 R-METAL FlLMiRM 1/8TS 68K-J
R722 61048-177-683 R-METAL FILM;RM 1/BTS 68K-J
R723 61048-177-683 R-METAL FILM;RM 1/8TS68K-J
R724 61048-177-683 R-METAL FlLMiRM 1/8TS 68K-J
R725 61048-177-683 R-METAL FILM: RM 1/8TS 68K-J
R726 61048-177-683 R-METAL FlLMiRM 1/8TS 68K^J
R727 61048-177-683 R-METAL FILM;RM 1/BTS 68K-J
R728 61048-177-683 R-METAL FlLMiRM 1/8TS 68K-J
R729 61048-177-683 R-METAL FILM; RM i /8TS 68K-J
R730 61048-177-683 R-METAL FlLMiRM 1/8TS 68K-J
R731 61048-177-683 R-METAL FlLMiRM 1/8TS68K-J
R732 61048-177-224 R-METAL FILM RM 1/8TS 220K^J
R734 61048-177-750 R-METAL FILM;RM 1/8TS 75-J
R735 61048-177-153 R-METAL FlLMiRM 1/8TS 15K^J
R736 61048-177-153 R-METAL FILM;RM 1/8TS 15K-J
R737 61048-277-Ю1 R-METAL FILM;RM 1/4T 100-J
R738 61048-177-102 R-METAL FILM RM 1/8TS 1K-J
R739 61048-177-102 R-METAL FlLMiRM 1/8TS 1K-J
R740 Al006-0550 R-METAL FILM;RM 1/4T5R1-J
RM 701 64529-312-041 RE MOCON-MODULE. SBX1610-82
SW701 63599-016-070 SW-TACT;EVQ-QS2 05K
SW702 63599-016-070 SW-TACT;£VQ-OS2 05K
SW703 63599-016-070 SW-TACT;EVQ-QS2 05K
SW704 63599-016-070 SW-TACT;EVO-QS2 05K
SW705 63599-016-070 SW-TACT;EVQ-QS2 05K
SW706 63599-016-070 SW-TACT;EVC-CS2 05K
SW707 63599-016-070 SW-TACTiEVQ-QS2 05K
1 SW708 63599-016-070 SW-TACT.EVQ-QS2 05K
SW709 63599-016-070 SW-TACT;EVQ-QS2 05K
I SW711 63599-016-070 SW-TACT;EVQ-OS2 05K
SW712 63599-016-070 SW-TACT;EVC-QS2 05K
SW713 63599-016-070 SW-TACT;EVQ-QS2 05K
SW714 63599-016-070 SW-TACT;EVQ-QS2 05K
SW715 63599-016-070 SW-TACT;EVQ-QS2 05K
1 SW716 63599-016-070 SW-TACT;EVO-OS2 05K
SW719 63599-016-070 SW-TACT;EVQ-QS2 OSK
SW720 63599-016-070 SW-TACT;EVQ-QS2 05K
SW721 63599-016-070 SW-TACT;EVQ-QS2 05K
SW722 63599-016-070 SW-TACT;EVQ-QS2 05K
SW723 63599-016-070 SW-TACT;EVQ-QS2 05K
SW726 63519-073-020 SW-SL!DE;SSS323
SW727 63519-073-021 SW-SLIDE;SSS 322
zdtoi 62169-423-092 DIODE-ZENER;MTZ 6.8B/UZ 6.8BH
ZD702 A4106-0065 DIODE-ZENER;UZP-27BH 27 V 30MAT(l W)
| LOCA.NQ <5 PART-NUM BER ; DESCRIPTION;SPECIFICATION
803
69357-302-252
69357-302-217
69357-302-251
69357-302-276
I69357-302-216
ASSY MAIN:W-PAUME/SECAM B/G D/K
VK-350
VK-330
VK-320
VK-320/APS. МАЯ
VK-300
POWER PARTS
Cl5l 1 61637-505-331 C~ELEC;CEAP 25V ЗЭ0М SG(10X12.5)
052 61617-404-100 C-ELEC.CEAP 16V ЮМ RSS(4X7)
CN151 A6010-0406 CONNECTOR-WAFER; 18-5085-009-000 BLK 1
0151 62169-406—482 DIODE; 1N4148 SAMSUNG
0152 B4104—0048 DIODE-RECT; 1N4002GP 200V 1A
0153 B4104-0046 DIODE-RECT.TN4002GP 200V 1A
Di54 B4104-0046 DIODE-RECT; 1N4002GP 200V 1A
0155 B4104-0048 DIODE-RECT. 1N4002GP 200V 1A
D156 62169-406-482 DIODE: i N4148 SAMSUNG
0157 B4104-0048 DIODE-RECT: 1N4002GP 200V 1A
ois» B4104-0046 DIODE-RECT; 1 tWOOZGP 200V 1A |
Di 60 62169-901-095 DIODE-CHIP: DAN202K (T96)
Di 62 B4104-0046 DIODE-RECT 1N4002GP 200V 1A
0163 B4104-0046 DIODE-RECT; 1N4002GP 200V 1A
Q151 62137-302-441 TRANSISTOR;KSC 2328-Y TAPG
Qi 52 62137-302-441 TRANSISTOR; KSC 2328-Y TAPG |
Ql53 62137-302-441 TRANSISTOR ;KSC 2328-Y TAPG
Qi 54 62147-401-835 TRANSISTORiKSA 928A-Y TAPG
Qi 55 1 62147-101-950 TRANSISTORiKSA 643-Y TAPG
Q158 62137-701-012 TRANSISTORiKSR 1003 TAPG
Qi 57 62147-401-835 TRANSISTORiKSA 928A-Y TAPG
Qi 58 62137-701-012 TRANSlSTORiKSR 1003 TAPG
Q159 62147-101-950 TRANSISTORiKSA 643-Y TAPG
Qi 60 62137-701-012 TRANSlSTORiKSR 1003 TAPG
Q161 62147-101-950 TRANSISTORiKSA 643-Y TAPG
Q162 62137-701-012 TRANSlSTORiKSR 1003 TAPG
Q163 62137-302-441 TRANSISTOR;KSC 2328-Y TAPG
R151 61048-177-561 R-METAL FILM;RM 1/BTS560-J
R152 61048-277-221 R-METAL FlLMiRM 1/4T 220-J
R153 61048-177-Ю2 R-METAL F1LM;RM 1/BTS iK-J
R154 61048-177-561 R-METAL FlLMiRM 1/BTS 560^1
R155 61048-177-102 R-METAL FlLMiRM 1/BTS 1K-J
R158 61048-177-122 R-METAL FlLMiRM 1/BTS 1.2K-J
R157 61048-177-152 R-METAL FlLMiRM 1/8TS 1.5K-J
R159 61048-177-152 R-METAL FlLMiRM 1/8TS 1.5K-J
R160 61048-177-392 R-METAL FlLMiRM 1/BTS 3.9K-J
R161 61048-177-102 R-METAL FlLMiRM 1/BTS 1K-J
R162 61048-277-272 R-METAL FlLMiRM 1/4T 2.7K-J
R163 61079-917-223 R-MG.CHIPiRMC 1/10 22K-J
R166 61048-277-821 R-METAL FILM;RM 1/4T 820-J
ZD151 A4106-0064 DIODE-ZENER;UZ-5.6BCC 5.6V20MAT
ZD152 62169-403-821 DIODE-ZENER; MTZ 5.1В
[ SYSTEM CON 1 HOL PAH! S Hgjy
C601 Al100-0017 C-CERAMIC.CHIP;2O12F 104Z
C602 Al 100-0086 C-CERAMIC.CHlP;20l2C 120J
C603 Al 100-0086 C-CERAMIC.CHlP;20l2C 120J
C604 61637-502-471 C-ELEC;CEAP 6.3V 470M SG(8X11.S)
C605 61453-131-103 C-CERAMIC.CHIP;O8O5 SC 103KAT MA
C606 61617-404-100 C-ELEC;CEAP 16V ЮМ RSS(4X7)
C607 61104-0294 C-ELECiCE 03 E 5.5V T 104F Z SUPER/EECS5R5T104
0608 61453-131-103 C-CERAMIC.CHlP;0805 SC 103KATMA
C811 61617-404-470 C-ELEC;CEAP 16V47M RSS(6.3X7)
C620 A1100-0010 C-CERAMIC.CHIP12012B Ю2К
C621 Al 100-0009 C-CERAMlC.CHlP;20l2C 101J
C540 Al 100-0015 C-CERAMIC.CHIP:2O12B 152K
1 0641 Al 100-0015 C-CERAMIC.CHlP;20l2B 152K
C645 Al100-0017 C-CERAMIC.CHIP:2O12F 104Z
C660 61407-117-104 C-CERAMIC.AXIAL.CAX Y TAPG 16V 0-C1-N
|C661 61407-117-104 C-CERAMIC.AXIAL.CAX Y TAPG 16V0.01-N
|CN6O1 B6010-0360 CONNECTOR-WAFER;HLEM-27S-1 BLK
lcN602 В60Ю-0415 CONNECTOR-WAFERiHLEM 16S-1 BLK
|CN6O3 86010-0256 CONNECTOR WAFER.52556-0790 WHT
|P6O1 62169-406-482 DIODE: 1N4148 SAMSUNG
|LOCAuNO i PART-NUNSER :> D£SCRttn»HSreCiFICA.TIO*l.. > ВДМ | COCA. NO PART-NUMBER jOESCFVPTtO^SPECIFlCATtON = |
D604 B4104-0046 DIODE-RECT; 1N4002GP 200V 1A R681 51048-177-102 R-METAL F]LM;RM 1/8TS 1K-J
IC601 B4002-0186 IC-MCU;HD6433724 A60F QFP R682 61079-917-102 R-MG.CHIP:RMC 1/10 IK^J
IC602 82119-401-300 Ю.КА8301 (N.M) R583 61048-177-102 R-METAL FILM;RM 1/8TS iK-J
IC603 62119-401-186 Ю.КМ93С46 R684 61079-917-102 R-MG.CHIP;RMC 1Л0 iK^J
0604 82119-101-770 IC;TC4094BP/CD4094BCN R685 61079-917-102 R-MG CHIP;RMC 1/Ю iK^J
IC606 82119-103-712 Ю;ТС4021ВР R686 61079-917-102 R-MG.CHIP;RMC l/Ю IK^J
IC607 A4008-0754 Ю;КА7533 R687 61079-917-102 R-MG.CHIP;RMC 1Л0 iK-J
L601 62429-833-101 COIL-PEAKING AXIAL.BAL04ST Ю1К R688 61079-917-102 R-MG.CHIP;RMC 1/10 IK^J
L510 62429-958-628 INDUCTOR FERRITE BEAD;BL02RNi-R62T2 ! R689 81048-177-102 R-METAL FILM;RM 1/8TS IK-J
LD601 62309-112-043 LED IR;GL-45i (SHARP) 1 R691 61079-917-102 R-MG.CHIP;RMC 1/10 1K-J
0601 82137-103-380 TRANSISTORKSA 733-Y TAPG R692 61048-177-102 R-METAL FH.M RM 1/8TS IK^J
0602 82137-701-013 TRANSISTORKSR 1004 TAPG R693 61048-177-102 R-METAL FILM;RM 1/8TS 1K-J
0604 62137-302-740 TRANSISTORKSC 945-Y TAPG SW640 66209-0008-00 SWTTCH-REC;MPU 10105 MMBO5V
0641 62137-302-740 TRANSISTORKSC 945-Y TAPG W652 51048-177-102 R-METAL ALM;RM 1/8TS 1K^J
0643 66219-0010-00 SENSOR-PHOTO TRANSISTOR. PT 493F W655 61048-177-682 R-METAL FILM;RM 1/8TS 6.8K-J
0644 66219-0010-00 SENSOR-PHOTO TRANSISTORPT 493F XT601 B1283-0018 RESONATOR-CERAMIC;8MHZ EFOGC8004T5 3/CN
0645 66419-0001-00 1NTERUPT ER- PHOTO; SG-105LF XT602 64539-021-009 CRYSTALS 768KHZ
0646 66419-0001-00 INTERUPTER-PHOTO:SG-105LF
R601 61079-917-122 R-MGCHIPRMC 1/10 1.2K-J SERVO PARTS
R602 A1020-0315 R-MG.CHIPRMC 1/10 51K-J
R604 61079-917-682 R-UG.CHIP;RMC V10 6 8K-J C201 61507-121-551 C-POLYESTER;CQ92lM TAPG 50V 473-J
R605 61079-917-220 R-MG CHIPjRMC 1/10 22-J C202 61637-204-100 C-ELEC;CEAP 16V ЮМ SA(5X11)
R605 61079-917-102 R-MG.CHIRRMC l/Ю iK^J C203 61453-131-392 C-CERAMlC.CHIP;0805 5C 392KAT MA
R607 61079-917-102 R-MG ChipRMC 1Л0 1K-J C2O4 61453-130-474 C-CERAMIC. CH IP;0805 5C 473MAT 050M
R608 61079-917-102 R-MGCHIRRMC 1/10 1K-J C205 61637-204-220 C-ELEC.CEAP 16V 22M SA
R609 61079-917-472 R-MG CHIP;RMC 1/1O4.7K^J C206 61637-208-010 C-ELEC CEAP 50V IM SA(5Xll)
R611 81079-917-683 R-MG.CHIP.RMC 1/10 68K-J C207 61627-204-479 C-ELEC;CEAP 16V4.7M NP(4X7)
R612 61079-917-511 R-UG.CH1P;RMC 1Л0 S1O-J C208 Al 100-0015 C-CERAMICCHIP; 2012B 152K
R613 61079-917-220 R-MG CHIP. RMC 1/10 22-J C209 61507-121-551 C-POLYESTER;CQ92iM TAPG 50V 473-J
R614 61079-917-472 R-MG. CHIP; RMC 1/10 4.7K-J C210 61453-131-471 C-CERAMIC.CHIP:0805 5A 470JAT MA
R6l8 61079-917-472 R-MG.CHIP.RMC 1/10 4.7K-J C211 61637-204-100 C-ELEC CEAP 16V ЮМ SA(5X11)
R6l9 61079-917-472 R-MGCHIpRMC 1/10 4.7K-J C212 61637-204-100 C-ELEC.CEAP 16V ЮМ SA(5X11)
R620 61079-917-102 R-MG. CHI R RMC 1/10 1K-J C213 61637-204-100 C-€LEC;CEAP 16V ЮМ SA(5X11)
R630 Bl004-0229 R-METAL OXI DE, RS 1R 7.5-JJEHX1SJ7R5E C214 81637-204-100 C-€LEC;CEAP 16V ЮМ SA(5X11)
R631 Bl004-0229 R-METAL OX IDE; RS iR 7.5-JJEHX1SJ7R5E C2i5 61617-404-470 C-ELEC.CEAP 16V 47M RSS(6.3X7)
R632 61079-917-101 R-MG.CHIP;RMC 1/10 100-J C2i6 Al100-0015 C-CERAMIC.CHIP;2012B 152K
R633 81048-177-102 R-METAL FILM;RM 1/8TS IK^J C217 Al 100-0010 С-СЕНАМЮ.СН1Р-.2012В 102K
R634 61079-917-000 R-MG.CHIP.RMC 1/10 000 C218 Al 100-0044 C—CERAM Ю. CH IP; 2012B 223K
R635 61079-917-102 R-MG.CHIP;RMC 1/10 IK^J C219 81627-204-479 C-€LEC;CEAP 16V 4.7M NP(4X7)
R636 61079-917-102 R-MG.CHIRRMC 1/10 1K-J C220 51407-101-440 C-CERAMIC.TEMP;CC45 SL TAPG 50V 220-J
R637 61079-917-561 R-MG.CHIPRMC 1/10 560<J C221 61453-131-271 - C-CERAMIC CHIP;0805 5A 271JAT MA
R638 61079-917-101 R-MG.CHIP RMC 1/10 lOO^J C222 61637-204-470 C-€LEC;CEAP 16V 47M SA(5X11)
R639 61079-917-105 R-MG.CHIP;RMC 1/10 IM^J C223 61637-204—220 C-ELEC;CEAP ”6V 22M SA
R640 61079-917-224 R-MG.CHIPRMC 1/10 220K-J C224 61507-121-341 C-POLYESTER;CQ921M TAPG 50V iO2^J
R641 61079-917-224 R-MG.CHIP.RMC 1/10 220K-J C225 Bl 102-0112 C-ALM CQ298PVT224JJECQV1H224JZ3
R642 61079-917-203 R-MG CHIPjRMC 1/10 20K-J C226 81507-121-341 C-POLYESTER;CQ92lM TAPG 50V ’02-J
R643 51079-917-472 R-MG.CHIP.RMC 1/10 4 7K-J C227 Al 100-0010 C-CERAMIC. CHI P;2O12B 102K
R644 51079-917-472 R-MGCHIRRMC 1/10 4.7K-J C228 61637-204-220 C-ELEC;CEAP 16V 22M SA
R645 61079-917-472 R-MG CHIP.RMC 1/10 4.7K-J C229 61637-204-100 C-ELEC.CEAP 16V 10M SA(5X11)
R646 61079-917-472 R-MG CHIP.RMC 1/10 4.7K-J C230 61637-204-220 C-ELEC.CEAP 16V 22M SA
R648 61079-917-391 R-MG.CHIP.RMC 1/10 39O-J C231 61637-204-220 C-ELEC.CEAP 16V 22M SA
R649 51079-917-274 R-MG.CHIP.RMC I/10 270K-J CM 201 A6010-0092 CONNECTOR-WAFER;00-82B3-0612-00 WHT 6P
R650 51079-917-224 R-MG CHIP.RMC 1/10 220K-J CN202 B6010-0254 CONNECTOR WAFER.52556-0990 WHT
R651 51079-917-391 R-MG CHIP-.RMC 1/10 390-J D201 62169-406-482 DKDDE1N4148 SAMSUNG
R6S2 61079-917-221 R-MG CHIP;RMC 1/10 220-J D202 62169-406-482 DIODE. *N4148 SAMSUNG
R653 61079-917-224 R-MG.CHIP.RMC 1/10 220K-J D203 62169-406-482 ОЮО£;’Н4148 SAMSUNG
R655 81079-917-304 R-MG CHIP:RMC 1/10 30K^> D204 62169-406-482 DIODE;iN4i48 SAMSUNG
R660 81079-917-102 R-MG.CHIP RMC T/10 IK^J D205 62169—406—402 DIODE; ’N4148 SAMSUNG
R661 61079-917-102 R-MG.CMIP;RMC 1/10 1K-J D206 62169-406-402 DIODE 1N4148 SAMSUNG
R662 81079-917-102 R-MG.CHIP.RMC ’/10 1K-J D207 62169-406-482 DJOOE:iN4i48 SAMSUNG
R663 61079-917-102 R-MG.CHIP.RMC VW IK^J D208 62169-403-830 DIOOE-ZENER;MTZ6 2B
R664 61079-917-101 R-MG.CHIPRMC 1/10 100-J D209 62169-403-830 DIOOE-ZENER,MTZ6 2B
R670 81079-917-102 R-MG.CMIP;RMC 1/10 1K-J IC201 A4012-0105 IC-LINEAR;KA832l SIP VTR SERVO
R671 61079-917-102 R-MG.CMIP RMC 1/10 1K-J Q201 62129-101-173 TRANSISTOR CM IP-.KSR 11C4(REEL)
R672 61048-177-102 R-METAL FILM;RM 1/STS 1K-J Q202 62129-101-173 TRANSlSTORCMIPzKSR 11O4(REEL)
R673 61048-177-102 R-METAL FILM;RM 1/8TS 1K-J 0203 52129-301-109 TRANSISTOFLCMIP-KSR 2lO3-{HEEL)
R674 61048-177-102 R-METAL FILM;RM VSTS 'K-J Q204 62129-101-173 TRANSISTOR. CM IP;K SR 11O4(REEL)
R67S 61079-917-102 R-MG.CHIP:RMC 1Л0 IK^J R201 8Ю79-917-102 R-MG.CMIPRMC 1/10 IK-J
R676 61079-917-102 R-MG.CHIP;RMC 1/10 1K-J R203 61079-917-912 R-MGCMIPRMC 1/10 9.1K-J
R677 61079-917-102 R-MG.CHIpRMC i/Ю 1K-J R205 61079-917-822 R-MG.CMIPRMC 1/10 B 2K-J
R678 61048-177-102 R-METAL FILM.RM 1/8TS iK^j R206 81079-917-472 R-MG.CMIP RMC 1/10 4 7X-J
R679 61079-917-102 R-MG CHIP;RMC 1/10 iK-J R207 6Ю79-917-154 R-MG.CHIP.RMC i/Ю 15OK^J
R680 81048-177-102 R-METAL RLM;RM 1/8TS 1K-J R208 61079-917-394 R-MG CMIP RMC 1/10 390K-J
5-5
[LOCAW 4 PART-HUMBER : D£SCRtPTtoH,SPEC«CATK>N ;.$$&&& | |LOCA.HO; ;PART-NUMBER :t)£3CFU₽T^;SPECinCATKMS?;3W*4i:;|
R2O9 А1Л7О-О17_6вЗ R-Mfi Chip Rur inn БйК-J AUDIO PARTS
R210 61079-9V7-393 R-MG.CHIPRMC 1/10 39K^J
R211 61079-917-105 R-MGCHIPRMC 1/10 1M_J C501 61637-206-100 C-ELEC;CEAP 35V ЮМ SA/5X11)
R212 61079-917-334 R-MG.CHIPRMC 1/1O330K-J C502 61637-205-470 C-ELEC;CEAP 25V 47M SA<6X11)
R213 61079-917-103 R-MG.CHIPRMC 1/10 10K.J C503 61637-205-470 C-ELEC;CEAP25V47M SA(6Xl1)
R214 61079-917-102 R-MG.CHIP.RMC 1/10 IK^J C504 61637-208-010 C-ELEC;CEAP 50V 1M SA/5X11)
R215 61079-917-105 R-MG.CHIP;RMC 1/10 1M-J C505 61507-121-481 C-POLTESTER;CQ921M TAPG 50V 153-J
R216 61079-917-105 R-MG.CHIPRMC 1/10 C506 61507-121-551 C-POLYESTERCQ921M TAPG 50V 473-J
R217 61079-917-564 R-MG.CHIPRMC 1/10 560K-J C507 61637-206-100 C-ELEC.CEAP35V 10M SA/5X11)
R218 6Ю79-917-473 R-MG CH4P;RMC t/10 47X^J C508 61507-121-460 C-POLYESTER:CQ921M TAPG 100V 822-K
R219 61079-917-302 R-MG CHIP;RMC 1/10 3K-J CS09 61507-121-451 C-POLYESTER;CQ921M TAPG 100V 682^1
R220 61079-917-561 R-MG.CHIP;RMC 1/10 560-J C510 61507-121-451 C-POLYESTER;CQ921 M TAPG 100V 6B2-J
R222 61079-917-102 R-MG CHIP;RMC 1/10 IK^J C511 61637-206-100 C-ELEC.CEAP 35V ЮМ SA(5Xl 1)
R223 61079-917-202 R-MG CHIP.RMC 1/10 2K-J C512 61637-208-010 C-ELEC;CEAP 50V 1M SA/5X11)
R22* 61079-917-105 R-MG CHIP;RMC 1/10 1M-J C513 61637-208-229 C-ELEC.CEAP 50V 2.2M SA (5X11)
R225 61079-917-103 R-MG CHIP;RMC 1/Ю 10K-J C514 61507-121-471 C-POLYESTER;CQ921M TAPG 50V 103-J
R226 61079-917-431 R-MG CHlP;RMC 1/10 430-J C515 61637-204-330 C-ELEC;CEAP 16V 33M SA(5X11)
R227 61079-917-431 R-MG CHIP;RMC 1/10 430-J C516 61637-208-478 C-ELEC:CEAP 50V 0.47M SA/5X11)
R228 61079-917-474 R-MG CHIP.RMC 1/10 470K-J C517 61507-121-350 C-POLTESTER:CQ921M TAPG 100V 122-K
R229 61079-917-823 R-MG CHIP.RMC 1/10 82K-J C518 61637-208-010 C-ELEC;CEAP 50V iM SA(5Xll)
R230 61079-917-823 R-MG CHIP;RMC 1/10 82K-J C519 61507-121-371 C-POLYESTER;CQ92lM TAPG 50 V 182-J
R231 61079-917-163 R-MG.CHlP;RMC 1/10 18K-J C52C Al 100-0044 C-CERAMIC CHIP;2012B 223K
R232 61079-917-154 R-MGCHIP.RMC 1/10 150K-J CS21 61507-121-471 C-POLYESTER;CQ921M TAPG 50V 103-J
R233 61079-917-243 R-MG CHIP.RMC 1/10 24K-J C522 61507-121-371 C-POLYESTER:CQ921M TAPG 50V 182-J
R234 61079-917-561 R-MG CHIP;RMC 1/10 560-J C524 61507-121-471 C-POLYESTER: CQ921M TAPG 50V 103-J
R235 61079-917-683 R-MG.CHIP:RMC 1/10 68K-J CS25 Bl102-0126 C-FILM.-CQ982P 100V T 682J-40/85 ECQB1682JF3
R236 61079-917-224 R-MG. CHIP; RMC 1/10 220K-J C527 61453-131-221 C-CERAMIC.CHIP.oeO5 5A 221J AT MA
R237 61079-917-103 R-MG,CHIP;RMC 1/10 lOK^J CS28 61637-205-470 C-ELECCEAP 25V 47M SA(6Xi 1)
R238 61079-917-222 R-MGCHIPRMC 1/10 2.2K-J CD1 61617-404-470 C-ELEC-.CEAP 16V 47M RSS(6.3X7)
R239 61079-917-752 R-MG CHIP;RMC 1/10 7.5K-J CD2 B1102-0113 C-RLMXX2298PVT473J/ECQV1473JZ3
R240 61079-917-822 R-MG CHIP;RMC 1/10 8.2K-J CD3 61507-121-471 C-POLYESTER CQ921M TAPG 50 V 103-J
R241 61079-917-912 R-MG CHIP;RMC 1/10 9.lK^J CD4 61507-121-47! C-POLY ESTER. CQ921M TAPG 50 V 103-J
R242 61079-917-433 R-MG.CHIP;RMC 1/10 43K-J CD5 61507-121-431 C-POLYESTER;CQ92lM TAPG S0V472-J
R243 61079-917-153 R-MG.CHIP.RMC 1/10 15K-J CN501 63054-307-160 FLAT WIRE;UL2878 #26-07P 160
R244 61079-917-433 R-MG.CHIP;RMC 1/10 43K-J CN502 B6010-0436 CONNECTOR-WAFERTMC-E02X-A1 BLK STICK
R245 61079-917-334 R-MG.CHIP;RMC 1/10 330К-J IC501 62119-103-685 IC;LA7295
R2<6 61079-917-223 R-MG.CHIP.RMC 1/10 22K-J L501 62427-812-101 COIL-PEAKJNG:EL0606RA IOOuH^I
R247 61079-917-512 R-MG.CHIP.RMC 1/10 S.lK-J L502 62427-813-153 COIL-PEAKING;EL0607RA ISmH^J
R248 61079-917-562 R-MG.CHIP;RMC 1/10 5.6K^J L503 62427-815-153 COIL-PEAKING;EL0607RA l5mH^J
R249 61079-917-682 R-MG CHIPzRMC 1/10 6.8K-J L504 62427-812-101 COIL-PEAKING;EL0606RA IOOuH^J
R271 61079-917-102 R-MG.CHIP:RMC 1/10 1K-J LD01 62429-833-101 COIL-PEAKING AXIAL: BAL04ST 101K
VR201 61246-105-473 VR-SEMI:RHO615C 47KB LD02 62429-014-1 ID COIL BIAS OSC.B02 70KHZ W(TOKO)VX1850
OSC50’ 62429-014-109 COIL BIAS OSC;BOl 70KHZ B(TOKO)VX1850
TUNER PARTS 0501 62137-702-020 TRANSISTORKSC 1008-YTAPG
Q503 62129-101-172 TRANSiSTORCHIP KSC 1623G(REEL)
IMAI A1292-0018 TUNER;TECC0885VA14C 85CH PAL/CCIRVS Q01 62137-702-020 TRANSISTORKSC 1008-Y TAPG
U4A2 62569-002-318 RF-CONVERTER. RM US 73655EB R501 61079-917-103 R-MG.CHIP;RMC 1/10 10K-J
J4A1 63054-401-670 CABLE-COAXIAL ASSY;UL B66 AWG 30 BLK R502 61048-177-203 R-METAL FILM;RM 1/8TS 20K^J
C4A6 A1100-0017 C-CERAMIC.CHIP;2O12F 1042 R503 81079-917-361 R-MG.CHIP;RMC 1/10 360-J
D420 62169-901-095 DIODE-CHIP.DAN202K (T96) R504 61079-917-332 R-MG.CHIP;RMC 1/10 3.3K^J
R4A0 61079-917-335 R-MG CHIP RMC I/103.3MJ R505 61079-917-331 R-MG.CHIP.RMC 1/10 330-J
R4A1 61079-917-103 R-MG CHIP;RMC 1/10 lOK^J R506 61079-917-473 R-MG.CHIP.RMC 1/10 47X-J
R4A2 61079-917-432 R-MG CHIP.RMC 1/10 4.3K-J R507 61048-177-122 R-METAL FILM;RM i/BTS 1.2K-J
R4A3 61079-917-223 R-MG.CHIP-RMC 1/10 22K-J R508 61079-917-223 R-MG.CHIP;RMC 1/10 22K-J
R4A5 61079-917-103 R-MG CHIP RMC 1/Ю 10K-J R509 61079-917-472 R-MG. CHIP: RMC 1/10 4.7K-J
R4A6 61079-917-103 R-MG.CHIP RMC 1/10 10K-J R510 6Ю79-917-475 R-MG.CHIP;RMC 1/10 4.7M-K
FUA7 61079-917-103 R-MG.CHIP:RMC 1/10 lOK^J R511 61048-177-273 R-METAL F1LM:RM i/BTS 27K-J
R4A8 61079-917-103 R-MG.CHIP;RMC 1/10 lOK^I R512 61079-917-392 R-MGCHIP;RMC 1/103.9K^J
R4A9 61079-917-822 R-MG.CHIP RMC 1/10 8.2K-J R513 61079-917-302 R-MG CHIP.RMC 1/10 3K-J
R4B1 61079-917-335 R-MG.CHIP RMC 1/10 3 3M-J R514 61079-917-562 R-MG CHIP;RMC 1/10 5 6K-J
R4B2 61079-917-335 R-MG.CHIP.RMC 1/10 3.3M-J RSIS 61079-917-822 R-MG CHIP;RMC 1/10 8.2K^J
R4B3 61079-917-223 R-MG.CHIP RMC 1/10 22K-J RS 16 61079-917-334 R-MG CH!P;RMC 1/10 33CK-J
R4B4 61079-917-223 R-MG.CHIP RMC i/Ю 22K-J R517 61079-917-101 R-MG CHIP-.RMC 1/10 100-J
C4A1 61637-208-100 C-ELEC.CEAP 50V ЮМ SA/5X11) R518 61079-917-561 R-MG CHIP;RMC 1/10 560-J
C4A2 Bl 102-0125 C-FILM;CQ982P 50V T 104J-40/85 R519 61079-917-152 R-MG CHIP;RMC 1/10 1.5K^J
C4A3 Bl 102-0125 C-FlLM;CQ982P 50V T 104J-40/85 R520 61079-917-473 R-MG CH|P;RMC 1/10 47K-J
С4АД Bl 102-0125 C-FILM:CQ982P 50V T 104J-40/85 R521 61079-917-478 R-MG.CHIP;RMC 1/104.7^1
C4A5 61637-205-470 C-ELEC:CEAP 25V 47M SA/6X11) R522 61079-917-473 R-MGCHlPRMC 1/10 47K-J
C4A8 Bl102-0125 C-FILM;CQ982P 50V T 104J-40/85 R525 61079-917-621 R-MG.CHIP.RMC 1/10 62C-J
IC4A2 62119-501-561 IC-L;KA33VTAPG R527 61079-917-682 R-MG.CHIP;RMC 1/10 6.8K-J
U4A1 62429-833-101 COIL-PEAKING AXIAL.BAL04ST Ю1К RD1 61048-177-479 R-METAL FILM:RM 1/8TS4 7-J
Q4A1 62137-302-740 TRANSISTOR KSC 945-V TAPG RD2 61048-177-223 R-METAL FILMjRM 1/8TS 22K^J
C4A10 61617-404-100 C-ELEC.CEAP i6V ЮМ RSS(4X7) VR501 61246-105-473 VR-SEMI.RH0615C 47KB
62119-401-370 IC;LA7920
5-6
loca.no : ; past-number pescaipriorj.aPEcyicArio^ - t^ -’ j (loca.no paht-numbsr ;Q£3CRiPT>ON;SP£aFiCATtot*
SECAM PARTS R3S22 61079-917-102 R-MG CHIP.RMC 1/10 IK^J
C3S01 6 U53-131-103 C-CERAMIC CHIP;0805 5C ЮЗКАТ MA R3S24 61079-917-222 R-MG CHIP;RMC 1/Ю 2.2K^J
C3S02 Al 100-0009 C-CERAMIC CHIP;20l2C 101J R3S25 61079-917-222 R-MG CHlP-RMC 1/10 2.2K^J
C3S03 61453-131-103 C-CERAMIC. CHlP;0805 5C ЮЗКАТ MA R3S26 61079-917-333 R-MG CHIP;RMC 1/10 3K^J
C3S04 61453-131-103 C-CERAMIC. CH IP;0805 5C ЮЗКАТ MA R3S27 61079-917-682 R-MG CHIP;RMC 1/10 6.8K-J
C3S05 61453-131-103 C-CERAMIC.CHIP:0805 5C ЮЗКАТ MA R3S28 6Ю79-917-473 R-MG CHIP;RMC 1/10 47K^J
C3S06 61637-204-470 C-ELECCEAP 16V 47M SAJ5X11) R3S29 61079-917-272 R-MG CHIPRMC 1/Ю 2.7K^J
C3S07 61453-131-660 C-CERAMIC CHIP:0B05 5A 6«0JAT MA R3S30 6Ю79-917-123 R~MG.CH1P;RMC t/10 12K^J
C3S08 Al100-0009 C-CERAMIC. CHIP2012C 101J R3S31 61079-917-223 R-MG CHIP RMC 1/10 22K^J
C3S09 A1100-0017 C-C£RAMIC.CHIP;2012F 104Z R3S32 6Ю79-917-103 R-MG.CHIP-.RMC 1/10 lOK^J
C3S10 61453-131-103 C-CERA14IC.CHIP 0805 5C ЮЗКАТ MA R3S33 61079-917-102 R-MG.CHIP;RMC 1/10 IK^J
C3S11 61453-131-103 C-CERAMIC. CH IP;0805 5C ЮЗКАТ MA R3S34 61079-917-102 R-MG.CHIP:RMC 1/10 iK^J
C3S12 61507-121-350 C-POLTESTER;C092i M TAPG 10CV 122-K R3S35 61079-917-823 R-MG.CHIP;RMC 1/10 82K^J
C3S13 Al100-0010 C-CERAUICCHIP:20i2B Ю2К R3S36 61079-917-222 R-MG.CHIP;RMC i/Ю 2.2K^J
C3SU Al100-0009 C-CERAMIC.CHIP;Z012C 10U R3S37 61079-917-154 R-MG.CHIP;RMC 1/10 150K^J
C3S15 61453-131-103 C-CERAMIC. CHIP;0805 5C ЮЗКАТ MA R3S38 61079-917-103 R-MG.CHIP RMC 1/Ю lOK^J
CSS 16 61454-144-222 C-CERAMIC.CHIP1206 5C 222KAT MA R3S39 61079-917-471 R-MG.CHIP;RMC 1/Ю 470^J
CSS 17 61453-131-103 C-CERAMIC CHIP 0805 5C ЮЗКАТ MA R3S41 61079-917-00 R-MG CHIP RMC 1/10 000
C3Sl8 61637-204-470 C-ELECCEAP 16V 47M SA(SXi 1) R3S42 61079-917-00 R-MG.CHIP;RMC 1/10 000
CSS 19 61453-131-103 C-CERAMIC.CHIP 0805 5C ЮЗКАТ MA RSS50 61079-917-223 R-MG.CHIP RMC 1/10 22K^J
C3S20 61637-204-470 C-ELECCEAP 16V 47M SA(5X1i) VR3S01 61246-105-223 VR-SEMIRH0615C 22K
C3S21 61453-131-221 C-CERAMIC.CHIP;0805 5A 221JAT MA
C3S22 61637-206-010 C-ELECCEAP 50V 1M SA(5X1 1) LUMA/CHRCMA PARTS
C3S30 Al100-0044 C-CERAMIC.CHIP;20i2B 223K
C3S31 61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA C3V02 61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA
C3S32 61453-131-103 C-CERAMIC СН1РЮ805 5C ЮЗКАТ MA C3V03 61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA
C3S33 61637-204-330 C-ELEC.CEAP 16V 33M SA(SXlt) C3V04 61453-131-471 C-CERAMIC.CHIP;0805 5A 470JAT MA
C3S34 61637-204-330 C-ELECCEAP 16V 33M SA(SXli) C3V05 61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA
C3S35 61637-204-470 C-ELEC; CEAP 16V 47M SAfSXIl) C3V49 61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA
C3S50 Al 100-0008 C-CERAMIC. CHIP:2O12C 100J D3V01 62169-406—482 DIODE; 1N4148 SAMSUNG
C3S90 61453-131-471 C-CERAMIC.CHIP;oe05 SA 470JAT MA FL3V01 64569-006-011 DELAY LINE;MS-3iPC-5K
D3S01 62169-406-482 DlODE;iN4l48 SAMSUNG L3V01 62427-020-150 COIL PEAKING AXIAL; LALO2TB 150J TAPG
FL3S01 Al240-0073 ALTER-LCBP 1.07M 1.07MBPFCBP1 lS-1 L3V02 62427-020-150 COIL PEAK! NG AXIAL. LALO 2TB 150J TAPG
FL3S02 62609-006-030 COIL TUNNING; 1.072 MHZ O3V01 62137-302-740 TRANSISTQRKSC 945-Y TAPG
FL3S03 62429-038-014 FILTER LC« 3 mHZ BPF Q3V02 62129-101-173 TRANSISTOR.CHIP;KSR 1 iO4(REEL)
FL3S04 62809-006-030 COIL TUNNINGЛ .072 MHZ Q3V03 62129-101-172 TRANSISTOR CHlPjKSC 1623G(REEL)
FL3S05 62809-006-020 COIL TUNNING 4.2B MHZ R3N22 61079-917-222 R-MG.CHlP;RMC 1/10 2.2K^J
FL3S06 64529-632-111 FILTER-LC DIP TYPE* 3S R3V01 61079-917-271 R-MG CHIPzRMC 1/10 270-J
FL3S07 64527-310-010 FILTER CERAMICSFE4 5MB TAPG R3V04 61079-917-102 R-MG.CHIP;RMC 1/10 iK^J
FlSSM A1134-0015 COIL-TRAP;?. 6 К HZ 23.5MH 0.016UF R3V05 61079-917-102 R-MG.CHIP RMC 1/10 iK^J
IC3S0I 62119-103-689 IC.BA7107S R3V06 61079-917-102 R-MG CHIP; RMC 1/10 IK^J
IC3S02 A4008-0035 IC;BA7O25L SIP
L3S01 62427-020-221 COIL PEAKING AX1AL.LAL02TB 221J TAPG I/O (MAIN PCB) PARTS
L3S02 62427-020-121 COIL PE AK1N G. AX IALLAL 02TB 121J TAPG
L3S05 62427-020-221 COIL PEAKING AXIAL.LAL02TB 221J TAPG OC01 62169-Ю6-482 DIODE; 1N4148 SAMSUNG
Q3S01 62129-101-173 TRANSISTOR. CHIP;KSR 1l04(REEL) DC02 62169-406-482 DIODE; 1N4148 SAMSUNG
Q3S02 62129-101-130 TRANSISTOR CHIP:KSR 2102 (REEL) DC03 62169-406-482 DIODE; 1N4148 SAMSUNG
Q3S03 62129-101-173 TRANSISTOR.CHIP:KSR 11C4(REEL) RC01 61079-917-104 R-MG.CHIP;RMC 1/10 10OK-J
Q3S04 62129-101-172 TRANSISTOR.CHIPKSC 1623G(REEL) RC02 61079-917-104 R-MGCHIPRMC 1/10 100K-J
Q3S05 62147-101-950 TRANSISTOR: KSA 643-Y TAPG RC03 61079-917-104 R-MGCHIPRMC 1/10 100K-J
QSS06 62137-701-023 TRANSISTORKSR 2004 TAPG
O3S07 62129-101-172 TRANS1STOR.CHIP К SC 1623G(REEL) SYNC DET PARTS (OPTION)
Q3S0S 62129-101-173 TRANSISTOR. CH IP aKSR 1104{REEL)
R3S01 61079-917-102 R-MG.CHIP RMC 1/10 1K-J C3SY1 61617-404-100 C-ELEC CEAP 16V I0M RSS(4X7)
R3S02 61079-917-102 R-MG.CHIPRMC 1710 IK^J C3SY2 61617-O08-478 C-ELEC.CEAP 50V 0.47M RSS(4X7)
R3S03 61079-917-103 R-MG.CHIP RMC 1/10 1CK-J D3SY1 62169-406-482 DIODE; 1N4148 SAMSUNG
R3S04 6 Ю79-917-821 R-MG.CHIP; RMC 1/10W820-J Q3SY1 62137-302-740 TRANSISTOR;KSC 945-YTAPG
R3S05 61079-917-102 R-MG.CHIP;RMC 1/10 iK^J Q3SY2 62137-701-013 TRANSlSTORjKSR 1004 TAPG
R3S06 61079-917-102 R-MG.CHIP RMC 1/Ю IK^J Q3SY3 62137-701-013 TRANSISTORKSR 1004 TAPG
R3S07 61079-917-331 R-MG.CHIP RMC 1/Ю 330^1 O3SY4 62137-701-013 TRANSISTOR.KSR 1004 TAPG
R3S10 6Ю79-917-561 R-MG CHIP RMC 1/10 560 Q3SY5 62137-701-013 TRANSISTOR KSR 1004 TAPG
R3S11 61079-917-122 R-MG.CHlP;RMC 1/10 1.2K-I R3SY1 61079-917-472 R-MG.CHIP;RMC 1/10 4.7K^J
R3S12 61079-917-821 R-MG. CHIP; RMC 1/10W 820^J R3SY2 61079-917-821 R-MG CHIP;RMC 1/10W 820^1
R3S13 61079-917-103 R-MG CHP:RMC l/Ю lOK^J R3SY3 61079-917-470 R-MG.CHIP:RMC 1/Ю 47-J
R3S14 61079-917-222 R-MG CHIP; RMC 1/Ю 2.2K-J R3SY4 61079-917-472 R-MG CHIP:RMC ''/IO 4.7K^J
R3S15 61079-917-331 R-MG CHIP; RMC 1/10 330-J R3SY5 61079-917-472 R-MG.CHIP; RMC 1/10 4.7K-J
R3S16 61079-917-101 R-MG. CHIP1RMC 1/10 100^1 R3SY6 61079-917-472 R-MG.CHIP RMC 1/10 4.7K-J
R3S17 6i079-917-152 R-MG CHIP;RMC i/Ю 1.5K-J R3SY7 61079-917-102 R-MG.CHIP RMC 1/10 IK^J
R3S18 61079-917-333 R-MG CH IP; RMC 1/10 33K-J
R3S19 61079-917-102 R-MG CHIP;RMC 1/10 iK-J
R3S20 61079-917-333 R-MGCHIPRMC 1/10 33K-J
R3S2I 61079-917-393 R-MG CHIP RMC i/10 39K-J
5-7
lLOCA.NO; РДЯТ-NUMBER :Р££СЯ1РТЮН;8РЕСУ1САТЮМ.: :}
|60t 69312-302-235 ASSY PRE-AMP.«H'd (VK-350/VK-330)
8iai§3§888?8g§8g§88gg8g88Sggg2?2?e§888gi§§§8§88g§8S8gg§§gggg|S8§§8g?S8§
61453-131-103 C-CEFUMIC СН1Р^8055С ЮЗКАТ MA
Al 100-0010 C-CERAMIC CHIP-,20128 102K
Al100-0080 C-CERAM1C.CHIP-.2012C 820J
Al 100-0080 C-CERAM1C CHIP-.2012C 820J
Al100-0017 C-CERAMIC.CHIP-.2012F 104Z
Al 100-0017 C-CERAMIC.CHIP;2O12F 104Z
A1100-0017 C-CERAMIC.CH1P;2O12F 104Z
A1100-0017 C-CERAMIC CHIP;2O12F 104Z
Al 100-0017 C-CERAM1C CHIP-2012F 104Z
Al 100-0017 C-CERAMIC. CH IP: 2012F 104Z
61453-131-220 C-CERAMIC CHIP 0805 5A 220JAT MA
61453-131-220 C-CERAMIC CHIP;0805 5A 220JAT MA
Al100-0010 C-CERAMIC. CHIP: 20128 102K
61637-808-010 C-ELEC;CEAP 50V 1M SE(4X5)
61637-808-010 C-ELEC.CEAP 50V IM SE(4X5)
61617-408-010 C-ELEC;CEAP 50V 1M RSS(4X7)
61617-408-010 C-ELEC;CEAP 50V 1M RSS(4X7)
61617-406-010 C-ELEC.CEAP 50V IM RSS(4X7)
61453-130-474 C-CERAM1C.CH1P;O8O5 SC 473MAT 050M
Al 100-0017 C-CERAMIC CHIP.2012F 104Z
61453-131-103 C-CERAMIC.CHIP;0805 5C ЮЗКАТ MA
61453-131-103 C-CERAMIC.CHIP 0805 5C ЮЗКАТ MA
61617-404-101 C-ELEC;CEAP 16V 100M RSS(6 3X7)
61617-404-101 C-ELEC.CEAP 16V Ю0М RSS(6.3X7)
61453-131-103 C-CERAMlC CHIPi0805 5C ЮЗКАТ MA
61617-408-010 C-ELEC;CEAP 50V 1M RSS(4X7)
61453-131-103 C-CERAMIC CH1P;O8O5 5C ЮЗКАТ MA
61453-131-103 C-CERAM1C.CHIP;0805 5C ЮЗКАТ MA
61453-131-221 C-CERAMIC CHIP;0805 5A 221JAT MA
61453-131-100 C-CERAM Ю.СН1Р;08055А 1OOJATD5CM
A1100-0038 C-CERAMIC CHIP:20i2C 151J
61453-131-270 C-CERAMIC CHIP;0805 5A 270JAT MA
61453-131-680 C-CERAMIC CHIP-,0805 5A 680JAT MA
61453-131-471 C-CERAMIC CHIP;0805 5A 470JAT MA
Al 100-0038 C-CERAMIC CHIP;2O12C 151J
A1100-0080 C-CERAMIC CHIP.2012C 820J
61453-131-100 C -CERAMIC. CH IP;06055A100JAT050M
61453-131-180 C-CERAMIC.CHIP;0605 5A 180JAT MA
Al 100-0053 C-CERAMIC CHIP;2O12C 390J
61453-131-181 C-CERAMIC CHIP-.0605 5A 181 JAT MA
Al 100-0038 C-CERAMIC CH IP. 2012C 151J
81453-131-103 C-CERAMIC CHIP.0805 5C ЮЗКАТ MA
Al100-0044 C-CERAMICCHIP20128 223K
A1100-0017 C-CERAMICCHIP2012F 104Z
61453-130-121 C-CERAMIC CHIP 0605 5A 121 JAT MA
Al100-0017 C-CERAMIC CHIP2012F 104Z
61453-131-100 C-CERAMIC.CHIP;08055A1 OOJAT05OM
61453-131-270 C-CERAMIC CHIP 0805 SA 270JAT MA
61453-131-181 C-CERAMIC CHIP 0805 5A 181 JAT MA
61453-131-220 C-CERAMIC CHIP 0805 5A 220JAT MA
61627-208-010 C-ELEC CEAP 50V 1M NP(6Xl 1)
61617-404-100 C-ELEC.CEAP 16V ЮМ RSS(4X7)
61637-206-100 C-ELEC;CEAP 35V 10M SA/5X11)
61637-608-338 C-ELEC.CEAP 50V 0.33M SV(5X9)
Al100-0080 C-CERAM IC.CHlP:20i2C 820J
Al100-0009 C-CERAM IC.CHIP2012C 101J
61453-131-103 C-CERAMIC CHIP;0805 5C ЮЗКАТ MA
61453-131-103 C-CERAMIC. CH IP;0805 5C ЮЗКАТ MA
61637-205-470 C-ELEC;CEAP25V47M SA(6X11)
61617-405-479 C-ELEC.CEAP 25V 4.7M RSS(4X7)
61617-408-010 C-ELEC;CEAP 50V IM RSS(4X7)
61617-408-010 C-ELEC.CEAP 50V iM RSS(4X7)
61453-131-751 C-CERAMIC CHIP-0805 5A 750J AT MA
61617-408-019 C-ELEC.CEAP 50V 0 iM RSS(4X7)
Al 100-0044 C-CERAMIC CH!P;2012B 223K
61617-408-010 C-ELEC.CEAP 50V IM RSS(4X7)
61617-408-0Ю C-ELEC CEAP 50V IM RSS/4X7)
61617-404-Ю1 C-ELEC;CEAP 15V 10ЭМ RSS{6 3X7)
61617-404-100 C-ELEC.CEAP 15V 10M RSS(4X7)
61617-404-100 C-ELEC;CEAP i5V ЮМ RSS(4X7)
61454-139-209 C-CERAMIC CHIP-.0805 5A 2R0CAT MA
11LOCANO PART-NUMBER.: C£3CfllPTK>N;SP£anCATtON:
1 C399 61453-130-121 C-CERAMIC.CHIP;0805 5A 121JAT MA
1 CN301 63348-231-080 CONNECTOR-WAFER52045-0810
1 CN302 A6010-0365 CONNECTOR-WAFERGC200-15PLS WHT
I CN303 A6010-0264 CONNECTOR WAFER GC200-10P-LS WHT
I CN304 A6010-0264 CONNECTOR WAFERGC200-10P-LS WHT
1 D301 62169—406—482 DIODE, 1N4148 SAMSUNG
1 D302 62169-406-482 DIODE, 1N4146 SAMSUNG
1 D303 62169-406-482 DIODE, 1N4148 SAMSUNG
1 D305 62169-406-482 DIODE, 1N4148 SAMSUNG
1 0306 62169-406-482 DIODE 1N4148 SAMSUNG
I IC301 B4012-0044 Ю-LINER BA7277S DIP
I Ю302 A4010-0009 IC-HYBRlD;SVH-350 DIP
l BC303 Б4008-0432 IC;MSM 7403RS SIP
I L301 62427-612-471 COIL-PEAKJNG;EL0606RA 470uH^J
1 L302 62427-020-221 COIL PEAKING. AX IAL; LALO 2TB 221J TAPG
I L303 62427-020-220 COIL PEAKING.AX IAL, LALO 2TB 220J TAPG
1 L304 62427-020-560 COIL PEAKiNOAXlAL,LAL02TB 56CJ TAPG
I L306 62427-812-331 COIL-PEAKJNG:EL0606RA 330uH^J
1 L307 62427-020-220 COIL PEAKING.AXIAL;LAL02TВ 220J TAPG
1 L308 62427-020-330 COIL PEAKING. AXIAL; LAL02TB 330J TAPG
1 L309 62427-020-220 COIL PEAKJNtXAXlAULALOZTB 220J TAPG
1 L310 €2427-020-101 COIL PEAKING.AX IAL. LAL 02TB 101J TAPG
1 L3ii 62427-020-221 COIL PEAKING. AX IAL. LAL 02TB 221J TAPG
1 L312 62427-020-620 COIL PEAKING.AX IAL, LAL02T В 820J TAPG
1 L313 62427-020-221 COIL PEAKING AXIAL.LAL02TB 221J TAPG
1 L314 62427-020-560 COIL PEAKING.AX IAL. LAL 02TB 56OJ TAPG
1 L315 62427-020-680 COIL PEAKING. AXIAL;LAL02TB 680J TAPG
I L316 62429-833-101 COIL-PEAKING AXIAL;BAL04ST 101К
1 L317 62427-020-339 COIL PEAKING AXIAULAL02TB 3R3J TAPG
1 L399 62427-O20-820 COIL PEAKING. AXIAL,LALC2TB 820J TAPG
1 Q301 62129-101-173 TRANS1STORCHIP;KSR 11O4(REEL)
! Q302 62129-101-172 TRANSISTORCHIP; KSC 1623G(AEEL)
1 Q305 62129-101-172 TRANSISTOR CHIP; KSC 1623G(REEL)
1 Q306 62129-101-172 TRAN SISTORCH IP; KSC 1623G(REEL)
I Q307 62129-101-080 TRANSISTORCHIRKSA 812-<3(REEL)
1 Q308 62129-101-173 TRANS1STORCHIP;KSR 11O4(REEL)
1 0309 62129-101-080 TRANSISTORCHIRKSA 8l2-G(REEL)
1 03 Ю 62129-101-173 TRAN SI STOR CHIP; KSR11O4(REEL)
I 0311 62129-Ю1-1Э0 TRANSISTORCHIP;KSR 2102 (REEL)
I 0312 62129-101-173 TRANSJSTORCHIP-.KSR 1104(REEL)
1 0313 62129-101-173 TRANSISTORCHIP-.KSR 1104(REEL)
I 0314 62129-101-173 TRANSlSTORCHIPjKSR 1104(REEL)
1 0315 62129-101-173 TRANS ISTORCHIP;KSR 1104(REEL)
1 0317 62129-101-130 TRANSISTORCHIPiKSR 2102 (REEL)
1 0318 62129-101-172 TRANSISTOR CH IP^CSC 1623G(REEL)
f 0322 62129-Ю1-172 TRANSISTOR CH IP^SC 1623G(REEL)
1 0323 62129-Ю1-060 TRANSISTOR. CH IPJtSA 812-G(REEL)
1 0330 62129-101-173 TRANSlSTORCHIPjKSR 1104(REEL)
I 0331 62129-Ю1-130 TRANSISTORCHIP;KSR 2102 (REEL)
1 R301 61079-917-102 R-MG.CHIP:RMC 1/10 iK^J
1 FOO 2 61079-917-471 R-MG CHIP.RMC 1/1O470-J
1 R303 61079-917-471 R-MGCHIRRMC 1/10 470-J
S FO04 61079-917-121 R-MG.CHIP;RMC 1/10 120^J
1 R305 61079-917-121 R-MGCHlRRMC 1/10 120-J
1 R306 61079-917-102 R-MG.CHIP;RMC l/Ю tK^J
1 R3O7 61079-917-511 R-MG.CHIRRMC 1/10 510-J
1 R308 61079-917-511 R-MGCHIPRMC 1/10 510-J
1 R309 61079-917-101 R-MG.CHtP;RMC 1/10 tOO^J
1 R310 61079-917-181 R-MGCHIPRMC 1/10 180-J
1 R311 61079-917-392 R-MG.CHIPRMC 1/10 3 9K-J
1 R312 6Ю79-917-152 R-MG.CHIPRMC 1/10 1.5K-J
1 R313 61079-917-102 R-MGCHIPRMC 1/10 1K-J
1 R314 61079-917-273 R-MG CHIP RMC 1/10 27K-J
1 R315 61079-917-123 R-MG.CHIPRMC 1/10 12K-J
1 R316 61079-917-181 R-MG.CHIPRMC 1/Ю 180-J
1 R317 61079-917-102 R-MG CHIP RMC 1/10 IK^J
I R318 61079-917-W2 R-MG.CHIP RMC 1/10 IK^J
1 R319 61079-917-222 R-MG.CHIPRMC 1/lO2.2K^J
1 Й320 61079-917-471 R-MG.CHIPRMC 1/10 470—J
I R321 6Ю79-917-471 R-MG CHIP RMC 1/10 470^J
I R322 6Ю79-917-182 R-MG.CHIP.RMC 1/10 1.8K-J
1 R323 61079-917-000 R-MG.CHIPRMC 1/10 000
| R324 61079-917-471 R-MG.CHIPRMC 1/10 470—J
5-8
[loca.no PAftT-NWUSER j D£SCftPTm3PECtEICAT«teiWiS W4
R325 81079-917-751 R-MG CHIP;RMC 1Л0 750-J
R326 6Ю79-917-471 R-MG.CHIP;RMC IMO 470-J
R327 6Ю79-917-102 R-MG CHIP-.RMC 1/10 IK^J
R328 61079-917-102 R-MG CHIP-RMC 1/10 iK^J
R329 61079-917-271 R-MGCHIP;RMC 1/10 270-J
R330 61079-917-102 R-MGCHIPRMC 1/10 IK^J
R331 6Ю79-917-661 R-MG.CHIP;RMC 1/10 680^
R332 61079-917-271 R-MG.CHIRRMC 1/10 270-J
R333 61079-917-122 R-MG CHIP RMC 1/10 12K-J
R334 61079-917-333 R-MG CHIPRMC 1/10 33K
R335 61079-917-333 R-MG CHIP;RMC 1/10 33K^J
R336 61079-917-152 R-MG.CHIPRMC 1/10 1.5K-J
R337 61079-917-152 R-MG.CHIP RMC 1/10 1.5K-J
R338 61079-917-102 R-MG.CHIPRMC 1/10 IK^J
R339 61079-917-102 R-MG CH1PRMC 1/10 iK^J
R340 61079-917-122 R-MG.CHIPRMC 1/10 1 2K^J
R341 61079-917-392 R-MG.CHIPzRMC i/Ю 3.9K-J
R342 61079-917-472 R-MG.CH!P;RMC 1/10 4 7X^J
R343 61079-917-662 R-MG.CHIP.RMC 1/10 6.8K-J
R344 61079-917-122 R-MG.CHIPRMC 1/10 12K-J
R345 61079-917-222 R-MG.CHIPRMC 1/10 2.2K-J
R34« 61079-917-102 R-MG.CHIPRMC 1/10 1K-J
R347 61079-917-102 R-MG CHIP RMC 1/10 1K-J
R348 81079-917-271 R-MG.CHIPRMC 1/10 270^J
R349 61046-177-182 R-METAL FILM;RM 1/BTS 1.8K-J
R35C 61043-177-333 R-METAL FILM;RM 1/8TS33K^J
R352 61079-917-103 R-MG CHIP RMC 1/10 lOK^I
R353 61079-917-822 R-MG.CHIP;RMC 1/10 8.2K^J
R354 61079-917-153 R-MG.CHIP.RMC 1/10 15K-J
R356 61079-917-471 R-MG CHIP RMC 1/10 470-J
R396 61043-177-102 R-METAL FILM;RM 1/8TS IK^J
R399 61079-917-183 R-MGCHiPRMC 1/Ю 18K-J
XT301 64539-012-079 X-TAL:4.43 3619MHZ 8PPM TAPG
♦♦**♦♦**♦**♦♦**♦♦**♦♦♦*♦**♦♦♦♦♦♦♦*
|60l 69312-302-209 ASSY PRE AMP;2H'd (VX-320/VK-300)
C3O2 Al 100-0010 C-CERAMIC CHIP2012B 102K
C303 Al100-0080 C-CERAM»C.CHIP;20l2C 820J
C304 A1100-0080 C-CERAMICCHIP2012C 820J
C305 A1100—0017 C-CERAMIC CH IP: 2012F 104Z
C3O6 Al100-0017 C-CERAMIC CHIP 2012F 104Z
C309 Al100-0017 C-CERAMICCHIP2012F 1042
C311 61453-131-220 C-CERAMIC CHIP 0805 5A 220JAT MA
CGI 2 61453-131-220 C-CERAMIC. CHIP;0805 5A 220JAT MA
C313 61079-917-000 R-MGCHIP.RMC 1/10 000
C314 61637-808—010 C-ELEC.CEAP 50V iM SE(4X5)
C315 61637-808-010 C-ELEC.CEAP 50V iM SE(4X5)
C316 61617-408-010 C-ELEC CEAP 50V 1M RSS(4X7)
CGI 7 61617-408-010 C-ELEC;CEAP 50V iM RSS(4X7)
CG1B 61617-408-010 C-ELEC.CEAP 50V iM RSS(4X7)
CG19 61453-130-474 С-СЕНАМЮСН1Р0805 SC 473MAT 050M
C320 A1100-0017 C-CERAM>C.CHIP;20l2F 1042
C321 61453-131-103 C-CERAMIC.CHIP;0805 5C 1C3KAT MA
C322 61453-131-103 C-CERAMIC. CH IP:0805 5C ЮЗКАТ MA
C323 61617-404-101 C-ELEC.CEAP i6V 100M RSS(6.3X7)
C324 61617-404-101 C-ELECCEAP 16V 100M RSS(6.3X7)
C325 61453-131-103 C-CERAMICCHIP-Q805 5C 1O3KAT MA
C326 61617-408-010 C-ELEC;CEAP 50V i M RSS(4X7}
C327 61453-131-103 C-CERAMIC CHIP;0B05 5C 103KAT MA
C32B 61453-131-103 C-CERAMIC СН1р0805 5C 103KAT MA
0329 61453-131-221 C-CERAMIC-CmPiOBOS 5A 221JAT MA
C330 81*53-131-100 C-CERAMЮ CHIP;08055A 100JAT050M
C331 Al 100-0038 C-CERAMIC.CHIP2012C I5i J
0332 61453-131-270 C-CERAMICCHIP;0e05 SA 270JAT MA
0333 61453-131-680 C-CERAMIC CHlPiOJOS SA bsojat ma
0336 61453-131-471 C-CERAMIC СН1Р;0в05 SA 470JAT MA
C337 Al 100-0038 C-CERAMlC. CHIP2012C 15:J
0338 Ai 10С-0080 C-CERAMIC CHIP;2O12C 820J
C339 61*53-131-100 C-CERAMIC.CHIPzOBOSSAIOOJATOSOM
C340 61453-131-180 C-CERAMIC.CHIPzOBOS SA 160JAT MA
C341 Al 100-0053 C-CERAMIC CHIP2012C 39OJ
ILOCALNO;. ^PARW«jMe£Rj DESOWTlOftSPgaRCA'nCW : ;
C342 61453-131-181 C-CERAMIC CHIP.0805 5A 181 JAT MA
C344 Al 100-0038 C-CERAMIC.CH1P2C12C 151J
C345 61453-131-103 C-CERAMlC CHtP:0«05 5C 1O3KAT MA
C346 Al 100-0044 C-CERAMIC.CHIP2012B 223K
C347 A1100-0017 C-CERAMIC. CHIP2012F 104Z
C348 61453-130-121 C-CERAMIC.CHIP0805 5A 121 JAT MA
C349 AllOO—0017 C-CERAMICCHlP:2012F 104Z
C350 61453-131-100 C-CERAMIC CHIPD8055A10OJAT05OM
C353 61453-131-161 C-CERAMIC CHIP 0805 5A 181 JAT MA
C354 61453-131-220 C-CERAMIC.CHIP:O8O5 5A 220JAT MA
C355 61627-208-010 C-ELEC.CEAP 50V IM NP(6Xl 1)
C358 61617-404-100 C-ELEC CEAP 18V ЮМ RSS(4X7)
C359 61637-206-100 C-ELEC.CEAP3SV ЮМ SA/5X11)
C360 61637-608-338 C-ELEC.CEAP 50V0.33M SV(5X9)
C361 Al 100-0080 C-CERAMIC CHIP 2012C 820J
C362 Al100-0009 C-CERAMICCHIP2012C 1O1J
C363 61453-131-103 C-CERAMIC.CHIP;0805 5C 103KAT MA
C364 61453-131-103 C-CEFUMIC.CHIP;0805 5C ЮЗКАТ MA
C365 81637-205—470 C-ELEC.CEAP 25V 47M SA(6Xl 1)
C366 61617-405-479 C-ELEC;CEAP 25V 4.7M RSS(4X7)
C367 61617-408-010 C-ELEQCEAP 50V iM RSS(4X7)
C368 61617-408-010 C-ELEC;CEAP 50V IM RSS(4X7)
C369 61453-131-751 C-CERAMIC.CHIP 0805 5A 750JAT MA
C370 61617-408-019 C-ELEC;CEAP 50V 0.1 M RSS(4X7)
C372 61617-408-010 C-ELEC.CEAP 50V IM RSS(4X7)
C373 81617-408-010 C-ELEC.CEAP 50V iM RSS(4X7)
C37* 61617-404-101 C-ELEC;CEAP 18V 100M RSS(6.3X7)
C376 61617-404-100 C-ELEC;CEAP 18V WM RSS(4X7)
C379 61617-404-100 C-ELEC;CEAP 18V 10M RSS(4X7)
C398 61454-139-209 C-CERAMIC. CH IP;0805 5A 2R0CAT MA
C399 61453-130-121 C-CERAMIC.CHIP;0805 5A 121 JAT MA
CN301 63343-231-040 CON NECTOR-WAFER;52045-0410
CN302 А60Ю-ОЭ65 CONN ECTOB-WAFER.GC200-15PLS WHT
CN303 A6010-0264 CONNECTOR WAFER;GC200-10P-LS WHT
CN304 A6010-0264 CONNECTOR WAFER;GC200-10P-LS WHT
D301 62169-406-482 DIODEJN4148 SAMSUNG
D302 62169-^106-482 DIODE. 1N4148 SAMSUNG
D3C3 62169-406-482 DIODE. 1N4143 SAMSUNG
D305 62169-406-482 DIODE. 1N4148 SAMSUNG
D308 62169-406-482 DIODE; 1N4148 SAMSUNG
IC301 B4012-0044 IC-LINER;BA7277S OlP
IC302 A4010-0009 IC-HYBRID SVH-350 DIP
1СЭ03 B40C8-0432 IC;MSM 7403RS SIP
L301 62427-812-471 COIL-PEAKING. EL0606RA 470uH^J
L302 62427-020-221 COIL PEAKING.AXIAL;LAL02TB 221J TAPG
L303 62427-020-220 COIL PEAKING.AXIAL;LAL02TB 220J TAPG
L304 62427-020-560 COIL PEAKING.AXIAL.LAL02TB 560J TAPG
L306 62427-812-331 COIL-PEAKING.EL0606RA 330uH^J
L307 62427-020-220 COIL PEAKING.AXIAL;LAL02TB 220J TAPG
L30B 62427-020-330 COIL PEAKING.AXIAL LAL02TB 330J TAPG
L309 62427-020-220 COIL PEAKING.AXIAL; LAL02TB 220J TAPG
L310 62427-020-101 COIL PEAKJNGJ4XIAL;LAL02TB 1O1J TAPG
L311 62427-020-221 COIL PEAKING.AXIAL: LALO2TB 221J TAPG
L312 62427-020-820 COIL PEAKING.AXIAL; LAL02TB B20J TAPG
L313 62427-020-221 COIL PEAKING.AXIAL;LALO2TB 221J TAPG
L314 62427-020-560 COIL PEAK1NG.AXIAL:LALO2TB 560J TAPG
L315 62427-020-680 COIL PEAKJNGAXIAL.LAL02TB 680J TAPG
L316 62429-833-101 COIL-PEAKING AXIAL; BAL04ST 101K
L317 62427-020-339 COIL PEAKJNG.AXIAL.LAL02TB 3R3J TAPG
L399 62427-020-820 COIL PEAKJNGAXIAL.LALD2TB 820J TAPG
0302 62129-101-172 TRANSISTOR CHIP:KSC 1623G(REEL)
0305 62129-101-172 TRANSISTOR CHIP;KSC 1623G(REEL)
0306 62129-101-172 TRANSISTOR CHIP;KSC l623G(REEL)
0307 62129-Ю1-080 TRANSISTOR CHIP:KSA 8l2-G(REEL)
0309 62129-101-080 TRANSISTOR. CHIP;KSA 812-G(REEL)
0311 62129-Ю1-130 TRANSISTOR. CHIP;KSR 2102 (REEL)
0314 62129-101-173 TRANSISTOR CHIP;KSR 11O4(REEL)
0317 62129-101-130 TRANSISTOR. CHPzKSn 2102 (REEL)
0318 62129-Ю1-172 TRANSISTOR. CHPzKSC 1623G(REEL)
0319 62129-101-173 TRANSISTOR. CHIPlKSR H04(REEL)
□320 62129-101-130 TRANSISTOR CH IP:KSR 2Ю2 (REEL)
0322 62129-Ю1-172 TRANSISTOR CH IP :KSC l623G(REEL)
Q323 62129-101-080 TRANSISTORCHIP-KSA 812-G(REEL)
5-9
[LOCA.NO PART-NUMBER . D£SCaPTION.SPEClflCATION 8 i >: ij j [LOCA.NO PART-NUMBER OE3CfttPTK>N;SP£aАСАТЮЫ i ; < • |
R301 61079-917-102 R-MG.CHIP.RMC 1/10 IK^J C916 61617-408-010 C-ELEC.CEAP SOV IM RSS(4X7)
R302 61079-917-471 R-MG.CHIP; RMC 1/W470-J C917 61617-40»—4 7» C-ELEC.CEAP 50V 0.47M RSS(4X7)
R303 61079-917-471 R-MG.CHIP;RMC 1/10 470-J C918 Al 102-0148 C-FILM.CF 922 P 100VT 104-J /С-М 365
R304 61079-917-121 R-MG.CHIP.RMC 1/10 120-J C919 61617-404-101 C-ELEC.CEAP 16V 100M RSS(6.3X7)
R305 61079-917-121 R-MG.CHIP; RMC 1/10 120^1 C920 61453-130-034 C-CERAMIC.CHIP-.0805 SC 103JAT MA
R307 61079-917-511 R-MGCHIP.RMC 1/10510-J 0921 61627-204-479 C-ELEC;CEAP 16V4.7M NP(4X7)
R308 61079-917-511 R-MG.CHIP;RMC 1/10510-J
R309 61079-917-101 R-MG.CHIP;RMC 1/10 100^J
R310 61079-917-181 R-MG.CHIP;RMC 1/10 180-J
R311 61079-917-392 R-MG.CHIP;RMC 1/103.9K-J 0927 Al 100-0044 C-CERAMlC.CHIP;2012В 223K
R312 61079-917-152 R-MG.CHIP;RMC 1/Ю 1.5K-J 0928 Al 100-0044 C-CERAMIC.CHIP;2012В 223K
R314 61079-917-273 R-MG.CHIP;RMC U10 27K-J 0929 61637-204-100 C-ELEC;CEAP 16V 10M SA(5Xl 1)
R315 61079-917-123 R-MG.CH1P;RMC 1/10 12K-J CN901 A6010-0363 CONNECTOFUWAFER;GC200-12P LS WHT
R316 61079-917-181 R-MG.CHIP;RMC 1/10 180-J D9C1 62169-406-482 DIODE; 1N4148 SAMSUNG
R317 61079-917-102 R-MG.CHIP.RMC 1/10 1K-J D902 62169-406-482 DIODE; 1N4148 SAMSUNG
— D903 62169-406-482 OlODE;lN414B SAMSUNG
0904 62169-406-482 DlODE;lN414S SAMSUNG
D905 62169-406-482 DIODE;lN41«e SAMSUNG
D906 62169-406-482 DlOOE;tN41«e SAMSUNG
D9C7 62169-406-482 DIOOE.1N4148 SAMSUNG
IC901 A4008-0995 IC.KS5513C DIP
L901 62427-020-330 COIL PEAKI NG .AXIAL. LAL02TB 330J TAPG
L9O2 62427-020-150 COIL PEAKING JU0AL.LAL02TB 1S0J TAPG
L903 62427-020-120 COIL PEAKING JUOAULALOZTB 120J TAPG
R327 61079-017-102 R-MG.CHIP; RMC 1/10 1K-J L904 62427-812-100 CO<L-PEAKJNG;EL0606RA lOuH^J
R328 61079-917-102 R-MG CHIP.RMC 1/10 1K-J L905 62429-833-101 COIL-PEAKING AXIAL;BAL04SF 101K
R329 61079-917-271 R-MG.CHIP.RMC 1/10 270-J L906 62427-812-101 COIL-PEAK1NG;EL0606RA IOOuH^J
R330 61079-917-102 R-MG CHIP;RMC 1/10 IK^J 0901 62137-302-740 TRANSISTOR;KSC 945-Y TAPG
R331 61079-917-821 R-MG. CHIP; RMC 1/10W 820^1 0902 62137-103-380 TRANSISTOR;KSA 733-Y TAPG
R332 61079-917-271 R-MG.CHIP;RMC 1/10 270-J 0903 62137-302-740 TRANSISTOR;KSC 94S-YTAPG
R334 61079-917-333 R-MG.CH1P;RMC 1/1C 33K^J 0904 62137-302-740 TRANSISTOR;KSC 945-YTAPG
R335 61079-917-333 R-MG.CHIP;RMC 1/10 33K-J 0905 62137-302-740 TRANSISTOR; KSC 945-Y TAPG
R336 61079-917-152 R-MG.CHIP;RMC l/Ю 1.5K-J R90i 61079-917-122 R-MG.CHIP;RMC 1/10 1.2K-J
R337 61079-917-152 R-MG.CHIP;RMC 1/10 1.5K-J R902 61079-917-821 R-MG CHIP;RMC 1/10W 820^1
R333 61079-917-102 R-MG.CHIP;RMC 1/10 1K^J R903 61079-917-681 R-MG.CHIP;RMC 1/10 680^1
R339 61079-917-911 R-MG CHIP.RMC 1/10 910^J R904 61079-917-682 R-MG.CHIP;RMC 1/10 6.8K-J
R341 61079-917-392 R-MG CHIP;RMC 1/10 39K^J R905 61079-917-123 R-MG CHIP;RMC 1/10 12K^J
R342 61079-917-472 R-MG.CHIP;RMC i/Ю 4.7K-J R906 61079-917-153 R-MG.CHIP;RMC 1/10 1SK-J
R343 61079-917-682 R-MG.CHIP;RMC l/Ю 6.8K-J R907 61079-917-123 R-MG.CHIP;RMC 1/10 12K^J
R344 61079-917-122 R-MG.CHIP;RMC 1/10 1.2K-J R909 61079-917-681 R-MG.CHlP;RMC 1/10 680-J
R345 61079-917-222 R-MG.CHIP;RMC 1/10 2.2K^J R9W 61079-917-273 R-MG.CHIP.RMC 1/10 27K^J
R345 61079-917-102 R-MG.CHlP;RMC 1/10 1K-J R911 61079-917-622 R-MG.CHIP;RMC 1/10 6.2K^J
R347 61079-917-102 R-MG.CHIP;RMC 1/10 iK^J R912 61079-917-105 R-MG.CHIPRMC 1/10 1M-J
R348 61079-917-271 R-MG.CHIP;RMC U10 270-J R913 61079-917-222 R-MG.CHIP; RMC 1/10 2-2K^J
R349 61048-177-182 R-METAL FILM; RM 1/8TS 1.8K^J R914 61079-917-ЮЗ R-MG.CHIP; RMC 1/10 10K-J
R350 61048-177-333 R-METAL RLM;RM 1/8TS 33K^J R915 61079-917-224 R-MG.CHIP;RMC 1/10 220K-J
R352 61079-917-103 R-MG.CHIP; RMC 1/10 lOK^J R9I6 61079-917-101 R-MG.CHIP.RMC 1/10 100-J
R353 6Ю79-917-В22 R-MG.CHIP;RMC 1/108.2K-J R9l7 61079-917-183 R-MG.CHIP;RMC 1/10 18K^J
R3S4 61079-917-153 R-MG.CH1P;RMC V10 15K-J R91B 61079-917-103 R-MG.CHIP;RMC 1/10 10K-J
R3S6 61079-917-471 R-MG.CHIP;RMC l/Ю 470^1 R919 61079-917-102 R-MG.CHIP:RMC i/W 1K-J
R396 61048-177-102 R-METAL FILM;RM 1/8TS iK^J R921 61079-917-203 R-MG CHIP;RMC 1/10 20K-J
R399 61079-917-183 R-MG.CHlP.RMC 1/10 18K-J R922 61079-917-393 R-MG.CHIP;RMC 1/10 39K^J
XT301 64539-012-079 X-TAL;4.43 3619MHZ 8PPM TAPG R923 61079-917-102 R-MG. CH IP; RMC 1/10 1K-J
R924 61079-917-102 R-MG.CHIP; RMC 1/10 1K-J
R925 61079-917-563 R-MG CHIP;RMC 1/10 56K^J
R926 61079-917-104 R-MG.CHIP.RMC 1/10 lOOK^J
602 69353-302-201 ASSY OSP;X-3 W-PAL (OPTION) R927 61079-917-102 R-MG.CHIP;RMC 1/10 IK^J
R933 61079-917-222 R-MG.CHIP;RMC 1/10 2.2K-J
C901 61617-404-470 C-ELEC;CEAP 16V47M ASS(6 3X7) R936 81079-917-103 R-MG.CH|P;RMC 1/10 10K-J
C902 Al 100-0044 C-CERAMIC CH1P2012B 223K R937 61079-917-473 R-MG.CHIP;RMC 1/10 47K^J
C903 61453-131-270 C-CERAMIC CHIP;08C5 5A 273JAT MA R947 61079-917-680 R-MG.CHIP;RMC 1/10 68-J
C904 81453-131-220 C-CERAMlC.CHlP^805 5A 220JAT MA R948 61079-917-105 R—MG.CHIP;RMC 1/10 iM-J
C905 61453-130-034 C-CERAMIC С HIP;0805 5C 103JAT MA R951 61079-917-104 R-MG.CHIP;RMC 1/10 100K-J
C906 6KS3-I30-034 C-CERAMIC.CHIP-.0805 5C 103JAT MA R953 61079-917-332 R-MG CHIP;RMC 1/10 3.3K-J
C907 61617-408-229 C-ElEC;CEAP 50V2.2M RSS(4X7) XT 901 64539-012-543 CRYSTAL; 17 734475M(20ppm)
C908 61617-404-101 C-ELEC;CEAP 16V lOOM RSS(6.3X7)
0909 61507-121-341 C-POLYESTER;CQ921M TAPG 50V 1O2^J
0910 61507-121-420 C-POLYESTER.CQ921M TAPG 100V392-K
C911 61453-130-121 C-CERAMIC.CHIP^8O5 5A 121JAT MA
0912 61617-408-010 C-ELEC;CEAP 50V iM RSS(4X7)
0913 81453-131-471 C-CERAMIC CHIP^8O5 5A <70JAT MA
C914 Al100-0004 C-CERAMIC.CHIP;2O12C 56OJ
0915 61453-131-821 C-CERAMIC CHIPtfMS 5A 820JAT MA
5-10
[loca.no PART-NUMBER DESCRIPTION. SPECIFICATION
'есз 69326-302-203 ASSY l/O;X-3 W-PAL
C4301 61617-405-179 C-ELEC.CEAP 25V 4.7M RSS(4X7)
C4302 61617-405-479 C-ELECCEAP 25V 4 7M RSS(4X7)
C4303 61407-105-320 C-CERAMIC. ТЕ MPCC45 CH TAPG 50V 82-J
C4304 61617-404-470 C-ELECCEAP 16V 47M RSS46.3X7)
C4305 61407-117-228 C-CERAMIC AX1AL.CK OA F 25V 223Z/F 25V 203ZT
C4306 61617-404-100 C-ELECCEAP 16V 10 M RSS(4X7)
C4307 61617-404-100 C-ELEC.CEAP 16V 10M RSS(4X7)
C4308 61617-404-470 C-ELEC.CEAP 16V 47M RSSI6 3X7)
C4309 61407-117-228 C-CERAMIC.AXIAL.CK OA F 25V 223Z/F 25V 203ZT
С43Ю 61617-404-100 C-ELECCEAP 16V ЮМ RSS(4X7)
C4311 61407-105-320 C-CERAMIC TEMP.CC45 CH TAPG 50V 82-J
C4313 61407-117-102 C-CERAMIC. AXIAL;CAX В TAPG 102-K
C4315 61407-117-102 C-CERAMIC.AXIAL;CAX В TAPG 102-K
C4316 61407-105-320 C-CERAMtC.TEMP.CC45 CH TAPG 50V 82-J
C4317 61407-105-320 C-CERAMIC.ТЕMRCC45 CH TAPG 50V 82-J
C4318 61407-Ю5-320 C-CERAMIC.TEMP;CC45 CH TAPG 50V 82-J
0320 61407-117-102 C-CERAMIC.AXIAL.CAX В TAPG 102-K
0321 61637-502-471 C-ELEC;CEAP 6.3V 470M SG(8Xl 1.5>
0322 61637-602-471 C-ELECCEAP 6-3V 470M SV(iOX9)
0323 61617-404-101 C-ELECCEAP 16V lOOM RSS(6.3X7)
0324 61407-105-320 C-CERAMtC TEMP;CC45 CH TAPG 50V 82-J
0326 61407-117-223 C-CERAMIC.AXIALCAX В TAPG 50V 220-K
0327 61617-404-100 C-ELECCEAP 16V юМ RSS(4X7)
0328 61407-101-460 C-CERAMICTEMP:CC45 SL TAPG 50V 270-J
0330 61637-205-470 C-ELECCEAP 25V 47M SA(6X11)
CN4301 А60Ю-0365 CONNECTOR-WAP ERGC200-15PLS WHT
CN4302 A6010-0365 CONNECTOR-WAFER:GC20G-15PLS WHT
04301 62169-406-482 DIODE; 1N4148 SAMSUNG
10301 62119-401-310 IC, KA8403
10302 62119-401-ЗЮ ICKAB403
JO301 A3040-0054 JACK-SCART;DSR-9102(S) BLK 21P
JO302 A3040-0004 JACK PIN; DS P-8805-03(YEL)
J0303 A3040-0003 JACK PIN;DSP-88C5-03(WHT)
L4301 62427-612-Ю1 COIL-PEAKING;EL0606RA lOOuH^J
L4302 62427-812-101 COIL-PEAKING;EL060BRA lOOuH-j
L4309 62427-812-180 COIL-PEAKING;EL0606RA iBuH^J
04301 62137-103-380 TRANSISTOR;KSA 733-Y TAPG
04302 62137-103-380 TRANS ISTOR.KSA 733-Y TAPG
04303 62137-302-740 TRANSISTOR ;KSC 945-Y TAPG
04304 62137-103-380 TRANS1STCR;KSA 733-Y TAPG
04305 62137-701-013 TRANStSTOR.KSR 1004 TAPG
04306 62137-701-020 TRANSlSTOR;KSR 2001 TAPG
04307 62137-103-380 TRANSISTOR;KSA 733-Y TAPG
R4301 61048-177-751 R-METAL FILM.RM i/BTS 750-J
0303 61048-177-122 R-METAL FILM RM 1/8TS 1.2K-J
0305 61048-177-122 R-METAL FILM RM 1/BTS 1.2K-J
0306 61048-177-224 R-METAL FILM;RM 1/8TS220K-J
0307 61048-177-750 R-METAL FILM.RM 1/8TS 75-J
0310 61048-177-473 R-METAL FILM RM 1/BTS47K-J
0311 61048-177-751 R-METAL FILM;RM VBTS 750-J
0312 61048-177-820 R-METAL FlLM;RM i/BTS 82-J
0313 61048-177-820 R-METAL FILMRM 1/8TS62-J
0314 61048-177-820 R-METAL FILM;RM i/BTS 82-J
0315 6,048-177-820 R-METAL FILMiRM 1/BTS 82-J
0316 61048-177-102 R-METAL F1LM;RM i/BTS 1K-J
0317 6Ю48-177-102 R-METAL FILM;RM 1/8TS 1K-J
R4318 61048-177-102 R-METAL FILM.RM i/BTS 1K-J
0319 61048-177-102 R-METAL FILM RM 1/BTS 1K-J
0320 61048-177-471 R-METAL FILM.RM VBTS470-J
0321 61048-177-471 R-METAL FILM;RM 1/BTS 470-J
0322 61048-177-471 R-METAL FILM RM i/BTS 470-J
0323 61048-177-511 R-METAL FILM:RM V8TS510-J
0324 61048-177-911 R-METAL FILM.RM V8TSS10-J
0325 61048-277-821 R-METAL FILMiRM 1MT 820-J
0328 61048-177-203 R-METAL FILM RM 1/8TS20K-J
0328 61048-177-681 R-METAL FILMiRM 1/BTS 680-J
0329 61048-177-820 R-METAL FILM RM 1/BTS82-J
0332 61048-177-103 R-METAL FILM.RM i/BTS 10K-J
0333 61048-177-473 R-METAL FILM.RM 1/BTS47K-J
0334 61048-177-121 R-METAL FILM;RM 1/BTS 120-J
0335 61048-177-271 R-METAL FILM;RM i/BTS 270-J
ZD4301 62169-403-824 D1ODE-ZENERMTZ 9.1В
[lOCANO PART-NUue£R OESCFUf TlONiSPEOFICATION
|604 69322-302-222 ASSY IF PACK.X-3 W-PAL B/G*D/K
C401 61453-131-103 C-CERAMIC.CHIR.0805 SC ЮЗКАТ MA
C402 61453-131-103 C-CERAMIC.CHIPiOBOS SC ЮЗКАТ MA
C404 61453-131-103 C-CERAMIC.CHIP.O805 SC ЮЗКАТ MA
C406 A1100-0C17 C-CERAMIC. CH IP; 2012F 104Z
C407 Bl102-0125 C-F1LM;CQ982P 50V T 104J-*0/B5 ECQV1H104JZ3
C408 61617-408-229 C-ELECCEAP 50V Z2M RSS(4X7)
C409 61617-408-010 C-ELECCEAP 50V iM RSS(4X7)
C410 61617-408-010 C-ELECCEAP 50V iM RSS(4X7)
C411 61453-131-890 C-CERAMIC. CHIP10B055A8R2DAT050M
C415 61507-121-471 C-POLYESTER;CQ92iM TAPG 50 V 103-J
C417 51617-404-100 C-ELECCEAP 16V 10M RSS(4X7)
C41B 61453-131-270 C-CERAMIC.CHIP OBOS SA 270JAT MA
C419 A1100-0017 C-CERAMlC.CHIP;20i2F 104Z
C429 61637-204-470 C-ELECCEAP 16V 47M SA(5Xii)
C430 А1Ю0-0017 C-CERAMIC CHlP;20i2F 104Z
CN401 A6010-0414 CONNECTOR-WAFERGC250-1 lP-LS-Sl-МС GAY
CN402 A6010-0414 CONNECTOR-WAFER: GC2S0-, 1P-LS-S1-MO GRY
D401 62169-406-482 DIODE; 1N4148 SAMSUNG
D402 62169-406-482 DIODE; 1N4148 SAMSUNG
FL401 В1245-0005 FILTER-SAW.SAF 38 9MZA80Z
FL402 64527-101-001 FILTER CERAMIC TRAP;TPS 5.5MB TAPG
FL4C3 64527-102-001 FILTER-CERAMIC TRAPJPS 6.5MB TAPG
FL407 64527-103-001 FILTER CERAMICSFE 5 5MB TAPG
FL408 64529-425-030 FILTER-CERAMIC;SFE 6 5MB
Ю401 B4012-0046 IC-LINER;TDA 9800 DIP
L40l 62427-812-109 COIL-PEAKING;EL0606RA luH-K
L402 62427-812-139 COIL -PEAKING ;EL0606RA 1.3<jH-X
L403 62427-010-229 COIL-PEAKING AX1AULAL02 ТВ Z2UH TAPG
L405 62427-812-270 COIL-PEAKING; EL0606RA 27uH-J
L406 62427-812-829 COIL-PEAKING; EL0606RA 8.2uH-J
0401 62137-702-010 TRANSISTOR.KTC 3197-AT(TAPG)
0402 62137-302-740 TRANSISTOR;KSC 945-Y TAPG
0403 62137-701-013 TRANSISTOR;KSR 1004 TAPG
0405 62137-701-013 TRANSISTOR;KSR 1004 TAPG
0406 62137-701-011 TRANSISTORKSR 1002 TAPG
R401 61079-917-101 R-MG.CHIP;RMC 1/10 100-J
R402 61079-917-271 R-MG CHIP.RMC 1/10 270-J
R4O3 61079-917-562 R-MG.CHIP;RMC 1/10 5.6K^J
R404 61079-917-152 R-MG.CHIP;RMC V10 1.5K-J
R405 61079-917-391 R-MG.CHIP.RMC 1/10 390-J
R406 61079-917-390 R-MG.CHIP;RMC 1/Ю 39-J
R407 61079-917-103 R-MG.CH1₽;RMC 1/Ю 10K-J
R408 61079-917-222 R-MG.CHIP.RMC 1/10 2.2K-J
R409 61079-917-151 R-MG.CHIP;RMC 1/Ю 150^J
R410 61079-917-151 R-MG.CHIP;RMC 1/10 180-J
R41 1 61079-917-622 R-MG.CH1P;RMC 1/10 6 2K-J
R413 61079-917-201 R-MG.CHIP;RMC 1/10 200^J
R414 61079-917-331 R-MG.CHIP;RMC 1/10 330^1
R415 61079-917-223 R-MG.CH1P;RMC 1/10 22K-J
R416 61079-917-223 R-MG.CHIP-.RMC 1/10 22K-J
R417 61079-917-104 R-MG CHIPiRMC 1/10 100K-J
R416 61079-917-333 R-MG.CHIP;RMC 1/10 33K-J
R419 61079-917-153 R-MG.CHIP;RMC 1/10 15K-J
FU20 61079-917-823 R-MG.CHIP;RMC 1/10 B2K-J
FU21 61079-917-561 R-MG.CHIP;RMC i/Ю 560-J
R424 61079-917-103 R-MG CHIP;RMC 1/10 10K-J
R425 61048-177-332 R-METAL FILM;RM 1/BTS 3.3K-J
TL401 Al 197-0001 TRANS-DET A;M7Tl/3330l
VR401 61246-106-473 VR-SEMI.RH0614C 47KB
5-11
16. MECHANICAL EXPLODED VIEW/11
PARTS LIST J
|6^?Wlnstrument Assembly...............I*
l6-2jMechanical Parts (1); Top View....11
1б-3. Д Mechanical Parts (2); Bottom View - - -
6-4. Д Housing Assembly - - jif*
6-1
6-1. Instrument Assembly
6-2
|LOC/VNO;:PART-NUMBER;::DESCRtRT10N:SPECIFiCA'nO№
100 62210-0031-00
110 66074-601-410
130 63312-0032-00
140 62002-0009-00
150 «******«««**«
152 **»****»»♦**»
153 **«**t*tt***t
154 62233-0003-02
155 62724-0090-00
180 69333^100-101
190 67158-240-121
191 60504-0040-00
192 67158-230-120
193 67154-101-410
194 67158-240-163
200 DX3W-R
600 *************
601 69312-302-235 69312-302-209
502 69353-302-201
603 69326-302-203
604 69322-302-222
630 63323-0059-00
631 63323-0061-00
632 63323-0060-00
660 69098-220-500
670 *************
FRAME;H1PS 94HB
LEG;VT-1260TPE(BLK)7705 i
COVER-BOTTOM;SECC T0.5
CABINET- TOP;PVC+SECC T0.75
ASSY PANEL FRONT
DOOR-CASSETTE;ABS94HB T2.2
DOOR-FRONT;ABS94HB T2.2 GRY
SHUTTER-RlNG;ABS94HB SPRAY
MASK SPRINGiSUS 304(GE/RCA)
ASSY PART CON-BOARD;HlPS94HB+PVC
SCREW BH;2-4*12 FE FZY
SCREW-TAP TTTE;BH ♦ ТВ 3 L12 SWRCH18A ZPC3 YEL
SCREW-TAP TTTE BH;3X10 FE FZY
SCREW-TAP.PWH:2S-3X6 FE FZY
SCREW-TAP BH:2-4X16 FE FZB i
FULL DECK ASSY;NTSC WINNER DECK
ASSY MAIN;W-PAL/ME/SECAM B/G D/K
ASSY PRE-AMP; 4HD (VK-350/VK-330)
ASSY PRE-AMP; 2HD (VK-320/VK-300)
ASSY OSP;X-3 W-PAL (OPTION)
ASSY I/O;X-3 W-PAL
ASSY IF PACK;X-3 W-PAL B/G+D/K
HOLDER LED;POM M90-44 H37.6 BLK(WlNNER)
HOLDER TR;POM M90-44 H37.2 BLK(WlNNER)
HOLDER PHOTO INTERCOM M90-44 H14.1 WHT
REGULATOR ASSY;X-3 100-240V CP2 EURO
ASSY FH1MER;X-3 PAL________________________1
************* ; Refer to Table Below
^\ГТЕЯ MOTEL 150 1S2 1S3 «00 670
ASSY PANEL-FRONT DOOR-CASSETTE DOOR-FRONT ASSY MAIN ASSYFHIMER
VK-350 VK-330 69000 - 302 - 299 69000 - 302 - 309 64043 - 0043 - 01 64043 - 0093 - 03 64042-0041-16 64042-0065-12 69357 - 302 - 252 69357 - 302 - 217 69371 -302 - 234 69371 -302 - 233
VK-320 69000 - 302 - 300 64043 - 0043 - 06 64042-0041-17 69357 - 302 - 251 69371-302-232
VK-32C/APS.MAR 69000 - 302 - 300 64043 - 0043 - 06 64042-0041-17 69357 - 302 - 276 69371-302-232
VK-300 69000 - 302 - 260 64043-0093-02 64042-0065 - 03 69357 - 302 - 216 69371-302 - 231
6-3
Mechanical Parts (1); Top View
ILOCA.NO PART-NUMBER^ DESCR1PTiON;SPEClFICAT1ON J
901 Rsl' 6050^)0бТ^Я[_ SCREW-MACHINE;BH FP М3 L8 FE FZY
902 V i 60509-0063-00 В SCREW-TAPPING;BH В М3 LB FE FZY
903 I®1’ 60504-0032-00 В SCREW-PH;PH + 3 2.6 Li0 SUM ZN YEL
904 iBw 60509-0059-00 И SCREW-MACHINE;BH FP M2.6 L6 FE FZY
909 67008-126-081 В SCREW-PH;+M2.6X8 FE FZY
912 ЛУ 67094-604-710 Л SCREW-DAMPER;M2.0X7.0 SWCM 10(MFZN2-C)
913 и 67008-123-101 В SCREW-PH;+M2.3X10 FE FZY
916 Ul 67004-126-086 В SCREW-BH;+M2.6X8 WSZN/70391398
951 Щ| 67334-600-310 В WASHER SLIT;PI2.5XPI5XT0.5
952 If I 67304-103-410 И WASHER-PLAIN;3.2X6X0.5 POLYSLIDER
954 91 60534-0024-00 В WASHER-SLIT;ID3 OD8 T0.5 POLYSLIDE
955 60534-0019-00 WASHER-SLIT;A ID5 OD9 T0.5 POLYSLIDE
T201 Sty 61574-0010-01 В REEL DISK(L) ASSY;X3RL03032A
T202 H| 61574-0012-01 В REEL DISK(R) ASSY;X3RL 03031A
T203 Bty 66603-620-110 В BRAKE SUB L;POM(M90-44) NAT
T204 B| 62614-0004-01 И BRAKE SUB(R) ASSY.X3RL02021A
T205 Iff 66674-652-610 В S/P BRAKE SUB "R";SUS304 WPB
P T206 № 62614-0003-01 В BRAKE MAIN(L) ASSY;X3RL02022A
л T207 MR 62614-0002-01 Л BRAKE MAIN(R) ASSY;X3RL02021 A
T208 Bty 66674-652-510 В S/P BRAKE MAIN;SUS304 WPB
T209 Sty 61474-0061-01 В GEAR RELAY S1;PEBAX #6333
T210 Щ 61474-0062-01 В GEAR RELAY S2;POM(M90-44) NAT
T211 1Ы 61474-0060-01 Н GEAR RELAY TjPEBAX #6333
T212 Bf 61474-0063-01 Н GEAR RELAY S3;PEBAX #6333
T214 ^B 62024-0005-01 В BAND TENSION ASSY;X3RL04051A
T215 S| 69000-290-579 В ARM-TENSION ASSY.SECC+SUS
T216 Sty 66674-652-910 SPRING TENSION;SUS304
T217 Bu 61533-0064-00 В LEVER REC S/W;POM M90-44 H12.1 NAT
T218 B| 62724-0075-00 В S/P RECORD S/W;SUS304
T219 Bl 64079-700-454 В HEAD MAGNETIC F/E;VTR-1X2ERS11 -089(X-1)
T220 ^B 69000-291 035 Л ASSY-P.B & G.R(L);X-3
T221 К 69000-291-036 В ASSY-P.B & G.R(R);X-3
T222M 69000-291-004 В FULL REVIEW ARM ASSY;X-3
T223 61544 0032-00 В REVIEW ARM ASSY;SECC+SUS303C+C3604BD
T224 |B 61473-0059-01 Ц GEAR REVIEW;POM(M90-44) NAT
T226 Щ 69000-291-032 В A/C HEAD ASSY;X-3(WINNER)
T228 IKL 61472-0054-01 В GEAR ESCALATOR;POM(M90-44)
Т229 Л^ 61523-0021-01 Л PINCH ROLLER UNIT;X-3A
T23oBfi 61543-0040-01 В ARM PINCH ASSYjSECC 1.6+SUS+C3604BD
Т231 ВБ 62724-0062-01 В S/P PINCH ROLLER;SUS304-WPB
Т232
Т233
Т234
Т239
Т240
Т273
Т274
Т280
Т281
Т282
Т283
Т284
Т285
Т290
Т292
Т300
301
тзоз
Т304
Т305
Т309
63323-0043-01
61604-0003-01
67179-0069-01
66654-617-810
>62724-0117-00
В6010-0248
66029-0296-00
69000-290-560
63073-0015-00
63012-0098-00
61473-0058-01
61473-0056-01
61473-0057-01
62724-0101-00
62724-0082-01
69020-123-012
69020-123-004
169000-390-530
69000-390-012
69000-400-013
69000-400-012
62201-0051-00
66823-0020-00
.66124-601-710
HOLDER ESCALATORS 30%
IDLER SUB ASSY;X3RL 06061A
UNIT-DRIVE PINCH;X-3
CAM TENSION;POM(M90-44) WHT
'sPRING-REVIEW;CS STS304/WPB PI0.45 D5 L5.5
CONNECTOR-WAFER;TMC-E02P-D1 BLK
P.C.B F/E HEAD:1V0T1.6W29L180 VT-350R
ASSY FULL ARM TENSIPN;SECC*SUS*POM*FELT
SUPPORTER-LID OPENNER;POM(M90-44) T2 X-3
BRKT PINCH DRIVE;SECC T1.0
[GEAR CAM PINCH;POM(OL-10)
GEAR RELAY PINCH;PBT #2002
GEAR CAM DRIVE;POM(OL-10)
S/P BRAKE SUB
S/P ESCALATOR;SUS304-WPB
CYLINDER ASSY;CX3-D4S (4HEAD)
CYLINDER ASSY;CX3-S2P (2HEAD)
'UPPER-CYLINDER ASSY;DX1 -D4P/S (4HEAD)
ASSY UPPER CYLINDER;XC1-S2P (2HEAD)
LOWER CYLINDER ASSY:CX3-D4N (4HEAD)
LOWER CYLINDER ASSY;CX3-S2N (2HEAD)
BASE-CYLINDER;ADC12 WHT X-3W
MOTOR CYLINDER;DMVDMT 04B
RETAINER-RUBBER ASSY;SECC+SILICONE
6-6
G • GREASE
0- OIL
CD
i
GO
I
Mechanical Parts (2); Bottom View
60509-0063-00 SCREW-TAPPING ;ВН В М3 LB FE FZY
905 60504-0044-00 SCREW-TAPPING ;ВН + 3 M2.6 L7.5 SWRCH18A ZPC3 YEL
906 60509-0058-00 SCREW-MACHINE;BH FP М3 L4 SWRCH10A
951 67334-600-310 WASHER SLIT;PI2.5XPI5XT0.5
952 67304-103-410 WASHER-PLAIN;3.2X6X0 5 POLYSLIDER
953 67334-601-830 SLIT WASHER;2.5X9X0.5(RED)
В251 66602-603-510 SLIDE MAIN;PBT 6300T(NAT)
В252 61473-0047-01 GEAR LOADING "L” ASS'Y;X-3
В253 61473-0045-01 GEAR LODAING "R" ASS'Y;X-3
В254 66674-652-810 S/P BRAKE CAPSTAN;SUS304 WPB
В255 61472-0055-02 GEAR MASTER;POM(M90-44)
В256 66829-0024-02 MOTOR-D/D CAPSTAN;F2QKB 39 12V DX3W
В257 65274-603-910 BELT CAPSTAN;CY-65
В258 61453-0001-01 CLUTCH ASSY;X3RL10101 A
В259 61473-0051-01 GEAR E/J DRIVE;KOPER(KN333G30)
В 260 61473-0053-02 GEAR WORM WHEEL;NYLON 12
В261 66603-619-510 LEVER SHIFT;POM(M90-44)
В262 61534-0040-01 LEVER TENSION CONTROL:POM(M90-44) NAT
В263 61643-0016-01 SLIDE I B ASSY;X3RLO2O21 A
В264 62724-0129-00 SPRING-RELEASE BRAKE;SUS304 WPB
В265 67179-0068-02 L/D UNIT ASSY;X-3W
В266 66824-0013-01 L/D MOTOR ASSY;RF370C+POM
В267 69000-291-056 WORM LOADING ASSY;POM+SUS
В268 62724-0061-01 S/P CLUTCH;SUS304-WPB
В269 61504-0006-01 PULLEY RELEASE;POM(M90-44)
В270 63324-0042-01 HOLDER SHAFT;POM(M90-44)
В271 69000 291-054 CON WAFER ASSY;WAFER+FPC+LEAD WIRE
В272 63011-0097-00 BRKT LOADING;SECC E20/20(T1.2)
В275 66203-0007-02 PROGRAM S/W;SMRS30A(K-ALPS)
В277 63374-0002-00 HEAD BRUSH ASSY;SECC+CARBON
В278 62614-0005-01 BRAKE DD CAP ASSY;X3RL02021 A
В295 60504-0070-00 SCREW-TAP TITE;PWH + В М3 L8 SWCH1018 YEL
Т205 66674-652-610 S/P BRAKE SUB "R";SUS304 WPB
4. Hou; in< A; mbly
6-8
PART-NUMBER
DESGRIPTI0N;SPECIFICATI0N
900 60509-0061-00 SCREW-MACHINE;BH FP М3 L6 FE FZY
910 60509-0062-00 В SCREW-TAP T1TE;BH ♦ TS М3 L6 FE FZY
917 67154-101-420 Я SCREW-TAP PWH;2S-3X8 FE FZY
H500 62052-0004-00 IF/L HOUSING ASSY;X-3 FL28300A
H510 62202-0029-00 CHASSIS-UPPER:SECC E20/20 T1.2
H520 63322-0044-00 I HOLDER-CASS ASSY;X3FL11120A
H530 62203-0027-00 И CHASSIS SIDE *L’ASS’Y;X3FL02020A
H531 62203-0028-00 CHASSIS SIDE’L’ OUTSERT;SECCT1.2+LUCEL/KEPITAL
H532 61533-0043-00 LEVER DOOR;LUCEL-N109-LD/KEPITAL F20-03
H540 62203-0025-00 CHASSIS SIDE "R* ASS’Y;X3FL08080A
H541 62203-0026-01 CHASSIS SIDE 'R';SECC T1.2 LVCEL
H542 61474-0080-00 И GEAR RACK ASSY;SECC T1.6+SWPB
H543 61473-0064-01 gEAR-JOINT;LUCEL MR-320/KT-20
H544 62724-0067-00 SPRING LEVER DAMPER;SUS304 WPB
H545 61533-0042-00 LEVER DAMPER:LUCEL N109-LD/KEPITAL F20-03
H546 62724-0112-00 SPRING-GEAR RACKjES SWPB РЮ.5 D3.5
H550 61043-0025-00 SHAFT ARM ASSY;X3FL05050A
6-9
SYSTEM CONTROL
IC601 HD6433724
сл
Ш
cc
+ о
u.
H □
u.
> VIDEO
DHZT
smmLE . SHU. ’ LE 'D
VD
rllFI DET “4 F7 DE
ZNDE
pwr DET 3OWER DE
BU 5V
SVO DATA SVC DA
SVO CLK
STEP SLOW T' 'LOW
OSD DA
DSD STB 0S0
OSD CLK
DM02
DMC
DM CT
VT PWM
rM FZR
□ □ □ Q Q □ □
IT I (L I I I I
□
- cl a.
CL _
Y Y ‘ H
7. BLOCK DIAGRAMS
Page
7-1. Total Wiring Diagram................ 7-2
7-2. Cylinder Phase Control.............. 7-3
7-3. Cylinder Speed Control.............. 7-3
7-4. Capstan Phase Control............... 7-4
7-5. Capstan Speed Control............... 7-4
7-6. Audio Playback Process.............. 7-5
7-7. Audio Record Process................ 7-5
7-8. Luminance Playback Process.......... 7-6
7-9. Luminance Record Process............ 7-7
7-10. Chrominance Playback Process........ 7-8
7-11. Chrominance Record Process.......... 7-9
7-1
Total Wiring Diagram
(ХЭ02
<1 Рч К-И
2 =fl Al 41-fl
3 f 0 A* 5K • 3
ГС k# S* v □
5 яес sew : □
6 «С 12» П
7 REC «V r
EW co* □
s w ce □
PRE AH=> 10 4 Rl IENV r
> t ST 29G m
1! cc и
4 SV E
4Q 41
t ЧС
CN303
*1S * SV 3
12 Rir*fff J¥ E
31 15 E
4 1Э i-*6E :n ffi
5 20 0
6 21 5:MCH H 211
1 22 SECam н i
iJ S« *
2« ЯЕИ c OUT !<l
5 SKtU C IN =1
CN304
25 '.я И 261
2 4PC WQfi 27l
2= м лт 0
2S з: 00X3 IM СО* OUT F E
31 QC5I * STIC И
32 C.STC E
з: В
3* V IN га
NTSC H ЕГ
CR3V03
CX3V01
CX3V02
FULL ERASE HEAD ASS' Y
RAJ.
5USE «*0
r/E
-Ц so______
AUDIO/CONTROL HEAD ASS' Y
CN502
СЭнТЦ,
+10
1XID
7-2
MAI
□4601
04602
E К 2 EV iHi 1
2 FCOCW
3 KEY IK 2 3
KEY IN I
5 61 5
6
c a 7
e G4 a
9 95 9
c 66 .o
r? 67
L' Я ’2
Я 13
ЗЕБ I
15 so в 15
SE3 c
26 в J
26 t 1!
19 25 f 19
a s9 20
21 4 set 7
2 -MV
26 П 23
'4 26 i 24
p 26 i 25
E £6 к
i X г.ar IF-t 2
QC T
1Л v »
3 ui * l ;ч 3
?£
5 ОС 5
•ns: x •-
AUTO (FT
:«k cn.
NEScUN И
H!-C7*IXACR '
ac jv
«. 54 !?
J SCTTU VO 13
< 5-ЕЯЕ0 .4
•« Xk ’5
NC
04702
04731
F/TIMER
*:xo
AUDIO
14
IN
7-2
7-3.
DM PG
7-3
Capstan Phase Control
Capstan Speed Control
7-4
Audio Playback Process
Audio Record Process
7-5
£
IC3Q1
IC302
* VIDEO OUT
Luminance Playback Process
VIDEO IN
SP
CHI
LP
CHI
CH2
CH2
Luminance Record Process
IC3Q1
За
secam c-process
rominance Playback Process
Viutu IN
LP AMP
7-11. Chrominance Record Process
R D
s w in 38| 37| LU CD u> 33] и GJ ►* О 29 | ги CD 142 си СП ru tn ru ru LU |22_ ru >* ги о ID CD CD *-* tn t-* t-* LU ru ►* о ID CD CD tn u UJ ru ►* \mode pdA NO \ n о к*
1 BB- ri 00 4. а/-га| T nJ CD T ru CD r л. * CD о о о ф 1 о О О СП О 1 tn о ID о ID О to |o.E/4.9| О 1 CD о о tn О tn tn О О UI СП ф о to tn О tn о о 1 tn о о J О p CD |o. 3-2.4 О о О 1 CD о 1 О tn
1 ru CD $ rb □3 $ CU CD ‘r CU CD $ ru CD r м CD о о сл о ID 1 О о о СП о 1 tn о ID О ID о to p s ID О 1 00 о р tn о 1 tn о tn о о 1 tn о U1 о о 1 ID о 1 ID tn о tn о о 1 tn о p О p CD О 1 ru U) О о О 1 Л. CD о 1 о §
1 Ш T ru CD CU CD $ nJ CD * ru CD л» CD о о рГ о л. ? о о СП о J1 о ID £ ID ? ID О ? ID О CD о р UI о ch о tn о о ch о о ch о О 2 ID О 1 ID tn о tn о о Jl о |o. 4-4. 4 О О CD о ru UI о о О 1 CD о 1 *-* u> CD
g ID CD CD tn л LU ги н> о СП ID СП CD СП CD CD CD tn CD CD LU CD ru CD ►* CD О сл ID S 3 tn CD tn tn tn tn U) tn ru tn ►* tn о ID m A. CD tn £ UJ й k* \mode pin\ NO \
2.5 СЛ О tn О tn о tn О о I tn о о 1 tn о О о 1 1Л о * ID 1 о * ID 1 О Н- ги ►* ги о ►* О 1 ж Ф Ф О 1 tn О О 1 tn о tn о О U) о U) tn о V I (У 0 8 * 1 ru CD ru 05 & ги 00 & & СЛ
2.5 tn о tn о tn о tn о о 1 tn о о 1 tn о О о 1 tn о 2 #- ц> »-* м- СП О 1 ID Ф О 1 tn о о ih о tn о ы о ы tn о |4.7—28 CD I 1 & £8 8 & & 1 ru 00 & & Й Й
1 tn о tn о tn о tn о о 1 tn о о 1 tn о о о 1 tn о ID 1 О л, ID 1 О ►* СП О 1 Ж ID Ф о tk о о th о о tn tn о о LU о LU tn о V ги CD J*. CD ru CD £ ru CD rl> CD n!> CD ru CD n!> CD n!> CD n!> CD
F1
BAND -► BAND
vcr/tv V R / T
0 'T :xi T1
VP ILK
HI D TL
C ,P F D
DUALHIM0N02 DUA. H MONO
HI AD
8. CIRCUIT BOARDS
|O.S.P (OPTION)
8-3
I/O
IF-PACK
Main
8-5
Function/Timer (VK-350/VK-320)
8-6
Function/Timer (VK-330/VK-300)
8-6
8-1
з-е
иО1В|ПбЭЦ
L-8
8-2. Pre-Amp
CHIP Parts
8-3. O.S.P (OPTION)
CHIP Parts
8-3
sueddIHO
V-8
MOVd-dl S-8
O/l
’W
8-6
Main
8-5
Function/Timer (VK-350/VK-320)
Function/Timer (VK-330/VK-300)
8-6
REGULATOR
•-1. Regulator
—VA—
R1O1
2- 7(2W)
NOTE:IF YOU CHECK THE VOLTAGE FOR
CIRCUIT. YOU MUST USE | PRIMAF
COMMON TERMINAL •=
C105 ZZZ
100UF/400V
R112
75K(1/4)
R102
75K11/4)
R103
150K11/2) .
ZZZ
C122
2- 2UF/250V
R110
C112
SC222
(Y-CAP)
Cill
SC222
(Y-CAPI
9-2
REGULATOR
□LTAGE FOR PARTS IN HOT
AS A
(MARK)
75KI1/4)
0101
,K(l/4)
D104
EU02
0103
EU02
F102
250V2A
0106
EU02
L102
20uH
R103
K(l/2)
cioe
223
R115
33(2Wl
C122
-/250V
DIOS
ERC90M-02
—AAA—
R109
1K( 1/4)
R112
75KI1/4)
R114
33K(2W)
1000UF/25V
(105 ’C)
—АЛЛ—
R110
5. 1(1/4WI
0107
FMP-G12S
R105
7T 33(1W)
-----------1----’
C109 *^R1O6
,47UF/lO0V^31°fw,
R104
33K(2W)
JC106
473/630V
ZC110
100UF/25V(105’Cl
ZtZC114 ZZZC115
2200UF/10V 330UF/25V
(105 *C)
22V J ' ZZZC116
" e rm н
.C107
100PF/1KV
Zfi C113
330UF/50V1105 C)
i/e)
5
6
1
(OPEN)
Dill
EU02
---АЛЛ----
R113
1- 5K( 1/4)
ZZZC120
100UF/16V
zpcns
10UF/100V
i kD105
UF4007
2
3
SE PRIMARY GND
a T101
ZL EER3530
DIOS
EU02
zzzcue
47UF/50V
L103
8uH
C117
330UF/25V
10102
PQ12RF11
CN101
GND
6- 5V
16- 5V
aiv
AL 12V
-30V
33v
+4. 4V
-4- 4V
TO POWER
ON 151
0110
EU02
SPECIAL NOTE
AU mteffded araiits and талу other umiaoruiucior
devwa arc elaooaatwalfy sensttrve and therefore re-
quire the special handUng techniques described under
I the 'electmslaricclfy sensitive (ES) devices’ section of
| this semce тапшй.
NOTE
Do na use the part number shown on this dramgfor
ordering The correct part number is shown m the parts
Ust. And may be sSghtfyd^erent or amended once this
drawing was prepared. ' "
IMPORTANTSArerrNOTICES
Components tdent^ied with the mark fishave the special
dnntczisticsfor sfcty when replacing any of tlxac
compooentt. Use only the ume type.
9-2. Power
□162 1N4002GP
^ROM
CN151
REGULATOR
CN1O1
5. 6V
Q151
C2328
0151 ▼
1N4148""
£151 AZD151
560
-----H—
0 D155^‘
1N4002GP
ZZZ C152
Л 10/16
□ 156
R1003
□ 154
A928
R166
820(1/4W)
0154
1N4002GP
R152
220(l/4W)
*R163
22K
—Wr
0153 1N4002GP
□ 163
C2328
0152 1N4002GP
0163
1N4002GP
OSP ONLY
C151 £
330/25 Y
C2323
1N414B
ZD 152
5. IV
R157
1. 5K
R159
1. 5K
□ 157
AS28
R160
3-9K
□ 155
A643
R156
1. 2K
X.
cu
о
о си
S£z
OO
*
9-3
POWER
TO AUDIO
»-5»jPC 12V
»уй) V. REC 12V
TO Y/C2
5V
»-(ргГ)рс SV
>-(₽«) pc 12V
1 PB 5V
V. PEC 12V
REC 5V
TO SERVO
PC SV
cm s+
DM B+
MOTOR GNC
TO TUNER
ди 5V
♦-y4j33V
»-(ртГ)рС SV
»-Cpt7)PC 12V
TO I/O (MAIN)
AL 5V
AL 12V
PC 12V
PB 5V
D157
1N4002GP
FROM/TO SYSCON
-----------1--------»-CreT) DC +4. 4V
-------]---------->-(геГ)DC -4. 4V
i----------------------------»-Сйз)-30У
1------------ PS«)BU 5V
-------------►~C”s) AL 5V
I--------------------«/ess) CAP B+ CTL
----1-------~---------PS7)LM B+
----------------------pct) PC 5V
----------------------<<Pg)PWR CTL
———-----------------</psw>p REC V
----------------------4~C rely D PB V
SPECIAL NOTE
AU inteffuted circuits and many othersemiconductor
devices are electrostatically sensitive and therefore rt~
quire the special handbag techniques described under
the ’electrostaticallysensitive (ES) devices" section of
this service manual.
NOTE
Do not use the part number shown on this drawing for
ordering. The correct part number is shown in the pans
HsL And may be sH^itfydifferou or amended since this
drawtg was prepared.
IMPORTANT SAFETY NOTICES
Components identified with the mark have the spedal
charatcrisba for safety when replacing any of these
components. Ute only the same type.
SYSTEM CONTROL
9-3. System Control
CN602
IC606
GM3
LN A LIN
[5
GTC
DUAL
CN601
: CHIP
sw
PARTS
sep f
seg g
NTSC н
AUTO DET
DC 4.4V (F+)
ABOCON
KEY DC
KEY INI
G1
HI-FI/HIX^NOR
PC 5V________
AL5V_________
SUTTLE AZD
LD601
*A6B4 IK
ЖИ648
CSUTLY)
G7
ier*<»-4j
104
ЖНБ14
ratfl
ЖЙ607
LOADING UNIT
0601
KA733
0604
1N4002
СДР B+ CTL
LM B+
PC 5V
PVR CTL
0 REC v
ЖЯ667
TO F/TlbER
CN702
□
□
□
П
E
B!
E
E
E
E
E
*0611
6Ш
IKSHH w
0643
<EM3 S0JSOR>
CSTAAT SeGOR>
CTAKE-tP>
*A6L2
510
IC607
KA7533P
W
1K
seg a
seg 0
seg c
seg о
16
17
-30V
TO F/H1MER
CN701
TO POWER
DC
-30V
BU 5V
ЖЙ613
ЖД605
0601
1N414S
ШС606
10u/16
IC602 KA0301
• 5tlW|
PROG e
ЖН602
5 IK
ЖА601
1.2K
жвбоа
: iK
ICE
km9:
9-4
1
1
SPECIAL NOTE
All Inttgnutd circuit] and many other temlconductor
devices art electrostatically sensitive and thenfon nr-
quirt Ле specialhandling technique! described under
Ле ‘electrostatically sensitive fES) devices' tecrion of
Л11 service manual
NOTE
Do not uie Ле part number shown опЛ1а drawing for,
ordering The correct part number it shown in the parts
list. And may be tUg/ufy different or amended tinea this
drawing was prepared. . ..
9-4. Servo
RED
----------- CYLINDER SPEED CTL
-----------CYLINDER PHASE CTL
FROM/TO Y/C2
ЖС227
FSC
SW 25HZ
QUSI V SYNC
C-SYNC
LP H
SP H
ROTARY SW
ENV COMP
HEAD AMP SW
HEAD AMP SW
NTSC H
FROM/TO
SYSCON
DMC1
DMC2
STEP SLOW
CM CTL1
CM R/F
INDEX
SW 25HZ
CTL CD
CAP FG CD
SVO CLK
SVO DATA
FEAD CTL
SEARCH H
CM B+ CTL
LP H
PS H
CM CTL2
FROM
PC 5V
CM B+
DM B+
MOTOR GND
*:CHIP PARTS
9-6
SPECIAL NOTE
All integrated circuits and many othertemlconductor
devlcet are electrostatically sensitive and therefore re-
quire the special handling techniques described under
the ’electrostatically sensitive (ES) devices’ section of
this service manual,________________________
NOTE
Do not use the part number shown on this drawing for
ordering. Tht correct part number is shown in the parts
list. And may be slightly different or amended since this
drawing was prepared.
V)
ж
Л
<
0
"ZTI.'CR °CS
CCEE NC : 55029 - 0416 CO
SERVO :
IC201
\mode pin\ NO \ STOP REC PLAY \hode pin\ NO \ STOP REC PLAY
1 2.5 2-5 2.5 31 2.5 2-5 —
2 2.5 2.5 2.5 32 2.5 - -
3 2.6 2.6 2.6 33 5.1 5.1 5- 1
4 2-6 2.6 2.6 34 0-5 0-5 0-5
5 1-4 1.5 1.5 35 5.0 5.0 5.0
6 2.5 2.5 2.5 36 5.0 5.0 5.0
7 2.5 2.5 2.5 37 - — -
a 0 0 0 38 0 0 0
9 2.5 2.5 2.5 39 5.0 5.0 5.0
10 0 0 0 40 0-5 0-5 0-5
11 2.5 2.5 2.5 41 0-5 0-5 0-5
12 2.3 2.3 2.3 42 0-5 5.0 0-5
13 0.1 0.1 0.1 43 5.0 5.0 5.0
14 5.1 2.6 2-6 44 0 0 0
15 2.5 2-5 2.5 45 0 0 0
16 0 2.6 2.6 46 0- 3-4.1 0- 3-4. 1 0- 3-4.1
17 0 2.6 2.6 47 5.0 5-0 0- 4-5
18 0 2-6 2.6 48 0.4 0.4 0.4
19 0-8 2.5 2-5 49 0-6-5 0.6-5 0-6-5
20 5-1 2.5 2.5 50 0.6-5 0- 6-5 0.6-5
21 5.1 2.5 2.5 51 5-0 0-5 0-5
22 5.1 5.1 5.1 52 5.0 5.0 0-5
23 0 0 0 53 0 0 0
24 2.5 - 2.5 54 0-5 0-5 0-5
25 2.5 - 2.5 55 0 0 0
26 0 0 0 56 0 0 0
27 2.5 2.5 2.5 57 5.0 5.0 5.0
28 2.5 2.5 2.5 58 0 0 0
29 2.5 2.5 - 59 - - -
30 2.5 2.5 - 60 2.5 2.5 2.5
ЬиИИ
IC201-2 IC201-24 IC201-25 IC201-31 IC201-32
25mVp-p 5.4Vp-p 5.4Vp-p 2Vp-p 1.8Vp-p
PB
600mVp-p 5Vp-p 3.7Vp-p 2.5Vp-p 100mVp-p
PB ST1LL/SLOW PB PB PB
9-7
о
О
IC201 КА8321
tr
О
Q
Z
о
о
ш
Q
О
ш
о
о
и
о
ш
О
О
О
tr
I
и
и ш
О
ш
□
О
о
ш
О
О
О
О
U
Q
СП
э
(Л
ш
Ш
о
сл
D.
S
о
tr
Ш
(Л
Ш
(Л
DRUM COMMON
DRUM FG IN
DRUM SELECT A
DRUM SELECT В
DRUM MIX AMP 0UT1
DRUM MIX AMP (-)
DRUM F/V OUT
GND
DRUM MIX AMP (+)
SW 1
DRUM P/D OUT
SW J
NTSC/PAL
CAP P/D OUT
CAP MIX (+)
HA-SLT
VP
EFF
AFF
VFF
SFF 30
POWER ON RESET
GND
FSC IN
WRITE
DUTY I/O
CTL CLOCK
A VDD
CFG IN
(Л
О
a
X
о
ш
□
<
ш
tn
о
о
(Л
(Л
О.
<
о
ш
(Л
о
о
и
Q
Z
о
Q
и
и
и
о
(Л
о
9-5,
Y/C -1 (Pre-Amp)
RED
PB Y PROCESS
REC Y PROCESS
9-8
г к я
a w
8 Н
а пик сп.
В FK______
В МАЛСН Н
В кем н
В Д* "
В мтсал
а жгу с тн
И 1Л тякх н
В ус руст
а < ал
В со« |н
8 со« ал
В с-тттс
И OBI V SYHC
В w
К У IH
« нтк и
BLUE ---------- PB C PROCESS
---------REC c process
SPECIAL NOTE
AH Integrated circuits and many other semiconductor
devices art electrostatically sensitive and therefore re-
quire the special handling techniques described under
the 'electrostatically sensitive (ES) devices’section of
this service manual.
NOTE
Do not use the pari number shown on this drawing for
ordering. The correct pari number is shown in the parts
list. And may be slightly different or amended since this
drawing was prepared.
PRE GND
EP/SP CTRL
COMP. ON/OFF CTRL
HEAD SW CTRL
PRE AC-FB CHI
PRE CHI
PRE CHI- 2 GND
PRE IN CH2
PRE AC-FB CH2
PRE AC-FB CH3
PRE IN CHS
PRE CHS. 4 GND
PRE IN CH4
PRE AC-FB CH4
HEAD AMP SW.CTRL
REC GND
REC EP OUT
IC301 BA7277S
AGC OUT (E
AGC OUT (C
AGC DET-FILTER
PRE PEAKING
PRE CHROMA OUT
ENV DET. FILTER
ENVE. OUT
PRE Vcc +5V
ENVE- COMP. OUT
ENVE- DET- CHI- 2 FILT
ENVE- DET. CHS- 4 FILT
PRE Vcc +12V
REC Y. C IN
REC CURR- UP
REC FB
REC SP OUT
CHIP Parts
N. C
DOC PULSE
DE—EMPHASIS Q
COLOR TRAP
PB H
SP H
N- C
VCA FILTER
CCD OUT
1
GND
CCD IN
IMAGE CTL
SECAM H
REC C OUT
PB C IN
PB H
ACC FILTER
LP TRACK H
APC FILTER
VXO Q
‘fsc
IC302 SVH-350
CARRIER
ROTARY IN
LP H
DOC STOP H
PB FM IN
AGC DET
V IN
BGP OUT
VCC
V OUT
QUSIV SYNC
SYNC OUT
CSC OUT
AGC FILTER
CSC IN
Vcc
COMB IN
N. C
COMB OUT
VCO FILTER
SLD FILTER
FILTER CHANGE
APC FILTER
APC ERROR
GND
PRE GND
EP/SP CTRL
COMP. ON/OFF CTRL
HEAD SW CTRL
PRE AC-FB CHI
PRE CHI
PRE CHI- 2 GND
PRE IN CH2
PRE AC-FB CH2
PRE AC-FB CH3
PRE IN CH3
PRE CH3- 4 GND
PRE IN CH4
PRE AC-FB CH4
HEAD AMP SW.CTRL
REC GND
REC EP OUT
IC301 BA7277S
AGC OUT
AGC OUT (C)
AGC DET-FILTER
PRE PEAKING
PRE CHROMA OUT
ENV DET.FILTER
ENVE OUT
PRE Vcc +5V
ENVE- COMP. OUT
ENVE- DET- CHI- 2 FILTER
ENVE- DET. CH3. 4 FILTER
PRE Vcc +12V
REC Y. C IN
REC CURR. UP
REC FB
REC SP OUT
- 2
IC3S01
\mode pin\ NO \ STOP REC PLAY
1- 2.75 2.75 3.75
2 3.25 3-25 1.3
3 5-0 5-0 0-45
4 1.95 1.95 O.B
5 1. 15 1. 15 1.3
6 3. 75 3.75 0-45
7 1.7 1-7 0.2
В 1.7 1.7 2-4
9 1-7 1.7 1-2
10 0 0 2. 15
11 0 0 2.95
12 0 0 0
13 0 0 1.5
14 0 0 4.45
15 0 0 5.0
16 0 0 2.55
17 0 0 3-45
IB 0 0 2- 1
19 0 0 3.0
20 1- 05 1.05 1.35
21 1-B 1-B 1.35
22 1-05 1.05 1-05
23 1.05 1-05 1.05
24 1-7 1-7 1-4
25 3-35 3.35 3-4
26 5.0 5.0 5.0
27 3.1 3.1 3-15
2B 3.15 3.15 3-15
29 0 0 0
30 2-5 2.5 0
IC3S02
\mqde pin\ NO \ STOP REC PLAY
1 3-5 3.5 3.7
2 0 0 1. 05
3 0 0 0
4 3.6 3.6 3.6
5 3.6 3.6 2.55
6 0 0 0
7 3.65 3.65 3-B
В 0 0 0
9 1.35 1.35 1.35
10 0-45 0.45 0.5
11 3.4 3.4 3.4
12 4-25 4.25 4. 10
13 3.55 3-55 0
14 4-15 4-15 4.2
15 5 5 5
16 5 5 5
9-
2
IC3S01 BA7107S
REC ZPB
C BELL
REC 5v
REC
REC COL( BIAS
VIDEO
REC/PB BPF IN
REC 2BM BELl TER
2BM T BELL IL
COL OU
NC
PB COL( BIAS
PB BEl
PR 5'/
REC; i. 07 BEL
GND
LIMITER FILTE
REC/PB:4. 3M BPF
PC5V
PB = 4. 3M BPF IN
SYNC GATE PULSE
C-SYNC
SYNC GATE PULSE
PB AMP DUT
PB = 4. 3M BPF 01
NC
—>x2 FILTER
PB
PB
PB
SYNC
IL
BURS
HZ
PB COLOR IN
GND
PUL
BURS
5M BPt-
GND
।JNNTNG
COMP
=>C5V
IC3S02 BA7025L-
01 r|DET|
UT
C0MP1
C0MP2 |
(O'
IEG
PB
COL
GND
MD
ilGP
COMP
uMP
sec н/ pal
ME ВЕС
C5V
^EL CONTROL
9-6
Y/C-2
RED
---------- SECAM REC C PROCESS
----------SECAM PB C PROCESS
9-10
SPECIAL NOTE
All Integrated circuits arid many other semiconductor
devices are electrostatically sensitive and therefore re-
quire the special handling techniques described under
the ’electrostatically sensitive (ES) devices’section of
this service manual
NOTE ’
Do not use the part number Shown on this drawing for
ordering. The correct part number Is shown in the parts
list. And maybe slightly different or amended since this
drawing was prepared '
<
0
I i;
N
9-7. Audio
RED
PB PROCESS
REC PROCESS
:nsoi
AUDIO
HE AO
R1 10
CONTROL
J=AO
AUDIO
ERASE HEAD
FROM/TO
A/C HEAD
REC CURRENT l->
REC CURRENT 1+)
CN502
1 F/E HEAD 1
г GND г
TO F/E HEAD
* CHIP PARTS
in
Cd
*R501
10K
L501
100U
REC/EE
CONT
AM
R520
R502
[ AUDIO REC BIAS |
0SC501
xR52
C520
47/25
*C527
220©
C524
103®
*R517
100
*R520
47K
*R519
1-5K
-VW
VR501
47KB
*R51
5.6K
103®
-C515
33/16
Fi *R510
C519 560
102®
C50
10/35
L502S
15mHi
(2) V
RIPPLE
FILTER
PB/EE
ICONT
RIPPLE
FILTER
LPSW
CONT
8K*JFF
HJTE
CURRENT
PROTECT
L504
100UH
*R516
330K
C51B
/50
E
5
4
0525
502 M0X
1
2
3
9-12
SA
SA
SA
FROM SYSCON
A-MUTE
DL
DL
SA-4J LP
PB A
REC A
H
FROM/TO
I/O(MAIN)
MAU AUDIO IN
MA2JAUDI0 OUT
TO SERVO
{SA^CTL ( + J
<sa|)ctl (-}
FROM
PA UPC
POWER
12V
FROM POWER
SPECIAL NOTE
/4/? fnwyiTfrd rirruifs and mam OthermnicofuiuCiOf
devices are electrostatically senstrve and therefore re-
quire the special handling techmques described under
the ‘deamraticalfy sensitive (ES) devices'section of
this service manual._______________________
NOTE
Do not use the part number shown on this drawing for
ordering. The correct part number is shown in the parts
list. And may be slightly different or amended since this
drawing was prepared.
IC501
3IN N MODE STOP REC PLAY
PIN 1 0 0 0
PIN 2 0 0 0
PIN 3 0 0 0
PIN 4 0 0 0
PIN 5 0 0 0
PIN 6 0.6 0.6 0.6
PIN 7 0 0 0
PIN 8 3.3 3.3 3.3
PIN 9 3.7 3.7 3.7
PIN 10 0.6 0.6 0
PIN 11 3.7 3-7 3.7
PIN 12 0 0 0
PIN 13 3.7 3.7 3.7
PIN 14 0 0 0
PIN 15 0 0 0
PIN 16 1.5 1.5 1.5
PIN 17 4-2 4-2 4.2
PIN 18 9. 1 9. 1 9. 1
PIN 19 12- 0 12.0 12-0
PIN 20 0 0 0
PIN 21 0 0 0
PIN 22 0 0 0
PIN 23 4. В 4. В 0
PIN 24 0 5. 1 0
1С501-20
1.3Vp-p
REC
1C501-21
150mVp-p
PB
ICS01-2S
100m Vp-p
REC/EE
ICS01-30
3Vp-p
PB
IC501-30
ZBVp-p
REC/EE
9*13
f
REC VCC SW OUT
GND
RIPPLE FILTER OUT
LP SW1
HEAD SW2
SLP SW1
LP-SLP SW2
PB EQ IN
EQ NFB
GND
EQ OUT
PB LINE IN
AUDIO LINE IN
ALC FILTER
ALC DET IN
IC501 LA7295
tv
&Y
ff/6/
REC E-E CTL
HEAD SW1
VCC
PB/E-E CTL
MUTE ’ H'
SLP ’ H'
REC IN
rt
LP SW3
ev
SLP SW3
mr
mini
mV
—♦LINE OUT
MV
--RIPPLE FILTER
W
।— GND
ev
LP ' H'
♦ REC OUT
NEE
ox
zw
Г
J4A1
COAXIAL-CABLE
CN401
k* GND
RJ CH 2 OUTlOPSKl
Ы CH 1 OUTlFHl
* IF VIDEO OUT
1Л AGC
от IF IN
PC 12V
от PC 5V
Ш AFT +/-
о A.MUTE
к* VPS CLK
vps data
4
to
I
co
Ф
PACK
*CHIP PARTS
TUNER
FROM/TO/
I/O (MAIN)
FROM POWER
9-9. IF-РАСК
FROM/TO
TUNER
CN402 CN401
CH 2 OUTIGPSKl 2
CH 1 OUTlFMl 3
if video out ♦
AGC 5
IF IN___________ 6
PC 12V 7
pc 5v__________ a
AFT +/- 9
A/MUTE 10
VPS CLK и
VPS DATA
9-15
D401
1N4148
*;CHIP PARTS
SPECIAL NOTE
' All integrated circuits and талу other semiconductor
devices are electrostatically sensitive and therefore re-
quire the special handling techniques described under
the 'electmtancalfy sensitive (ES) devices'section of
, this service monuaL
NOTE
Do not use the pan number shown on this drawing for
ordering. The correct part number is shown in die parts
UsL And may be slightly different or amended since this
drawing was prepared
10
O.S.P (OPTION)
м C909®
BLINK
OSD ROM
OSD RAM
7
ADDER
REGISTER
0904
C945 SWITCH
0905
C945 SWITCH
*R953
3„3K
*R911
6-2K
1.906
100U
*C927
223©
____<----
DATA
REGISTER
?------
2i
1
0. 47/50
7
U
*R927
777*R91B
10K
*R936
10K
C929
10/16
OJ
ru
о
in
in
LD
о
л
5KC903
27P©W«
*R94B
IM
XT901
17- 7M
SYNC
OSCI CK ’
SYNC
GEN
VIDED SIGNAlj-
GENERATIDN
SERIAL
REGISTER
* CHIP
SYNC
DET
V SYNC
SEPAR СКГГ
INPUT
CONTROL
DISPLAY
OSCIDKT
PARTS
+:rs
100
DISPLAY
CTL CKT
CONTROL
REGISTER
DIV
28- 5/38.6
VCO
FREOrP
DET
PHASE
DET
TIMING
GENERATION
SYNC U
SEPAR
inx
— о
O>OJ
ctnj
9-16
*R912
IM
-тт
L905
100u
*R913
2. 2K
0901 .
0945 I
SWITCH
*R914
10K
-Wv-
*R937
47K
С918
104©
“*0911
T 120F©
D901
1N4148
0902
1N4148
*0924
103©
*0920
103©
*0923
103©
L904
lOuH
*R921
20K
*R922
39K
*R925
56K
* R933
2- 2K
0919
100/16
-H-
*R926
100K
0921
4-7/1Б NP
*R924
IK
0922
47/16
-Hr
0902
A733
BUFFER
0903
0945
BUFFER
*R916
100
SPECIAL NOTE
АЛ inteffuted circuits and many other saniconductor
devices are electrostatically sensitive and therefore re-
quire the special handling techniques described under
the 'elearostaticalfy sensitive (ES) devices'* section of
this service manual.
CN901
1 SYNC DETECT 1
- 2 MESECAM H 2
- 3 SECAM H 3
- 4 PC 12V 4
- 5 OSP V. OUT 5
- 6 PC 5V 6
- 7 AL 5V 7
- 8 OSP V. IN 8
’y GND 9
- 10 OSP CLOCK 10
11 DSP STROBE 11
- 12 OSP DATA 12
FROM/TO
Y/C2 C3V04
NOTE
Do not use the part number shown on this drawing far
ordering The correct part number is shown in the parts
list. And may be slifftdy different or amended since this
drawingwas prepared.
IC901
\hooe pdT\ NO \ SIGNAL OUT BLUE OUT
1 0 0
2 0-4.4 0-4.4
3 3.6 3.6
4 - -
5 - -
Б 0 0
7 4.4 4.4
6 0 0
9 - 1.6
10 - -
11 - 0.6
12 0 0
13 - 1.7
14 o. 1-4.1 4.0
15 0. 3-2.9 0
IE 2-2 2.3
17 - 4.8
IB - 0.5
19 1.75 5-0
20 0 0
21 5.0 5.0
22 0-B
23 0.8 0.B
24 2.2 2.1
25 0.6 0.6
26 0
27 0 0
28 - -
29 - -
30 0-3.7 0-3.7
31 0-3.7 0-3.7
32 3.7 3-7
D~GND
OSD CLOCK
AC
OSC2
OSD STROBE
OSD DATA
REF
C VIDEO OUT
C VIDEO IN
A-GND
LPF
C SYNC OUT
AFC IN
AFC FILTER
9-17
1
W
I
о
О J _l Z
о < < Н
> о н
I н z о
m
_|
(Л
о:
н
m
о
z
(Л
сс
Q
W
I-
Z
о
с
Z
>
(Г.
I/O (SUB PCB)
TP4301
AV A IN (LI
AV A OUT (LI
AV V IN
AV V OUT
IC4301 KA8403
GMD
04305
i^lOC
47/1Б
L4311
47/16
R4335
04301
R4315
62
C4324
82P
C4330
47/16
C4327
10/16
04307
А73Э
С4Э07
10/16
C4328
270P
C4301
4.7/25
L4302
lOOuH
H4314
82
R4317
IK
R4318«
IK
H4326
20K
H4329
82
AMr
04309
223©
И+С4323
W 100/16
CN43O1
1 Т.Д.Я IN 1
2 C+ А Я IN 2
3 C+ A L IN Э
4 HI-FI А Я OUT 4
c HI-FI A L OUT 5
6 PF А Я OUT 6
7 PF A L OUT 7
a AV А Я IN 6
9 AV A L IN
10 MJDI3 IN
11 LN A.L-IN
12 T. A.L IN 12
13 ЗМЭ 13
14 >c 14
15 P65V 151
4.7/25
С4Э02 Z2Z
L4301
100lH
C4303
R4333
47K
04306
R2001
FROM/TO
ZO (MAIN)ON43O2
CK4302
|1 1
2
3 It43UT CTL3 3
4 INPUT CTL4 4
5 INPUT CTL5 5
6 AV CTL 6
7 MOD CTL 7
6 T.V IN 6
9 LN V. IN 9
10 VIDEO IN 10
11 C. V our 11
12 AL 5V 12
13 AL 12V 13
14 PF OUT 14
15 PC 12V 15
FROM/TO
I/O(MAIN)CN4301
-A/W
R4334 IC4302
120 КА84ОЗ
R4325
82011/4WI
04306
10/16
R4316
C4310
10/16
04302
4733
9-18
SPECIAL NOTE
AU integrated circuit! and many other semiconductor
devices are electrostatically sensitive and therefore re-
quire the special handling techniques described under
ths ‘electrostatically sensitive (ES) devices’section of
Ms service manual
NOTE
Do not use the part number shown on this drawing for
ordering. The correct part number is shown In the parts
list. And may be slight ' different or amended since this
drawing was prepared.
О
Й
c
CD
9-12. I/O (MAIN PCB)
cu
о
(П
FROK/TO I/0(SU9)CN4301
1 a 3 4 5 6 7 8 9 10 11 12 13 14 15
z cc -< | CANAL A R IN (canal A L IN I HI-FI A R OUT |hi-fi A L OUT | | IT A R OUT | OF A L OUT s a * 5 |aV A L IN HI oiorw| s -J -< 3 | K11Y1| g g in e
LU г 3 4 5 6 8 9 10 11 13 14 IS
4 + J
FROM POWER
AL 5V
AL 12V
PC 12V
PB 5V
* CHIP PARTS
9-19
FHOM/TO I/0(SUB)CN4302
1 2 3 4 5 Б 7 8 9 10 11 12 13 14 15
n
й
й
О
8
10
>KRC02*RC01
100К WOK
8
а
£C01
□COZ
рсоз
1N414S
IN 4148
1N414S
SM:
SK
SM2
SM4
SM5
FR0M/T0
TUNER
—i мп
м.Т= J Т. A L OUT
AF V IN
>----(МТ5 у RF A IN
FROM/TO
Y/C2
MY2
VIDEO OUT
MY1
VIDEO IN
FROM/TO AUDIO
AUDIO IN
AUDIO OUT
SPECIAL NOTE
AU mttffvted draats and many other semiconduacr
devices are electrastaticaify sensitive and therefore re-
quire the special handling techniques described under
the 'eieanxtoncally sensitive (ES) deuces'section of
this service manuaL
NOTT
Do not use the part number shown on this drawing for
ordering The coma part number is shown in the parts
UsL And may be sSghtfy different or amended since this
drawing was prepared.
шгайНсмимЕв»
;;sm
9-13. Function/Timer (VK-350/VK-320)
RM701
SBX1610-82
REMOCON
MODULE
□UT
C701
47U/16V
9-20
AM
-4
KEY IN a
4 KEY IN 1
1t ’ 1
6 G1
e G2
7 G3
В G4
9 G5
10 G6
И G7
12 G8
13 G9
14 SEG a
15 SEO b
16 SEG c
17 SEG d
-4- 18 SEG e
19 SEG f
20 SEG g
21 RESET
22 -30V
23 SEG h
i4 SEG 1
25 SEG }
£8 SEG к
Z7 CO 4.4V (F-)
FROH/TO
9YSC0N
CN601
SPECIAL NOTE
All Integrated circuits and many other semiconductor
devices an electrostatically sensitive and thenfore n-
quin the special handling techniques described under
the "electrostatically sensitive (ES) devices" section of
this service manual.
NOTE
Do not use the part number shown on this drawing for
ordering. The correct part number Is shown In the parts
list. And may be slightly dijfennt or amended since this
drawing was pnpand.
FU NCTION/TIM ER
FU NCTION/Ti n/i E R
9-14. Function/Timer (VK-330/VK-300)
RM701
SBX1610-B2
_ REMOCON OUT
| MODULE
C701
47U/16V
9-21
10 06
11 G7
12 08
13 G9
14 SEG a
IS SEG b
16 SEO C
17 SEG d
18 SEG e
19 SEG t
20 SEG 0
21 RESET
22 -30V
23 SEG h
24 SEG 1
25 SEG )
26 SEG к
27 ОС 4.4V IF-I
FROM/TO
SYSCON
CN601
| SPECIAL NOTE “
Ail Integrated circuits and many other semiconductor
devices are electrostatically sensitive and th erefore re-
quire the special handling techniques described under
the 'electrostatically sensitive (ES) devices'section of
this service manual.
NOTE
Do not use the part number shown on this drawing for
ordering. The correct part number Is shown in ths parts
list. And may be slightly different or amended since this
drawing was prepared
REMOTE CONTROL
LCD Remote Control
15
*} IT02
“ GL536
»RT04 f
з-з
IT01 I«
GL538 1‘
SEGll
SEblO
VSS
KTout
n
Х1Л
S < < S 5
DT01
1N414S
DT02
1N4148
*CT01
33P
ryyV
*RT02
33K
XTOl
32- 76{KHZ]|
й «I 8
nT ri' S' О CJ> О о сэ о
DT04
1N414B
DT03
1N4148
SEG30/PB. 6
SE631/P8.7
COMO
COMI
COM2
COM3
BIAS
VL.CO
WLC1
VLC2
PO.O/IKT4
PO- 1/SCX
P0-2/S0
P0.3/SI
Pl-O/IKTO
Pl- 1/IMT1
P1.2/IMT2
Pl-C/TCL
P2-0/70.0
P2. 1
P2.2/CL0
P2.3/BUZ
P3.0/LCDCK
St
a
a
a
LCD
co co
m m
♦ QTOl
C2412K
IClOOBl
ЖОТ02
C2412K
(ClOOBl
»RT01
330K
* ICT01
KS56C820-59
22P
*CT04
XT02 30P
2- 42S6MHZ 'll!
S3 *CT03
30P
CT05
2- 2/6- 8
9-22
t
•<><->< Vх l-z
REMOTE CONTROL
VDD +3V
*CT07
106 ______
'6.3 104©
1.5V
1-!
5V
OPTION BE NOT BE
0Т0Г SP/LP SP ONLY
DT02 50 POSITION 51 POSITION
DT03 VPS NON VPS
ЭТ04 РОС NON PDC
* OR
CHIP PARTS
2
VCR/TV POWER/TIMER
г °- о О— О кз О— кв 0“ <j> К7 О—
4 5 6 7 в 9
кю О— > О км О— ко О— • к»« О— । О к»з О—
CH. J, 0 сн. “j4 SLOW “j4 REC/OTR STOP/EJECT PAUSE/ Дм
> Kia О— > К1Э О— । 0 кго О— О кг» О— 1 । О кгг О— i । О кгз О— > О К24 О— _|
REW PLAY X 2 FF CLEAR/ REg^ DISPLAY PROGRAM
О K25 О— > О к» О— 1 • 0 KZ7 О— 1 О кзо О— 1 । О кз» О—1 1 । О кзг О—। 1
DTR OUTPUT INPUT SHIFT
КЭ4 O—1 > 0 кв О—1 1 К37 О—' О кэз 0—' 1 > О кз» О—| _1
ERASE AFT INDEX TRK.'j4 TRK-J, A-DUB MARK
K41 0—1 > О «42 О—< I КМ7 Q—< ► К44 О > K4S 0—1 О К46 О—< 1 о К47 0—< (j) К4в О—1
GO TO SHUTTLE CLOCK/ COUNTER SHUTTLE •
О K49 O—< 1 К12С О—1 О К127 О—1
VPS/PDC SP/LP TRANS ’LCD СНХЗ^ЕТ LCD I PFmiAM 1
О KS7 О—* 1 КЗ» О— «so О—। км О—< О К64 О—|
I
drawing was prepared.
NOTE
Do not use the pan number shown on this drawing far
the "dectrosiancaify jocntnc (ES) devices* section of
this service manual.
I
I
SPECIAL NOTE
LCD
REMOTE CONTROL
9-16. W/0 LCD Remote Control
3V
ICT01
KS 51800-05
KEY NAME
K2 VCR/TV
КЗ POWER
K5
КБ 2
K7 3
K9 4
К10 5
К11 6
К13 7
К14 8
К15 9
К17 CH DOWN
К18 0
MJ un ur
К20 SLOW +
К21 REC/OTR
К22 STOP
P/S
К24 SLOW -
К25 REW
К26 PLAY
К27 FF
КЗО CLEAR/RESET
К31 DISPLAY
К32 PROG.
К34 D.TRK
К35 OUTPUT
К37 INPUT
КЗВ SHIFT
К39 X
К41 -
К42 ERASE
К44 INDEX
К45 TRK +
-
К50 SEARCH
К52 CLOCK/COUNT
— —
К59 SP/LP
К81 DOWN
К83 UP
—
К93 OK
К104 BLUE
К106 CL/REV
Kill TEXT
К112 MIX
К116 RED
К117 AFT
К11В INDEX PAGE
К119 GREEN
К120 YELLOW
К121 1
К126 SHUTTLE “
К127 SHUTTLE +
9-23
IMPORTANT SERVICE NOTICE
1. Service Option
For this chassis of VCR. the sensor (start I end I reel) are located on the Main PCB not in the deck assembly.
There is a important service option that has to be followed to repair Main PCB without "deck assembly” connected.
To imitate the function of the sensor, push the "SERVICE" key (SW721) on the Function/Timer PCB.
See diagram below.
VK-330/VK-300
Two types of Function/Timer are used for Model: VK-330/VK-300
(One is with service key, another is without service key)
TYPE WITH SERVICE KEY
TYPE WITHOUT SERVICE KEY
How to imitate the function of the sensor;
Short-circuit between W701 and W740 using wire-jumper temporarily.
FUNCTION/TIMER PCB (TOP SIDE)
NOTE J|-----------------------------------------------------------------------------------
To release the imitated function of sensor, push the "RESET" key on the Function/Timer PCB or
unplug the AC power cord and plug it again.
2. How to use the Service Jig
To have extended service ability for this unit, you must purchase the "Service Jig for X-3 Chassis VCR".
NOTE |---------------------------------------------------------------------------------
This service jig can be used for several models of Samsung VCR's.
Please keep it for future use.
Jig Item Code NO. Description Sketch NO.
Extension
Cable 1 68140-300-103 Use for Cylinder Motor ♦—> Main PCB (CN201) Connecting Cable A
Cable 2 68140-300-105 Use for Regulator (CN101)<—» Main PCB (CN151) Connecting Cable в
Cable 3 68140-300-106 Use for A/C Head (CN001)<—> Extension Cable 4 Connecting Cable c
Cable 4 68140-300-107 Use for Deck <—> Main PCB (CN202, CN6O3) Connecting Cable D
Special Dover 68140-500-100 Use for X-Pomt Adjust / Tape path Alignment E
3. Extension Cable Connections
4. How to operate the VCR without a cassette tape
NOTE |-------------------------------------------------------------------
First, push the "SERVICE" key (SW721) on the Function/Timer PCB.
Method 1: Press the top of the lever lock (L) and (R) simultaneously, then push the cassette holder.
All function will work in this mode.
Method 2 : Remove two (2) screws securing the upper chassis, then lift up the upper chassis. Push the cassette holder.
All function will work in this mode.
REMOVE TWO (2) SCREWS
CONTENTS
1. GENERAL DESCRIPTION
1 -1. Safety Precautions ---------------------- 1-1
1-2. Electrostatically Sensitive (ES) Devices - i-2
1-3. Replacement Procedure for Leadless (Chip)
Component__________________________________ 1-3
1-4. How to Replace Leadless (Chip) Component.. 1.5
1-5. Cleaning and Lubrication_______________ 1-7
1-6. Abbreviations.......................... 1-8
2. DISASSEMBLY
2-1. Instrument Disassembly-------------------- 2-1
2-2. Circuit Board Disassembly______________ 2-2
2-3. Tape Transport Mechanism Identification--- 2-4
2-4. Housing Ass’y Removal & Reassembly-------- 2-6
2-5. Cylinder Ass'y Removal & Reassembly------- 2-10
2-6. Reel Disk Ass'y Removal............... 2-14
2-7. Loading & Capstan Motor Ass’y Removal &
Reassembly_____________________________ 2-17
2-8. Tape Transport Ass'y Removal---------- 2-23
3. MECHANICAL ADJUSTMENT
3-1. Tape Transport System__________________ 3-1
3-2. Reel Torque........................... 3-6
4. ELECTRICAL ADJUSTMENT
4-1. Preparation........................... 4-1
4-2. Program Switch Tuning Chart------------ 4.2
4-3. Servo, Audio & Tuner Section___________ 4.3
4-4. SECAM Section__________________________ 4^4
5. ELECTRICAL PARTS UST
5-1. General Information.................... 5-1
5-2. Electrical Replacement Parts List...... 5.2
6. MECHANICAL EXPLODED VIEW/
PARTS LIST
6-1. Instrument Assembly_______________________ 6-2
6-2. Mechanical Parts (1) ; Top View........... 6-4
6-3. Mechanical Parts (2); Bottom View--------- 6-6
6-4. Housing Assembly.......................... 6-8
7. BLOCK DIAGRAMS
7-1. Total Wiring Diagram................. 7.2
7-2. Cylinder Phase Control________________ 7.3
1-3* Cylinder Speed Control................ 7.3
7-4. Capstan Phase Control_________________ 7.4
7-5. Capstan Speed Control__________________ 74
7-6. Audio Playback Process................ 7.5
7-7. Audio Record Process.................. 7.5
7-8. Luminance Playback Process............ 7-6
7-9. Luminance Record Process.............. 7.7
7-10. Chrominance Playback Process......... 745
7-11. Chrominance Record Process —......... 7.9
8. CIRCUIT BOARDS
8-1. Regulator........................... 8-2
8-2. Pre-Amp............................... 8-3
8-3.0.S.P (OPTION)......................... 8-3
8-4. I/O.................................. 8-4
8-5. IF-PACK_............................. 8-4
8-6. Main................................. 8-5
8-7. Function/Timer (VK-350/VK-320)....... 8-6
8-8. Function/Timer (VK-330/VK-300)------- 8-6
9. SCHEMATIC DIAGRAMS
9-1. Regulator---------------------------- 9.2
9-2. Power................................ 9.3
9-3. System Control....................... 94
9-4. Servo................................ 9-6
9-5. Y/C-l (Pre-Amp)._.................... 9-8
9-6. Y/C-2—............................... 9-10
9-7. Audio................................ 9-12
9-8. Tuner................................ 9-14
9-9. IF-PACK.............................. 9-15
9-10.0.SP (OPTION)........................ 9-I6
9-11. I/O (SUB PCB)....................... 9-18
9-12. I/O (MAIN PCB)...................... 9-19
9-13. Function/Птег (VK-350/VK-320)....... 9-2Q
9-14. Function/Timer (VK-330/VK-300)...... 9.21
9-15. LCD Remote Control.................. 9.22
9-16. W/0 LCD Remote Control.............. 9.23
TAPI TRANI О T Ml HANI M NTH С Г ON
iew
su LE IVE CH RE LA’
EA •r AR ТЕ SI AS ’Y ER AS
G. SPRING IE SION 23. GEAI REUfl ’T’
2Y AS VE ;/w
"L ’L BRAK
R) '6. RECORI W 26. RAKE MA R" ASS
4EVI ;w SC "L 27 "R"
A/C BR
CH ROLI
GE
EJI CT
(яре Transport 4echaiTsm ew
CT
MO 01 D/D CAPSTAN EA
:lt PS AN CLUTCH ASS'Y
C TAN
S/P RAK CAPSTAN S/P RAKE
G LO G S/ RELEASE
Lil ER MO MAI
AR О UNI "L ER TENSIO NTRO
TO NG
OADING NIT ASS’